similar to: Interfacing to NEC Xen Master PBX

Hello all. I have an NEC PBX connected via a TE210p E1 line to an asterisk 1.6 box. NEC -> E1 -> TE210P:1 -> * -> TE210P:2 -> E1 -> Telco Incomming calls from the telco to the asterisk box to the NEC work fine with indials and everything. Works sweet. Outbound from the NEC to the Asterisk box fail. Giving an long dial tone that then times out. Ie, pick up NEC handset, dial

Hi All: We have cooperation PBX as NEC, I am wondering how to replace our legacy ACD by using Asterisk, but not losing tie line connection to NEC. Does anyone have any idea how to make it work? Many thanks, Tilein

the Telco, I can make calls in. What I am trying to get though is how to pass through the DID range. The E1 that I am connecting to the Telco with, used to connect direct to the NEC system and already has hunt group calling enabled for all 30 channels. Also, I was given a 100 number indial range (from 00 -> 99). If the E1 is connected to the NEC directly, I can call 5555 7320 and the NEC

I am currently attempting to get Asterisk working with our existing NEC IPK 192 system. The * box has a Wildcard X100P clone card in it and is hooked to an analog port on the NEC system. The analog port is shared between an elevator phone and a credit card machine. I have one SIP extension configured in * which the softphone on my Windows PC is registered to. With the softphone I am able to

Hello. I am new to R. And, I want to perform a multiple nested anova on a large datasets (with 9448 observations). Under the helps from R-Sig-ecology mailing list, I have gained many progresses. But I still have some confusions. I want to ask for some helps here. my dataset("SeedL.txt") was not attached. Data are not sorted by factors. In this dataset, "SpecN"

Hi, How can I make calls from Asterisk client to NEC NEAX 2400 traditional phone ? Is it possible to have a connection between Asterisk and NEC NEAX 2400, since NEC-NEAX2400 is an IP-PBX and supports SIP. Please help me to find a solution ;;; Thanks & Regards Ram Kumar Customer Support Engineer Barcode Gulf LLC Dubai , UAE Mobile : + 971 50 5594178 Email : Ramkumar@barcodegulf.net

I have an nec electra elite 192 with a t1 card; and am looking for suggestions as to integrating them (can't throw out the system yet!). I have a fully working asterisk server -CVS-04/27/04-19:01:05- (found a hp d220 for $350.00!), 2 digium t100p cards, a plain t1 with loopstart signaling, and 2 working bt102 grandstream ip phones (thanks again Matt for your "start from scratch"

Hi, I'm am currently in the process of trying to integrate an * box with an NEC Electra Elite IPK. Currently, we have 7 POTS lines coming into our building. These lines are plugged into our NEC using the appropriate analog line interface card from NEC. The NEC effectively has NO configuration done to it, other than to make all the internal phones ring when a call comes in. We also

I am trying to setup an extension in asterisk which dials an extension on the NEC DSX. i.e. If an asterisk user dials 402 I want it to connect to the NEC DSX @ 192.168.1.57 and connect to extension 402. ( 404 would be the NEC DSX sip account that I have the credentials for ). [402] deny=0.0.0.0/0.0.0.0 secret=pass1 dtmfmode=rfc2833 canreinvite=no context=from-internal host=dynamic type=friend

Dear Supports, I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked! Could you please give me some hints? Thanks in advance! Here are my environments: ------------------------------ CentOS-5.3 Kernel-2.6.18-164.el5 asterisk-1.6.1.6 dahdi-linux-complete-2.3.0+2.3.0 libpri-1.4.10.2 OpenVox-B800P(the first port is spliting into

hi. i connected Asterisk to an NEC NEAX system with a crossover T1 cable and the Digium TE405P using E&M wink signaling. the connection's ok. however when dialing from the NEC to the Asterisk. most of the time the Asterisk only sees the first digit of the dialed number(which is 4 digits). some time if i dialed the 4 digits very fast it might get through. seems like there's a timming

Hello, we’d like to propose the integration of a new backend into LLVM: NEC SX-Aurora TSUBASA Vector Engine (VE). We hope to get some feedback here and at EuroLLVM about the path and proper procedure of merging. The SX-Aurora VE is a Vector CPU on an PCI-E Accelerator card. It has 48GB memory from six HBM2 stacks, accessible with 1.2TB/s bandwidth, 8 cores with vector and scalar units, each.

hi * users, anyone out there ever come across, worked with or heard anything about NEC's Univerge SV7000 Telephony Server? Link is at http://www.univerge.nec.com/products/list/sv7000/sv7000.html I'm just wondering whether it's as flexible, programmable and configurable as Asterisk. It also looks like they've got a whole range of IP phones

I have done additional testing and I haven't been able to figure out why it's failing. Since my original testing we now set the realm on the authentication section to match what we receive from NEC. It's of the format abc at xyz.com I have verified the md5_cred several times and it matches the user:realm:password formula 3016:insiph at something0a646666.com:3016 where username is

Is there anyone out there who has tried to connect up an asterisk box to make and take calls through a NEC NEAX 2400 using Q.sig or anything like it? Can anyone tell me if it is possible? Thanks in advance, Phil Allred Brooklyn Law School

I'm using QSIG between an NEC SV8300 and Asterisk (after giving up with CCIS). Things work pretty well with the exception of issues on stations on the SV8300. When I call from Asterisk to a SV8300 station and I send my extension as the caller ID number, it shows up on the SV8300 as "OPERATOR". I've tried a few different TON/NPI values with no difference. If I set callerid to a

Hi, so I just bought a NEC 1300A, primarily, because it allows me to write DVD+ and -RW. Using DVD-R discs (and currently no options to try other media, due to shops being closed), I'm unable to write anything, using either the dvd+rwtools port, or the dvdrtools. I've exhausted all references to be found in google, which are in a language I understand, so I'm hoping the list can

On Mon, Nov 17, 2008 at 10:20 AM, Tony Mountifield <tony at softins.clara.co.uk > wrote: > > If I do this from an NEC digital extension I get 141496920000, but if I > do > > it from an NEC POTS extension I get 1942124000 > > That looks like when you pick up the analogue phone and dial 9, it > immediately opens the outgoing line and sends the 141 acces code, but >

Forgive me if this question has been asked/answered in another post. And let me reiterate what other users have frequently said - Asterisk is great, and I really appreciate all the work you folks have put into it. How have some of you gone about integrating Asterisk with a legacy office PBX, such that the end-user can use a regular office (digital handset) and dialing is fairly seamless ? Our

Hi i need to install a server with this hardware: 1 OpenVox B800P 1 OpenVox A800P01 4 OpenVox FXS-100 FXS100 4 OctWare SoftEcho SOFTECHO Do you suggest 1.2 or 1.4 branch? Is now 1.4 stable ? I've tried 1.4 the last year but i've experienced many problems with misdn drivers. Thanks -- /*************/ nik600 https://sourceforge.net/projects/ccmanager