similar to: UK dialing tone

Hi, Now that I have Asterisk up and running I would like to find a good SIP gateway in the UK. I have looked at sipgate.co.uk and they look pretty reasonable. I am looking for peoples recommendations. Apologies if this is the incorrect forum for this type of request. Regards, -- --[ UxBoD ]-- // PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import" // Fingerprint:

Hi, Odd problem have just noticed in that when I call into the PBX DAHDI detects the call and hands it off to the extension, if I then hang up it still continues to process through the dialplan. This is what I have in chan_dahdi.conf: [channels] language=en echocancel=yes usecallerid=yes cidsignalling=v23 sendcalleridafter = 2 hanguponpolarityswitch=yes rxgain=2.0 txgain=3.0 progzone=uk

Hi, I've noticed that sometimes instead of getting a regular ring tone when calling out on a Zap channel, I get this obnoxious loud noise which forces me to hang up. Is this a problem in the Zaptel driver? I seem to recall that ringback tones are generated by zaptel when dialing out from a SIP phone over a Zap trunk. Thanks.

Have a problem which can't find solution to on WIKI.. Trying to get * to use UK based indication tones. i.e. british ring, dial tone, busy signal. Have changed the indications.conf file to default to UK. However this seems to have no affect. What am i missing. Am using 1.0.3 stable. Many thanks Andrew. ---------------------- indications.conf [general] country=uk [uk] description =

Hello! I migrated asterisk 11 to 13 as user of FreePBX 12.0.76.2. As customer of German Telekom, I have three numbers and therefore three trunks - each number is bound to one trunk. After migration, some callers complained about missing ringback tone: they didn't hear any ring tone and where surprised that they suddenly got me anyway :-). The connection afterwards was as expected. Deeper

Hi everybody, Every time callers reach my FXO port, asterisk produces one ring tone just before it executes Answer(). How to remove this? I have commented "#define RINGBEGIN" on zconfig.h, but it does not help. Thanks in advance for your help. Cheers, Anto -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Built a new server at the weekend and install Asterisk 1.6.0.9 and IAX and SIP work great :) The one problem I am having is getting the OpenVox (TDM400 type card) to work. It is successfully identified using WCTDM kernel module and dahdi_scan picks it up just fine. The issue is when I try and setup dahdi_channel.conf as it fails everytime. When running asterisk -rvvvv I see the port pick

Hello folks, I'm having trouble configuring Asterisk to play an "invalid extension" message to anyone dialing an undefined extension. First I tried using the 'i' pseudo-extension, but it didn't work at all; searching the wiki I found that page: http://www.voip-info.org/tiki-index.php?page=Asterisk%20i%20extension where it basically says that the 'i'

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

I am using Asterisk (Debian unstable packages) with an OH323 connection to my provider. Everything is working except for the generation of ringback tones when I receive inbound calls from the PSTN. My provider tells me that we're sending call progress indications and that because of this they're expecting us to generate the ringback tone. Does anybody know how to configure this in

Hi, Could anyone tell me how to read the values in the "zonedata.c" file? I am looking at the "zt_tone_ringtone" field mainly. Thank you. Jad Wauthier -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070512/4c0387be/attachment.htm

Hello, I am using an incoming iax provider to bring calls to my server. When an incoming call comes in, the calling party does not hear a ring tone. I figured that this was no big deal, and that I just needed to enable the "r" flag to dial. This has not fixed the situation though. Just to try to make sure the line was being picked up properly, I tried the following: [inbound] exten

Hi, I have been using Zapateller with a TDM400 no problems at all, but recently I have ported our BT number to a VoIP provider, and have a strange problem. When I phone our number I first get the BT unavailable three tone sound, and then it actually connects the call via IAX2. So, I disabled zapateller in the dialplan and tried again. Would you believe it worked fine. Has anybody else come

Hi, I have PRI configured and up but when i am dialing outside i am not getting any ringback tone but my call is connected. following is my example SIP----------------->PRI ------------> mobile I have set progress=yes in chan_dahdi.conf but still not working if i call inbound from my mobile to internal extension ringing working please help me -S -------------- next

Hello, We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to the telco, users mainly use snom 320/300 SIP phones. When dialing to an external phone number with custom ringback music, users reported that they could not hear the music but can only hear the standard ring tone generated by the system. Is there any kind of settings need to allow the ringback music pass to the

Any ideas on why callers who call into my customer's SIP trunk are not hearing a ringback tone? I had this on one other asterisk system, and wound up needing to set progressinband=yes in the SIP trunk config. I have set this on the current system & restarted asterisk, but to no avail. I am using: AsteriskNOW distro Asterisk build is 1.6 from AsteriskNOW repository:

Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!! I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please: dahdi_scan ---------- [1] active=yes alarms=OK

Hi, I have recently upgraded from CentOS 5.1 too 5.2 and now run Xen 3.0.3. What would be the best way to upgrade too Xen 3.2.1 ? I presume I would also need to change my network settings for xenbr0 aswell ? Any help would be greatfully appreciated. Regards, -- --[ UxBoD ]-- // PGP Key: "curl -s http://www.splatnix.net/uxbod.asc | gpg --import" // Fingerprint: F57A 0CBD DD19 79E9

Good morning, i've noticed many times that there are IVRs that play a ring tone just before bridging me to an agent. My asterisk does not behave like this but i've always wanted to. I'm now playing with 1.6.2.9 and i've read in queue's doc: http://www.voip-info.org/wiki/view/Asterisk+cmd+Queue R ? stops moh and rings once an agent is ringing (Asterisk Trunk) (in

hi: When iam sending calls through sip a fake ringback tone is generated and then call status can't be viewed (if call is ringing,busy,offline) it just rings and rings. Can i disable this? Thanks in advance. _________________________________________________________________ Windows Live?: Keep your life in sync.