similar to: wcte12xp0: Missed interrupt. when disable echocanceller

Dear asterisk users, We want setup TE121 digium board: Model: Digium TE121: VoiceBus technology allows the TE121 to use an industry standard bus-mastering PCI Express interface. http://www.digium.com/en/products/digital/te121.php My platform Server: HP Proliant 150 G5 OS: UBUNTU x86_64 GNU/Linux Asterisk: 1.4.21.2 zaptel: SVN-branch-1.4-r4662M When we enable zaptel driver for TE121, the

Hi, I have been trying to get a Wildcard TE122 card running here the last couple of days. libpri and zaptel are all installed and configured to E1 specs. The jumper on the card is on, so configured for E1 (I'm in Norway). When running zttool, I get 'Alarms: RED' on the single card installed. Other information in zttool: Current alarms: Red Alarm Sync source: Internally clocked

Hi All, I have followed below steps to enable echo cancellation. # cd /usr/src # wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 # tar xjf linux-2.6.28.tar.bz2 # tar zxvf dahdi-linux-2.1.0.4.tar.gz # ln -s /usr/src/dahdi-linux-2.1.0.4 /usr/src/dahdi # mkdir /usr/src/dahdi/drivers/staging # cp -fR /usr/src/linux-2.6.28/drivers/staging/echo /usr/src/dahdi/drivers/staging # sed -i

I am about to setup a new machine and based on a thread in the freetel-oslec list, I came across the idea of compiling Intel optimizations in when using oslec w/ dahdi. So I edit dahdi-linux-complete-2.1.0.4+2.1.0.2/linux/drivers/dahdi/dahdi_config.h to #define CONFIG_DAHDI_MMX which on its own wont compile. It was suggested to edit dahdi-linux-complete-2.1.0.4+2.1.0.2/linux/drivers/dahdi/Kbuild

Hi guys, Hope someone can help me with this... I got an Asterisk with TE120P card... using dahdi 2.1.0.4 and asterisk 1.4.24. The problem is the link between the card and the telco... suddenly through the day looses connection... and the people on site just power cycle the PC and the problem got fixed.... for a while.... I've already replace the cable between the card and the telco. Telco

Hi All, Which echo cancellation is good between OSLEC and MG2. Dahdi by default use MG2 echo cancellation on channel. If i want to use OSLEC then what should i need to do ? Do i need to recompile dahdi with OSLEC ? -S -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi. My configuration is Elastix 1.5.2-2 (asterisk 1.4.24, libpri-1.4.3-5, dahdi-2.1.0.4-7 ) and OpenVox d210e connected to telco provider (Euro ISDN). Here is my /etc/dahdi/system.conf: # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=oslec,1-15,17-31 # Span 2: TE2/0/2 "T2XXP

In order solve my incoming caller ID problem, I upgrade the dahdi to version 2.6.1 from version 2.4.x. After upgrade, I found the echo cancellation doesn't working (I'm using Digium AEX800B PCI Express card). I can hear my self talking on the phone. How to solve this? I think I need to recompile dahdi 2.6.1 with OSLEC support? how? [root at callcenter ~]# dahdi_cfg -vvv DAHDI Tools

Hi, I've a problem: I can't configure DAHDI with ech canceller OSLEC. I have Asterisk 1.4.24 and DAHDI 2.1.0.2. I compiled also OSLEC. But when in /etc/dahdi/systems.conf I insert value echocanceller=oslec,1-4, command dahdi_cfg -vvvvvvvvvvvv give me an error about oslec. Someone can help me? Thanks Marco -------------- next part -------------- An HTML attachment was scrubbed... URL:

Yesterday I pulled in the latest svn of Dahdi and added the files from a recent kernel in the drivers/staging/echo structure and modified the Kbuild file so it would compile without error. I insmod'ed the module in, and modified my system.conf has echocanceller=oslec. cat /proc/dahdi/1 shows: Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER) IRQ misses: 1 1

Hello list, I'm facing a little issue with dahdi attempting to load the OSLEC echo canceller into my current kernel. After compiling dahdi 2.3.0.1 with OSLEC support, I get the following error when set 'oslec' as the echocanceller: DAHDI_ATTACH_ECHOCAN failed on channel 1: Invalid argument (22) - Similar errors are *NOT* present using other echo canncelers. - I tried adding the

Hi, I'm having trouble with one machine that kernel panics with Asterisk 1.4. The motherboard is an Asus P5W Deluxe. I reported the kernel panic here: http://lists.digium.com/pipermail/asterisk-users/2009-November/241006.html I'm now trying to understand if the problem can be an IRQ issue or not. I disabled APIC in the BIOS because I thought that maybe it could be buggy (not sure

Hi, Using Xorcom's bristuff-0.4.0-RC4-xr7.tar.gz (ie asterisk 1.4.25) with an old Junghanns OctoBRI (ie not the 2.0 version), zttool shows every port in TE mode, though half of them are in NT. Alarm column shows OK for every port, such as : OK octoBRI PCI ISDN Card 1 Span 1 [TE] Lay Globally, this system doesn't work (can't dial out through zaptel) Replacing this board

On Thu, 22 Oct 2015 15:06:59 +0300 Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote: > On Wed, Oct 21, 2015 at 01:33:27PM -0200, Ethy H. Brito wrote: > > > > Hi > > > > Who should insert dahdi_echocan_oslec.ko module in Ubuntu 14.04? > > dahdi_echocan_oslec should be built by default. What you may miss is the > 'echo.ko' (OSLEC) kernel module.

Hi, 1. Is there any manual entry about modprobe's options relative to a given Dahdi driver (wctdm24xxp, for instance) ? 2. When loading a wctdm24xxp driver, is there any parameter to pass to modprobe to configure a span in NT/point to point mode ? 3. After running dahdi_cfg -vvvvv , I can read with dmesg : [ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1 in TE mode

Hello, I am installing dahdi on a machine lspci 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01) 00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01) 00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI

I have setup a asterisk with freepbx, a TE122 and i have an ISDN. My problem now is that callers are experiencing echo. checked on dmesg i saw this: # dmesg -c dahdi: Disabled echo canceller NLP because of CED rx detected on channel 2 i searched google but found no soolution and i have no idea what that error means. below are other details that might be of value. # dahdi_hardware

Hello, The harddisk of my etch/bristuffed asterisk1.2 box finally died. I moved the cheap (1397:2bd0) HFC-S card to a squeeze host (i686) and built dahdi modules 2.3.0.1 using m-a. After zaptel->dahdi and asterisk 1.2->1.6 config adaptations, everything seems ok, except for the BRI side, unable to bring layers 1/2 up. Asterisk reports: chan_dahdi.c:12393 dahdi_pri_error: 1 Unable to

Hi, I'm using revision 6822 of Dahdi Tools. # dahdi_hardware pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P # asterisk -rx "dahdi show version" DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC # cat /etc/dahdi/genconf_parameters ... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 NT SPAN/4 NT #

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really