similar to: rxgain / txgain for iaxmodem or hylafax

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

Hello. We are running Asterisk 1.2.23 iaxmodem-0.2.1 and hylafax-4.3.3 When we send faxes the people who receive the faxes complain that they look wrinkled or smashed up. Sometimes they are missing random lines. Has anyone seen this happen, or know how to fix it?

Hi Guys Just wondering if you can help me and give me some pointers on what could be wrong in my setup. Everything seems to be installed. I have Asterisk 1.2.12.1 FreePBX 1.2.3 IAXModem 0.1.15 Chan_capi 0.7.0 The IAXmodem registers, faxgetty is starting in /var/log/messages but it just doesn't seem to pickup the call. In Chan_capi it says fax detected but no fax

Hello all, I have an asterisk box running in a customer with Hylafax, iaxmodem, asterisk 1.2.18. The service can receive faxes, from a lot of fax machines, but there are a couple of them that asterisk Hylafax cannot complete. This calls arrive the asterisk box, asterisk detect that this calls are fax, asterisk answer the call, and then Hangup the call. But hylafax do not receive nothing. When

I'm just wondering here, in our community... Why not HylaFax for Fax solutions? I'm not saying bad about the big efforts on app_tx and app_rx with spandsp. But as me and many other asterisk users, we find out that Hylafax+IAXModem+Asterisk is very reliable. And from what i've been testing and reading, Hylafax is an extremely powerful: "HylaFAX is an enterprise-class system for

Hi, I have problems with asterisk and hylafax+ iaxmodem. I can successfully send faxes to Panasonic KX-FT932 fax, but with Xerox WorkCentre M20i I have problems: No carrier. This is hylafax log, maybe you can suggest me where to find ... Oct 17 07:38:48.22: [22428]: SESSION BEGIN 000000041 180037052390906 Oct 17 07:38:48.22: [22428]: HylaFAX (tm) Version 4.4.2 Oct 17 07:38:48.22: [22428]: SEND

Hi, I've tired to forward a Fax from Asterisk to Hylafax. It works so far until I tried with a Fax machine. I just got error shown in the log below. I'm not sure why. I've tested it with other 6 machines and they all work fine. Do you have any idea why? Pim Hylafax Session log: Apr 12 11:16:48.82: [ 5933]: SESSION BEGIN 000000078 492212601860 Apr 12 11:16:48.82: [ 5933]:

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

I made a little write-up that attempts to synthesise a lot of the information out there about how to get HylaFAX working with Asterisk by way of IAXmodem for inbound faxing: http://blog.evaristesys.com/?p=24 Of course, there are bound to be some things I've left out or are grossly in need of correction. So, before I link it off the voip-wiki I am extremely eager to solicit the input of

Has any advancement been made to get 3102 operational in either a SIP or H323 asterisk environment. A post back in time mentioned a downloader service. >From the posts and articles I have read, the NCP is acting like a bootp and tftp server which uploads the configuration to the phone?? Am I close? if so, where does one get the SIP image for he 3102 and 2102 phones? I had 8 donated, but they

Arch = x86_64 OS = CentOS-6.3 (FreePBX) Asterisk = 11.3.0 (FreePBX) Hylafax+ = 5.5.3 (epel) I am installing an Asterisk server with the intent of having it act as our fax server. The Asterisk system was installed using the current FreePBX distro which is reputedly based on CentOS-6.3. I have installed Hylafax+ from epel and I have built and packaged IAXModem-1.2.0 for CentOS-6 using mock and

Hi, I'm trying to receive faxes using hylafax / iaxmodem but I just can't get it to work. We're using Sangoma E1 cards and have calls coming in over PSTN. I've tried turning hardware echo cancellation off but it makes no difference. This is what I get in /var/spool/hylafax/log: [root at faxhost log]# cat c000000003 Jan 14 12:44:43.39: [ 3403]: SESSION BEGIN 000000003 18005551212

Hi all, I have just setup a trixbox system and I am implementing hylafax/iaxmodem solution for the faxing. When i send a fax to it by phoning in listening to the IVR and manually pressing start to initate the fax, the call gets picked up correctly as a fax and everything works well. When I try sending a fax by entering the phone number and pressing start to initiate dialing it sounds like

Hi All I have been looking around and haven not been able to find a working example I have a fresh/new install of Asterisk 1.6.2.0 with dahdi 2.2.1 and libpri 1.4.10.2 I use a sangoma A200 card so I am using wanpipe 3.4.7 If I use zaptel which I read I need for app_rxfax then asterisk crashes with segfaults on startup asterisk[2624]: segfault at 30353466 ip b7eb538b sp bffda26c error 4 in