Displaying 20 results from an estimated 2000 matches similar to: "Nortel BCM - Call Accounting Interface?"
2006 Jun 03
3
Asterisk + PRI Card -> Nortel BCM
Has anyone fed a Nortel BCM from Asterisk?
I'm interested in switching our company over, but don't want to
replace all the handsets in one fell swoop.
I imagine some of the PRI cards can "emulate" a switch?
I'd still like to pass CallerID into the Nortel, etc but all the
external traffic would be VOIP, not TDM.
2005 Jan 28
2
Nortel --> Asterisk-------->Asterisk
I am looking at setting up the following configuration and any
help/input/comments before signing the PRI contracts will be greatly
appreciated.
PRI Tampa PRI
Sarasota PRI
<--> Nortel BCM-->Asterisk<------------------>Asterisk<--->
I would like to link the Nortel BCM to * using the a digital trunk card.
The BCM will
2006 Mar 09
0
Nortel BCM and Asterisk as SIP Extension
Greetings!
Has anyone - or is it even possible to - set up Asterisk with multiple
SIP Clients to a Nortel BCM switch? The intent is to set up an Asterisk
IVR behind the BCM, have the BCM route calls to Asterisk IVR and then
transfer calls to one of two queues in the BCM based on ANI and some
database information. The wiki (and Google) only mentions PRI,
Line-side T1 or H.323 interfaces to the
2005 May 25
2
Nortel i2004 firmware upgrade.
I've been trying to look up information on upgrading firmware on a nortel
i2004 ip phone. I have this phone leftover from a trial, and it's
supposed to be upgradable to current firmwares. Since I also run a DMS I
was able to login to nortel's site and get all the firmware files, but All
the NTP's regarding firmware upgrading these are how to tell you BCM to
send the file to it.
2003 May 13
2
Nortel i2004 IP Phones
Hello,
is it possible to connect a Nortel i2004, (i2002) IP Phone to an *
PBX?
I have seen on the net that there should be an SIP firmware aviable for
the phone, anyone an idea where to get it? Because orginally they use a
own protocol
to connect to an Meridian, BCM or CSE1K.
Another idea is to write a module for * that can handle this protocol.
bye
SLiME
2009 Nov 04
2
Cisco SPA3102 Thoughts & Other Recommendations
I'm looking to build a VoIP solution for 100+ service vehicles that have
WiFi hot spots installed (with cellular uplinks). Currently we are
trying out Skype wireless handselts and Majick Jack. I'd also like to
consider an Open Source solution that can bring the calls back to our
data center [possibly integrated without our existing BCM 3.x VoIP
PBX].
For hardware someone on the IRC
2009 Jan 24
3
Nortel IP phone i2002 - DHCP server unreachable
Is anybody using Nortel IP Phone?
I have (second hand) Nortel i2002 phone and when it boots I get:
DHCP server unreachable
F/W version: 0604D9C
My setting:
DHCP? [0-No, 1-Yes]: 1
DHCP: 0-Full, 1-Partial: 0
Can any body suggest how to troubleshoot it?
--
#Joseph
GPG KeyID: ED0E1FB7
2003 Sep 09
2
Nortel i2004 and asterisk ??
This are "suppose" to be SIP based phones. I just
got one to play with, no docs, no nothing.
before I start spending time trying to sort it
out I thought I'd ask to see if anyone had made
one work with AST, and if they have any pearls
of wisdom.
mucho thanks
2011 Sep 05
2
Unable to write mbr using syslinux.exe
Hi,
?
I tried to use the syslinux.exe (version 4.04)?to make my usb drive bootable. When i run the syslinux.exe with the respective options I get this error
?
"Accessing physical drive: The request is not supported. Did not successfully update the MBR; continuing..."
?
I have administrator privilege and I started cmd prompt with "Run as Administrator" option too. I tried the
2005 Jun 10
1
Newie Questions
Hello, I'm new to asterisk. My company is opening a new office and I'm
seriously considering using Asterisk for the phone system.
A couple of questions:
How does Asterisk compete with the Avaya IP Office or the Nortel BCM
systems?
I have purchased a Polycom 500 phone but I'm having trouble getting it
setup and talking to Asterisk. Is there somewhere that has SIP phone
setup
2014 Mar 13
0
Dell vostro 1550, BCM 4313 wireless, not connecting to net
Hello All,
?I have a Dell Vostro 1550 laptop. i3 core, 64 bit, 8gb ram etc etc. I had a nic interface, but some how the wired nic is not working. So I am trying to use the BCM 4313 wireless chip, of this system, to connect to the internet.
?I have Cent os 6.5 (64 bit) installed with the required libraries and kernel sources, headers etc.
I got the source code of the driver,
2006 Feb 28
1
H.323 ( HW PBX to *)
Hi,
I'm trying to connect * to Nortel BCM 50, This PBX use H.323
v3 to interface with other PBX. The port use to connect is TCP 1720 but
I can't configure this port on my * box. I'm using a H.323.conf file
sample to activate the port but the * isn't listening there. Somebody
have any idea or tip?
This is mi H.323.conf
[general]
port = 1720
bindaddr =
2014 May 24
1
Disabling QSIG Encoding in LibPRI
Hi everyone,
I was referred to this mailing list by Richard Mudgett regarding the following thread on Issue Tracker as it's a feature request and not a bug:https://issues.asterisk.org/jira/browse/PRI-170
We've got a Nortel BCM (actually 2 BCM50s and 1 BCM400)... all showing the same problem.
When a call comes in the number shows up OK but the name does not. In looking at the ISDN messages
2005 May 16
0
Configure a FreeBSD firewall to pass IPSec?
Greg White,.
I have noted your comment on some documentation found on the web, "I have
successfully (and repeatedly) used Nortel VPN client on a NATed host through a
FreeBSD gateway."
Currently i have the same problem with a Nortel BCM Running M$ Windows VPN, the
BCM sit's behind a FreeBSD Firewall / NATD.
---- Network ----
ADSL Modem
|
FreeBSD Server / Gateway / HTTP etc.
2006 Oct 31
0
6398779 Need to reduce address limits for devices downstream of a BCM 5708/5714/5715 bridge
Author: cjj
Repository: /hg/zfs-crypto/gate
Revision: a58472277959c34c37827af84da191ceba990899
Log message:
6398779 Need to reduce address limits for devices downstream of a BCM 5708/5714/5715 bridge
Files:
create: usr/src/uts/sparc/pxb_bcm/Makefile
update: usr/src/cmd/pcidr/etc/SUNW,EC_dr,ESC_dr_req,sysevent.conf
update: usr/src/pkgdefs/SUNWckr/prototype_sparc
update:
2007 Jul 05
1
Missing TRANSFER event in queue log when using Local Channels
Has anyone observed a problem where using Local channels with AddQueueMember
results in missing TRANSFER events?
Right now I'm using straight SIP channels when I call AddQueueMember(). I'm
contemplating moving to Local channels because the non-state-based
wrapuptime blows when you have a channel in multiple queues (they can hang
up and get a call immediately so long as it's from a
2006 Mar 17
0
[FOLLOWUP]: Calls not tearing down properly
As a follow-up, I have traced the PRI connection and discovered that calls
hung up by a local BCM voice station (analog, digital, whatever) send a
disconnect with a clear cause of 1 (Number not assigned) instead of a normal
clear cause of 16. Calls forwarded through the BCM disconnect with the
normal clear cause.
I have kludged up a fix to change all clear causes below 2 to 16 (I placed
2013 Apr 30
2
Asterisk QSIG doesnt send the calling name to Nortel CS1000
Hello to all,
I have a problem with an asterisk qsig.
I have three machines:
Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk--->
Asterisk
I use Snom phones on Asterisk.
If I call from Asterisk to Nortel, Nortel reminds me of the name of the person
i'm calling and I visualize on the display of Snom phone, but if I call from
Nortel to Asterisk, the QSIG does not send
2008 Apr 09
1
Connecting Asterisk to Nortel Succession 4.0 sip...
Well I am entering into a realm that I don't know.
3 sites with Asterisk
1 site with Nortel
Asterisk/Sip calls working fine between the 3 sites.
Asterisk to Nortel set calls working fine. (call comes from asterisk to
nortel and rings telephone, people answer and talk happens, hangup call
clears)
Nortel to Asterisk. Set on Nortel gets a busy signal.
Any suggestions on what to look
2007 Oct 26
1
Nortel C15K <-> Asterisk
Has anyone had any luck getting an asterisk box to talk to a Nortel
C15K softswitch? Or any Nortel "sip" products? I've been playing with
it for several days and can't seem to pass calls either direction. I
know that whike the Nortel says the C15K speaks SIP, it really speaks
nortel's implementation of SIP, but I thought I could get it to at
least pass simple calls back