similar to: destroy zombie session

Hi all, I have a question regarding pending (zombie) SIP sessions: on Asterisk CLI, with command 'sip show channels' , I see two channels in use with callID and other infos detailed; also 'sip show inuse' give me same result (in terms of channels usage): Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message xx.xx.xx.79 209

Hi guys, I recently faced an issue regarding SIP registration: I have a 2-NIC Linux PC, with eth0 set to address 192.168.1.1 (NATted over public network, with address 89.X.Y.Z) and eth1 set to address 1.1.1.1. In [sip.conf] I set general option bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) Then I have configured an account as following: [999] type=friend

I have some stuck channels that I think I'm going to have to bounce Asterisk to get rid of, but am curious to know what they are and how they've managed to accumulate. The show up with a channel identifier of '(None)' as in the output below, and do not show up in the soft hangup list, and so can't be cleared by that method. Here is the output from iax2 show channels:

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default] exten=>_.,1,Dial(IAX2/${EXTEN})

hi, i want to call PC2PC between to IAX client without authentication i want to allow every user to use PC2PC no any password required. Please let me know what i have need to do in IAX.conf or any other file to allow any user to call Pc2Pc. My IAX.conf [guest] type=user context=default callerid="Guest IAX User" My extensions.conf [default]

Hi, I developed a package that requires 5 other packages. I was wondering if anyone knows how can I automatically download and install the required packages during the installation of my new package. My idea is to make this process easier to the final user. All the required packages are under bioconductor source but I don't know where I can include the code to download and install them.

Dear Sanjay, Sorry sanjay i miss to explain completely. My PC2PC mean is Dialer2Dialer i want to allow call between Dialer with out any registry and authentication through IAX. so i need to setup Asterisk accept calls from any user and users can call to each other without any password and registration. please help how can i configure Asterisk using IAX in this regards. thanks, Asif Message: 9

I'm having a problem with intersite calls over IAX2 being abruptly terminated. Nothing odd shows in any of the logs for Asterisk or the host. The only think I can think it might be is a lag-spike on the site to site connection. How sensitive is IAX2 to lost frames, lag spikes or large variations in jitter with the GSM codec and: bandwidth=low jitterbuffer=no trunkfreq=100 ; Raised from

Hi, I'm slowly getting to grips with *. My next quest is to get IAX2/FWD calls working. I've setup a fwd account and added IAX capability to it via the website. I got the email saying it had been done with some welcome text and sample phone numbers to try, such as 10001 for the answer phone. I followed the setup example on the fwd site for configuring * to work with fwd's IAX.

I seem to be having a problem that I have narrowed down to a disagreement on codec negotiation or codec setup of some kind in an IAX peering arrangement. Here's a non-ASCII art version of the setup: DID origination provider via SIP/gsm to Call routing asterisk server via IAX/gsm to Client asterisk server via SIP/ulaw to Polycom 501 UA The problem that occurs

Through my Asterisk server, I am trying to use IAXTel to dial 800-type numbers (yes, I know I can do the same thing with FWD and others via SIP, but I wanted to play with IAX a little). It appears I'm running into some sort of a codec mismatch or something because it's not working right. The SIP client is a SPA-3000. In iax.conf, I have something like the following: [General]

hallo all, i would like to know, as i would suspect, nativ bridiging should work also, if only one iax party is behind an nat router and the other has a public ip. when i connect to iax clients, which have both pubic ip's nativ bridging is working. if one of the clients is behind an nat, the iax2 channels always get routed through the asterisk server (latest stable version from cvs) ?? i

http://bugs.freedesktop.org/show_bug.cgi?id=14174 Summary: nouveau uses symbols from private header exa_priv.h Product: xorg Version: git Platform: All OS/Version: All Status: NEW Severity: minor Priority: low Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org

I've been trying to resolve some quality issues and I was hoping someone might be able to provide some insight. To give you an idea the calls are coming in via a SIP DID and sent out via an IAX2 connection. Latency to both the SIP equipment and IAX equipment are around 80ms with 0 packet loss accoridng to ping tests. The server is located in a data centre so bandwidth is not an issue. Most

Hi all, I'm using VOIPJET to make international calls with an IAX2 connection between my local asterisk server and their server(s). At times I seem to have a problem if 5 or more international calls are made at once - I'm on a 1024kbps download and 256kbps upload DSL line (only the asterisk server uses this DSL line). Today I switched the codec from ulaw to ilbc in an attempt to lower

I'm taking inbound calls on an * server, then transferring them to a second * server where they join a MeetMe conference. If I have 'notransfer=yes' set on the first * server it works fine, but if I allow the transfer (call then shifts to be between the DID provider and the second server), the call is dropped 3-5 minutes later. There is no firewall on my end, and the two

I am having some problems getting TelIax service to work with *. Outbound calls work just fine. When I try an inbound call the phone rings and there is no audio. Upon further investigation "iax2 show channels" indicates that the codec is "unknown" The provider confirmed that they are set for ulaw and so am I. Does anyone have an idea what could be causing the codecs to

On Thu, Oct 17, 2019 at 7:44 PM Andrey Konovalov <andreyknvl at google.com> wrote: > > Currently kcov can only collect coverage for syscalls that are issued > from the current process. This patch adds support for KCOV_REMOTE_ENABLE, > that makes it possible to collect coverage for arbitrary parts of the > kernel code, provided that this part is annotated with kcov_remote_start

There is always two zombie process in my system.I don't kill them.Is there the same problem in your system. PID TTY STAT TIME COMMAND 2444 ? Z 0:00 [Xsession] <defunct> 2551 ? Z 0:00 [netstat] <defunct> -------------- next part -------------- An HTML attachment was scrubbed... URL:

At the moment xm shutdown --all --wait hangs with a zombie domain. This means it hangs xend stop on dom0 shutdown.. I see no use for this behaviour, it would be better to skip Zombie-Domain-* domains. _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel