similar to: BLF with SPA941?

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

I have an a bunch of SPA941 Linksys phones for users in and out of the office. When the phones are in the office (and on the same network as the asterisk server) the WMI goes on when it should and off when it should. But when the phone is on another network and natted it fails to do so. The light always stays off. Has anybody had a similar problem (and hopefully a resolve)?

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 =>

hi all, just wondering what's happening here: i have a pap2 and an spa941. everytime i call my spa from my pap2 i can see it being added dynamically on the regcontext: [Oct 7 11:59:08] -- Saved useragent "Linksys/SPA942-5.2.8" for peer 100100 [Oct 7 11:59:08] -- Added extension '100100' priority 1 to sipregcontext but from spa to pap2 i dont see it, i looked

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Mostly to debug/test BLF, is there a softphone or another app. which can subscribe to hints on Asterisk? Heck, it doesn't even need to be able to do calls :-) Leif

I want some cheap ip-phones with auto-answer, to work as paging system at dinnertime. Options, please. Leif

Hi. We have an odd problem with incoming SIP calls. I have attached a SIP debug log, with some asterisk verbosity as well, demonstrating the problem, below. Is this a known bug? Vital stats: - Asterisk 1.2.3 - Sipura SPA-841, SPA-941 phones - Fedora core 3 The problem manifests itself with these symptoms: - an internal SIP extension receives a call from our PRI - the SIP phone answers the

I've got a SPA942 subscribing to hints to a local asterisk 1.6; this works. But when I try to subscribe to a remote asterisk 1.4, it doesn't work; the BLF is flashing yellow. I see this in the log: "Received SIP subscribe for unknown event package: call-info" The SPA942 extended function for the key is "fnc=blf+sd+cp;sub=13 at hostname.of.remote" Is Asterisk 1.6

Hello all, I am using Linksys SPA942 in my current installation activity. I see a peculiar behavior: A call is made and the SPA942 uses its speaker. When the far end of a call hangs up , the SPA942 stays off hook, and after a time plays a fast busy. The user then has to press the line presence button to hang up the phone. I think I must be missing some sip.conf parameter. My sip.conf is pretty

Hi people, I have a few SPA-942 around, all of them work fine except one. The one behind NAT.. In every phone you can: * Pickup a Call on one of the line buttons, * Create a new call on another button * Press "xferLx" to join those to calls. This works everywhere except on the one behind NAT. After a lot of messing around with all the options possible I gave up and subscribed

Hi all, There are a lot of posts around the web about my question; unfortunately I have not been able to get any of the solutions to work. I'm using Asterisk 1.6.2.8 under CentOS 5.5. I'm trying to get call pickup working for the secretaries that monitor their bosses' phones. The BLF and the speed dial works great on the Linksys phones. Call pickup is the problem. My features.conf

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

Hello all, I'm addressing the mailing list following the suggestion of gwd on #centos-virt @freenode IRC. The subject says most of it. Here are the details : - Was running 4.4.x and configured such that /etc/xen/auto domUs would be saved/restored on dom0 shutdown/bootup. - Installation was based on "centos-release-xen" such that "yum upgrade" brough Xen to 4.6.1. After