similar to: Setting outgoing callerid on when using a PRI

Hi all, I'm having issues with overwrite caller id, when I call someone my caller id should be "mycompanyinc" but instead my id shows up as my extension number 101. this is what i have in sip.conf [101] type=friend context=sipphones call-limit=99 callerid="iuser 101" disallow=all allow=ulaw allow=alaw username=101 secret=Passwd dtmfmode=rfc2833 host=dynamic mailbox=101 at

Hi, I''ve on hostmonster.com and i''ve run into a small problem that I just can''t get. When I push my application into my hosting environment and try to run rake db:migrate, I get an error message from rake telling me to install the missing gem my environment.rb file has: config.gem "formtastic" config.gem "authlogic" So I installed them but I still

I'm having difficulty getting a PRI working between asterisk and a Merlin Legend. I have been attempting to get it going as esf, b8zs & 5ess (although I have tried other switchtypes...). I found the following info in the Legend docs: If the switch type is 5ESS, the protocol MUST be set for ATT Custom. If switch type is DMS-100, the protocol MUST be set for NTNAPRI The README in

For outgoing calls made on our PRI circuit we are setting the Caller ID using the format Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) The monitor shows that the CallerID is being set to the specified number, but yet when the call is received on the user end the ID is always the base number of our DID. For example we have 8600-8650 as DID's but the callerid is always 8600 regardless of

I have an NI2 PRI connection to a 5ESS switch. I am explicitly told to use NI2 as the protocol, not 5ESS. I am running Asterisk 1.2.4. When making calls to the PSTN, Asterisk sends the calling name as part of the display information element in the SETUP message. I need to be able to send the calling name as part of the facility information element in the SETUP message. I've seen that work

When receiving multiple calling numbers via a PRI for a call setup, I cannot find the ability to select between either first or last. Is there a way to do this currently? If not, can anyone help me in getting this to work? Here is the dump of the PRI in intensive debugging. Please note that I want the first calling number, not the last. Any help would be much appreciated. Below the PRI trace

I must be doing something stupid, but I can't figure it out. I have three PRI lines connected to Asterisk, one from the phone company, and two more connected to PBXs. Asterisk uses the incoming DID information to decide which PBX to route the call to. Should be simple. Asterisk is clearly getting the caller id info from the phone company: -- Accepting call from '512345xxxx'

hi! I have a question of ISDN PRI "calling number" setting for outgoing call. I need the receiver to see the CLI that I have set. Eventough I've set the CLI as below, the receiver keep on getting a fixed number( used with the PRI to receive incoming calls). My ISDN PRI E1 provider says he has not done any restricions on the custom CLI side.

The Asterisk Development Team is pleased to announce the release of Asterisk 1.6.0.14 and 1.6.1.5. Asterisk 1.6.0.14 and 1.6.1.5 are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ Asterisk 1.6.0.14 is the first full, non-security release since 1.6.0.10. The release candidate 1.6.0.11-rc1 was redone as 1.6.0.14-rc1 (which this release has been created

The Asterisk Development Team is pleased to announce the release of Asterisk 1.6.0.14 and 1.6.1.5. Asterisk 1.6.0.14 and 1.6.1.5 are available for immediate download at http://downloads.asterisk.org/pub/telephony/asterisk/ Asterisk 1.6.0.14 is the first full, non-security release since 1.6.0.10. The release candidate 1.6.0.11-rc1 was redone as 1.6.0.14-rc1 (which this release has been created

For Release: January 10, 2005 The CentOS Team is pleased to announce the official release of CentOS 3.4 for i386. This release includes all RHEL 3 updates (for U4) and errata up to January 5th, 2005. New ISO images are available as well as an installable DVD edition with source. In addition this release is available via BitTorrent. Downloading -- Bittorrent -------------------------

Hi, Ive been playing on a asterisk to orion gsm box E1 pri setup. I have achieved incoming calls to be passed to my asterisk box successfully but outgoing calls will just I have tried playing with various pridialplan and overlapdial settings and with no success. If anyone can make more sense from the log, I'd certainly appreciate it. I am sending a 10 digit number to be dialed. I guessed

Is it possible to rewrite caller id's? I would like to have sip phones appear by their local cid (like Henk <208>) but when they call out using the PRI I would like their full DID (MSN) to appear (like 0031201234567) I could ofcourse set callerid to the main phonenumber but surely there must be a better solution? Thanks!! Remco

Are you looking for local or Long distance? What will these T1s primarily be used for(inbound/outbound, domestic, local, long distance, international) How important are per minute rates to you? how many minutes do you expect to use per month? We are in Tampa Florida and have 15 T1s from several different providers so I may be able to refer you to one if it's a match to what you're

I'm trying to get asterisk working w/ packet8 (incoming and outgoing) and a dta310 so I can have more control over voicemail. I've looked at the data stream coming from the dta310 and from packet8, but I haven't managed to get the phone to actually place invites through asterisk. On the asterisk end with chan_oss.so, I can make it dial and I hear ringing and the first second of

I just upgraded from 1.6.0.14 to 1.6.1.6 and now my realtime static configuration for extensions.conf will not load. All other realtime configs work (SIP, IAX2, Voicemail). I cannot find any reference or documentation about the structure of the realtime static database for 1.6.1.x but I have used the same table structure since 1.4.x. CREATE TABLE `ast_config` ( `id` int(11) NOT NULL

Hi List, i've set up an Asterisk 1.6.0.3 Server equipped with an Xorcom Astribank BRI XR0013 (2 Port BRI) and Dahdi 2.1.0. In- and outgoing calls are no problem. But I can't get Asterisk/DAHDI to use the second Number of the BRI. All calls set the primary number as callerid. It wouldn't be a problem, if we would use this one as id for our company, but it's already in use (private).

Hi, I'm using a ISDN-30 E1 line from KPN Belgium. The challenge is to get a correct CallerID on outgoing lines. When I put this in my dialplan: exten => _0.,1,Set(TEMPVAR=${CALLERID(num):1}) exten => _0.,2,Set(CALLERID(num)=144622${TEMPVAR}) exten => _0.,3,NoOp(${CALLERID(num)}) exten => _0.,4,Dial(Zap/g1/${EXTEN:1},,) The resulting CallerID is accepted by the telco, but on

Hi all, i tried to write a call generator script. It generate i file like sample.call in ast src tree. But when i set the callerid and make a call over Modem[i4l] then the caller id is not set for the outgoing call. Is it impossible to set the callerid at this time for ttI devices? Thanks for help, Thomas. ******************************************* beroNet technologies GmbH Dipl.- Ing.

Is there a way for me to set my outgoing callerid string so that all callers outside of my pbx see our callerid string as company name main company number but callers inside our telephone network see extension holders name extension number? In looking at the references it looks like I can do one or the other but not both. Does anyone know how I might accomplish this? Thanks for any