denz-infotechs
2004-Jul-14 04:46 UTC
[Asterisk-Users] ISDN PRI "calling number" for outgoing calls
hi! I have a question of ISDN PRI "calling number" setting for outgoing call. I need the receiver to see the CLI that I have set. Eventough I've set the CLI as below, the receiver keep on getting a fixed number( used with the PRI to receive incoming calls). My ISDN PRI E1 provider says he has not done any restricions on the custom CLI side. ---------------------------------------------------------------------------- ------- /var/spool/asterisk/outgoing/1.call Channel: zap/g1/722442946 Callerid: Test <722424327> MaxRetries: 1 RetryTime: 60 WaitTime: 30 Context: meet Extension: 722442946 SetVar: CALLERIDNUM=722444444 SetVar: SECONDPARTY=722424327 SetVar: FIRSTPARTY=722442946 Priority: 1 ---------------------------------------------------------------------------- ----------------------- The CLI that I need the receiver to see is the = Callerid: Test <722424327> I've attached the debug messages of ISDN Q.931 (PRI debug span 1). What could we make out of these debug messages. Is it been properly set and passed to the ISDN system by *, judging by the above messages ???? Or the ISDN admin is new to the job :) ?????? --------------------------------------------CALL DEBUG----------------------------------------- -- Attempting call on zap/g1/722442946 for 722442946@meet:1 (Retry 1) -- Making new call for cr 32774> Protocol Discriminator: Q.931 (8) len=45 > Call Ref: len= 2 (reference 6/0x6) (Originator) > Message type: SETUP (5) > Bearer Capability (len= 3) [ Ext: 1 Q.931 Std: 0 Info transfercapability: Speech (0)> Ext: 1 Trans mode/rate: 64kbps, circuit-mode(16)> Ext: 1 User information layer 1: A-Law (35) > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, ExclusiveDchan: 0> ChanSel: Reserved > Ext: 1 Coding: 0 Number Specified Channel Type:3> Ext: 1 Channel: 1 ] > Display (len= 5) [ > Display (len= 5) [ 1> Display (len= 5) [ 1T> Display(len= 5) [ 1Te> Display (len= 5) [ 1Tes> Display (len= 5) [ 1Test> Display (len= 5) [ 1Test ]> Calling Number (len=10) [ Ext: 0 TON: Unknown Number Type (0) NPI:Unknown Number Plan (0)> Presentation: Presentation permitted, usernumber passed network screening (1) '722424327' ]> Called Number (len=12) [ Ext: 1 TON: Unknown Number Type (0) NPI:Unknown Number Plan (0) '722442946' ]> Sending Complete (len= 0)< Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= 2 (reference 32774/0x8006) (Terminator) < Message type: CALL PROCEEDING (2) < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 ] -- Processing IE 24 (Channel Identification) < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 32774/0x8006) (Terminator) < Message type: ALERTING (1) < Protocol Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 (reference 32774/0x8006) (Terminator) < Message type: DISCONNECT (69) < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the remote user (4) < Ext: 1 Cause: User busy (17), class = Normal Event (1) ] < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Public network serving the local user (2) < Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] Can someone suggest ? bit123.