similar to: Help with concurrent VoIP calls

Is there any asterisk guru who can explain me how how asterisk knows which context forward the call to? -- Joseph

For anyone looking for a cheap home ZFS server... Dell is having a sale on their PowerEdge SC440 for $199 (regular $598) through 11/12/2008. http://www.dell.com/content/products/productdetails.aspx/pedge_sc440?c=us&cs=04&l=en&s=bsd Its got Dual Core Intel? Pentium?E2180, 2.0GHz, 1MB Cache, 800MHz FSB and you can upgrade the memory (ECC too) to 2gb for 19$ bucks. @$199, I just

Hello Community, I''m very new to Xen Virtualization and hope one of you can advice and guide me. We are planning to virtualize existing 4 old server that we used in a project. The server is 4 years old but I do believe very good HW that we can reuse and take advantage of virtualization. In a nutshell the hardware spec looks like this; 2 Server with Intel® Xeon® Processor 5160 (4M

Hello everyone, I just wanted to see if anyone has experience running Xen on: Dell 2950 III 2 x Quad 2.0 Ghz 1333Mhz FSB 32 GB DDR2 (8x4GB) 2 Disk Perc RAID 1 (7200 RPM SAS) Broadcom Dual Gigabit Ethernet LOM & TOE The requirements of each VM are not that high (and are all identical). I just want to run remote desktop and 1 other application at any given time (either a web based IE

Alrighty. I'm having a hell of a time and I need help. I'll try to give as much information as possible. ---------- HARDWARE ---------- MB: Supermicro PDSBM-LN2+ Intel 946GZ ICH7R + Intel? 82573 Memory: Crucial 512Mb, 1Gb, 2Gb modules matched to above MB. Processors: Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit Intel Pentium E2140

Okay, so I've done the requisite searching around, and I'm either missing something unbelievably simple, or something funny is going on here. I'm attempting to run a couple of simple games under Wine 0.9.57 in Gutsy on my new System76 laptop. When I attempt to run either of them, the loading graphic comes up, but the moment they attempt to change to fullscreen, X crashes. No warnings,

I have this server I need to put to work. The option I have is to make it work as a small office PBX with SIP users and a Digium E1 Card for PSTN service. 24 SIP users and one E1 card in an Intel 945board (533 Front side bus) with 1GB DDR 533mhz of ram, one Pentium Dual Core 2.66 ghz (FSB 533MHZ) and two 80GB SATA disks. Can the box sustain the load? I can add another 1gb of ram if necessary.

Is there anyone who has successfully put together a "high-powered" mini-itx ZFS box that would be willing to post their system specs? I''m eyeballing the KI690-AM2... http://www.albatron.com.tw/english/product/mb/pro_detail.asp?rlink=Overview&no=239 ...but am having a difficult time locating it and a suitable case currently. I was in negotiations with a hardware source,

Can anyone comment on using SMS in conjunction with VoIP service using one of these three VoIP providers: voip.ms, vitelity.com, flowroute.com? Are some SMS services more compatible with Asterisk (i.e. SMS over SIP works perfectly or not)? Is it best to use a different data channel for SMS messages (i.e. SMS via HTTP, SMS via XMPP) instead of Asterisk's built in SMS application

1. Does variable FSB block sizing extend to files larger than record size, concerning the last FSB allocated? In other words, for files larger than 128KB, that utilize more than one full recordsize FSB, will the LAST FSB allocated be ''right-sized'' to fit the remaining data, or will ZFS allocate a full recordsize FSB for the last ''chunk'' of the file? (This is

I saw in another post that a best practices doc will be coming, but I figured I would try to get this working. I''m trying to understand why zfs uses so many "zfs create" so I can use it better. What makes sense is that each zfs fs can have it''s own options (compression, nfs, atime, quota, etc). I really love this because it is so tuneable -- compression on these

Local APIC timer may stop at deep C state (C3/C4...) entry/exit. this patch add the logic that use platform timer (HPET) to reenable local APIC timer at C state entry/exit. Signed-off-by: Wei Gang <gang.wei@intel.com> Signed-off-by: Yu Ke <ke.yu@intel.com> _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

Have anyone experienced mixed meetme conferences? Im running a 12 seat call center outbound only. Asterisk 1.2.8, SIP/ulaw at the phones, SIP/ulaw to the SIP terminator. Machine: pentium Dual core 2.0ghz (533 fsb) , 1 GB RAM (533mhz ddr) , 2 SATA 80GB DISK in RAID 0 via software RAID driver. Two Intel PRO 10/100 NIC, IRQs are separated, an X100P so not to use ztdummy. Motherboard is an Intel

Hello, Please. Can the following spec give me some headache with CentOS 4.4? Where to find out? I have read former advice on the list about not to mess with Intel PCI extra cards. Thank you in advance CPU P4 3,06 (524) S.775 FSB533 INTEL D101GGCL 775 ATI DDR SV R 1 PCIE 16X D.CORE Mem KINGSTON DDR2 1GB 533 HD SATA 80GB SEAGATE ST380211AS /or/ HD SATA 120GB SEAGATE ST3120026AS --

(a) Mark (mhr) suggested I buy a bare bones box, when I reported the problem with the mainboard in this Dell Dimension 2400 box. Possibly I can have the mainboard repaired (and the PSU, if it is also having problems), and if so, I will give this one to my Stepson and go the bare bones box route and have a more powerful box for myself. I looked at two (2) very low end Desktop mainboards in the

I'm doing some automated calling by putting .call files in the Outgoing folder of Asterisk. I'm concerned this might be a stupid question, but I'm pretty sure I've done my research well and I'm unable to come up with an answer on my own. I want to know: what happens to the .call files after the "MaxRetries" number has been reached? In my experience, they stay in the

Vitelity seems to be offline to both IP and voice traffic. Is there any place to find out what their status is? Roger Marquis

Just spended ~ hour googling - all boards are based on GC-XX or I750X Chipsets - all for Xeons. There also some boards for Pentium 3. Can someone point me to a board with 64Bit 3.3v PCI for ordinary P4 with 800Mhz FSB. Thanks

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

I'm looking at deploying a new set of servers based around Intel P4 800MHZ FSB processors. Currently I'm looking at the following 2 motherboards and I'm wondering how well supported they are under -STABLE (specificaly the ATA and LAN as well as text mode video) Model Chipset ASUS P4P8X Intel 865P ASUS P4P800 Intel 865PE Also I'm looking for recommendations on Dual Xeon