similar to: chan_echolink

Hello to the list, I have a question about Asterisk/app_rpt: When a signal is *not* being received and or transmitted by the radio system attached to Asterisk/app_rpt via its interface, is the incoming and or outgoing data suppressed (silence suppression)? In other words! At idle but still connected to some other device, what data will be transferred? I currently don't have access to a

Dear All, I am not sure if this is the right place to ask my question but I can't find a newsgroup or support for this app_RPT concept so I hope if some one in this community who have tried it out could help me out. I studied this application requirments and saw the hardware needed they describe a radio quad which uses RJ 45 but I can't see where the RJ goes in order to be able to

Good morning, There is a new patch up on reviewboard[1] right now for the removal of app_rpt and chan_usbradio from Asterisk trunk. As it stands right now these two modules do not appear to be maintained in this repository and have out-of-date code. Russellb's patch will see these to modules removed from asterisk trunk (asterisk 11). If a large part of the community wishes to help

I have a collection of .csv files in a directory, and want to read them into R data.frames whose names are the same as the file names, without the .csv extension e.g., from > (files <- list.files(pattern="*.csv")) [1] "Allstar.csv" "AllstarFull.csv" [3] "Appearances.csv" "AwardsManagers.csv" [5]

Hi guys, one of the questions where you need a real human instead of a search engine, so it would be great if you could help. I have a matrix of z-scores which I would like to filter, sometimes columnwise, sometimes rowwise. Data looks like this: Allstar hsa.let.7a hsa.let.7a.1 hsa.let.7a.2 2 0.87 0.79 -0.57 1.07 3 0.67 -1.14 -0.78 -0.95 4

Hy, I have a network with WIFI communication and VHF/ HF channels. I have integrated asterisk in the network using SIP, ZAP and IAX2 channels for WIFI communications, but I don't Know How I could integrate the VHF/ HF channels. I have heard speaking about app_rpt project, but I don't Know very much about this. Could I integrate VHF/ HF channels with this application? if the answer is

Pete VK2YX writes > I've been involved with IRLP for about 5 years and am one of the original > install team. I've gone through the emmotions of allowing "other" networks > connect to IRLP and I know its caused some lots of headache. > > As far as a closed network goes, yes there is LOTS of passion to keep it HAM > only and I'd have to support that notion.

I'm tring to compile fax applications on Debian system. the spandsp library compiles ok, and when i try to patch the make file in apps directory as is said in the instructions it returns errors. I'm using cvs version of asterisk . -------------------------- voipgw:/usr/src/asterisk/apps# patch < Makefile.patch patching file Makefile Hunk #1 FAILED at 35. Hunk #2 FAILED at 68. 2 out of

I have two problems. The first is that when I dial my number from a phone on the Internet or any phone outside my LAN, Asterisk does not respond in any way, which means somehow my system is not picking up the fact that there's an incoming call to it. The second problem is that I thought I'd try an internal phone to see if I could get the hello-world stuff working at the least. I

Hi all, This my first mail in the community. My name is Manolo. I'm new in Asterisk. My objective is to control some radio using Asterisk via web. In google I could see that the application app_rpt had this goal, but currently is not in the new Asterisk 1.8 or higher. Thinking in future, I thought the easer way to do that is to buy some RoIP unit and do the communication with

Any one know of software that allows 2-way radios as VoIP(SIP) clients, besides dingotel's usb & mic cable trick ? http://www.dingotel.com/2way/requirements2way.asp They might be ok if the SIP client was not hardcode to their own SIP proxy Has anyone tried any hacks to get the 2-way radio SIP client to regsiter to a * box. hmm chan_frsgmfrs anyone? using the usb/mic cable under linux :)

I've installed spandsp-0.0.1k on a RHv9 box with CVS-HEAD-09/19/04 and compiled the libraries just fine. Having a problem with patching the asterisk/apps Makefile however. The patch attempt results in: [root@phoenix apps]# patch <Makefile.patch patching file Makefile Hunk #1 FAILED at 35. Hunk #2 FAILED at 68. 2 out of 2 hunks FAILED -- saving rejects to file Makefile.rej [root@phoenix

I have just upgraded from courier to dovecot and things seem to be working okay (after a few problems getting shared folders working correctly). I notice the following error message in my logs:- Jun 23 11:17:32 calzone dovecot: child 1258 (auth) killed with signal 11 I am using the beta9 ebuild that is available from gentoo portage. I have followed the steps to try to get a core dump but it

I have a server with 8 Xorcom Astribank, they're connected to the server via a USB hub, my problem is: when a reboot the server the ID of the Channel Bank changes, cousing a big mess on my server. Anybody know how can I solve this ? Best regards, -- Guilherme Loch G?es Visite nossa loja virtual: http://www.shopvoip.com.br Not?cias e F?rum sobre VoIP com software livre:

This is just curiosity, but I'm wondering why the Morsecode app has remained part of the trunk for all of these years. Is there any practical use for this or is it just an homage to the ghosts of telecommunications past? Does anybody use the Morsecode app for anything interesting? I'm strangely fascinated by this core piece of Asterisk functionality. -Chris

"app_rpt is an application which comes bundled with Asterisk, however, a later version may be available on our source repository. All you need to do is go to asterisk.org, download asterisk, configure the asterisk to build app_rpt by modifying the Makefile in the asterisk/apps directory, and then compile and install it. You can get the latest version of app_rpt.c along with the sound files,

Thanks a lot Tony and Dhaval for your much appreciable suggestions. Regards, Rajib Rajib Deka SIEMENS Ltd. Robert V Chandran Tower, First Floor, West Wing, #149, Velechery Tambaram Main Road, Pallikaranai, Chennai-100, INDIA. www.siemens.com Mob: +91-9176780669 | E-Mail: rajib.deka at siemens.com Date: Wed, 20 Apr 2011 13:55:25 +0530 From: DHAVAL INDRODIYA <dhaval.it01034 at gmail.com>

I download app_valetparking.c from http://www.loligo.com/asterisk/misc/apps/app_valetparking.c and followed the directions on http://www.loligo.com/asterisk/misc/apps/app_valetparking.README I am using asterisk-1.0.0 any suggestions [root@localhost asterisk]# astxs -install apps/app_valetparking.c gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarat ions -g -Iinclude

Hi there, I was looking for a GSM gateway, but I didn't find any prices... Anybody knows how much one of these costs? And, is it possible to use an amateur radio with asterisk? Thanks, Marconi.

So I have done through chan_console.c and searched for console_pct_lock() - every one - has a matching console_pvt_unlock() How is the deadlock occurring ? jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20230908/dee530c8/attachment.html>