similar to: Strange IAX2 / Iaxmodem problem

Hi, Does anybody have an idea as to why dahdi_test results drop to unacceptable levels after doing a wanrouter stop/start using a Sangoma card? See below that it drops from 99.99% to 98.55%: [root at bin]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.999512% 99.992874% --- Results after 2 passes --- Best: 100.000 -- Worst: 99.993 -- Average: 99.996193, Difference:

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create

Hi, I'm using Sangoma's wanpipe together with dahdi, all software downloaded today at most recent version. Hardware is Sangoma A104, a 4xE1 card. Installation went well. Anyway, wanrouter status shows a different result than dahdi_tool or dahdi_scan. I've just put a hardware loop on port 1. All the other ports are open. wanrouter status shows the expected result: Device name |

Hi all, I've done this a few times with other PBX's but swyx has stumped me! I'm having some trouble getting Asterisk connected to a Swyx system using a sangoma A104dx... currently the setup is: BT <-> Swyx The above setup works fine... what i'm trying to achieve is BT & SIP Trunks <-> Asterisk <-> Swyx I have connected to our BT (2 x ISDN30 UK) with

Dear * users, in your opinion, when using a * as a public server, is good practice enabling nat=yes in sip.conf for all the peers? Can anyone imagine a scenario when enabling this parameter (even for peers that don't require it) can cause problems? Regards and thanks in advance, Alex -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi List, Is there any way by which we can remove asterisk from machine without deleting folder manually? I did google and gets various solution by no success. even after deleted asterisk will be there ..... ----- Thanks and regards Virendra Bhati +91-9172341457 Asterisk Engineer -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm running asterisk 1.2.1 and started to play with iaxmodem 0.0.7 running on the same box. I wonder how to setup the iax account correctly so that I may initiate outbound calls via iaxmodem? registration upon iaxmodem startup is okay and I can direct calls to it. -- Registered IAX2 'iaxmodem' (AUTHENTICATED) at 127.0.0.1:33874 But upon an outbound call setup request from

good tips ill try that out thanks ps is there a recommended runlevel or 2345 is ok? -----Original Message----- From: Lee Howard [mailto:faxguy@howardsilvan.com] Sent: Monday, January 09, 2006 1:59 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] OT: IAXModem in inittab causes modem to be unres ponsive, running from console it's OK Colin Anderson

Can anybody point me in the right direction please? I'm having some issues getting iaxmodem and hylafax to talk to each other. I have no doubt that someone has had this type of issue before but I can't find anything useful in the archives or on Google. Under RH9, with chan_capi 7.1, Asterisk 1.2.24, with an AVI Fritz ISDN2e BRI card all working perfectly... I've downloaded and

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is to send all my call to the pstn on A104D? The pstn am

I am trying to build an rpm package for iaxmodem-1.2.0. At the moment I am still trying to get a working spec file put together. I have managed to get an SRPM produced but the binary build from this fails due to there being no install task in the Makefile.in provided with the source. I have found a spec file from opensuse that provides this in the install portion: %build [

I'm running into a strange issue with Asterisk + Iaxmodem + hylafax on the same machine. After rebooting the iaxmodems don't register to asterisk. Stoping and starting the relevant services gets it working, but what is the point of using init scripts if it does not work right? I already tried to adjust the init scripts in /etc/rc3.d so I have: S50asterisk s90iaxmodem S95hylafax So it

I am testing out hylafax and iaxmodem. Submitting jobs to the hylafax server and having it then dial using iaxmodem is working fine. Hylafax server is talking to my Asterisk box that has a Sangoma A101 in it via iaxmodem via an IAX channel using ulaw. A call coming into a certain test DID comes into the Sangoma A101 then it goes to another box via IAX ulaw that uses the rxfax app to

Hi, I'm trying to use iaxmodem against a very old version of asterisk (1.0.7 - its a debian sarge embedded system), yet when asterisk gets a call from iaxmodem, it says that the "format for the call is unknown". Does anyone know if there is a minimum version of asterisk that is compatible with iaxmodem 1.1.0? Thanks. -- James

faxguy, maybe you can tell me why As I've noted in previous posts I'm evaluating HylaFax with IAXModem. When I run iaxmodem and faxgetty through a console the modem works 100% I have yet to find a fax that it won't tie up with. When I run IAXmodem and faxgetty in initttab, the modem is extremely slow to respond and only actually does anything about half the time, the rest of the time

I'm succesfully using IAXmodem for faxing (using hylafax) with Asterisk. I would like a little more control for outbound calls using IAXmodem, but I'm not sure how to do it. It looks like dialing out over IAXmodem bypasses the dialplan altogether...can anyone confirm this? MD

Hi, I'm sending twice the same file using Hylafax's sendfax app. The first time I'm "dialing" a DID attached to the ReceiveFAX application. The second time I'm dialing an internal extension attached to the same ReceiveFAX application : 1. sendfax/hylafax/iaxmodem ----> asterisk ----> dadhi ----> dahdi ----> asterisk ----> spandsp 2.

A few weeks ago, I lost my Trixbox that was all set up with Hylafax and IAXmodem. I am trying to set it up for email > procmail > faxmail > iaxmodem > asterisk >sipext > ATA (with attached fax). I have followed all the instructions on creating the IAX extension and configuring the IAXmodem config file. I can see the connection in Asterisk: iax2 show peers Name/Username

I have all three running on the same box. I say OT because it appears asterisk is doing it's job just fine. It must be an IAXmodem or faxgetty (hylafax) problem When faxes work, they look great. I have ten IAXmodems setup with different ports and they register fine. I have ten faxgettys that startup fine. I start the IAXmodems and then faxgettys in inittab. They are setup as a roll

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so