similar to: RAMDisk vs Extarnal server for recording

Hi everybody, i need someone to tell me the spins numbers of Rx+,Rx-,Tx+ and Tx- of TE110P and also if you can tell me have to made a cable like that?? Modem Teleco <-----------Self Crosscable------------>Asterisk Rx+ <--------------------------------------------------------------> Tx+ Rx- <--------------------------------------------------------------> Tx- Tx+

Hi all Is it possible to do https request via AJAX from a http loaded page ? It''s for minimizing serverload and just send passwords and user-account stuff via https. >From my understanding how AJAX works, it is not possible to mix, because http/https is like cross-domain In case I am not wrong, maybe someone knows a way around the limitiations (my first thought: proxing via

Copying a file (650Mb) from a W2K pc to Samba doesn't work well. I have a transfer time of 25 minutes while the 2 machine are connected with a crosscable to each other (10Mb ethernet). A ftp between both systems went well. What's the problem...... -- Regards, Roger -- Running Redhat 7

Hi, I have this setup: (PSTN E1 PRI) -- Asterisk -- (crosscable) -- Alcatel PBX --- analog phones and a few of VoIP phones directly connected to Asterisk. Calling a number (only one until now!) - an automatic responder (IVR) - from VoIP phones works, from analog phones doesn't work: NOANSWER after a few seconds. I'm using no 'r' in dial options (this caused a problem with an IVR

Hello, I'm having a little problem after logging into domain via samba, after a few minutes the squid no longer authenticates the users through single sign on and keeps asking for authentication in the browser without stopping. below is my settings and error logs. smb.conf [global]workgroup = SALEnetbios name = utmadmserver string = PROXY SERVERload printers = nolog file =

I have this setup: (PSTN E1 PRI) -- Asterisk -- (crosscable) -- Alcatel PBX --- analog phones and a few of VoIP phones directly connected to Asterisk. Calling a number (just one!) - an automatic responder (IVR) - from VoIP phones works, from analog phones doesn't work: NOANSWER after a few seconds. I'm using no 'r' in dial options (this caused a problem with an IVR some time

I know this has come up quite a few times. Its that same r6034 error except I have vcrun2005 and when I try to install vcrun2008 with winetricks I get....The same error! So I can't upgrade because of the error and a loooot of my programs wont work because of it now. Is there a previous version I need first and have to install them in order?

Dear community, I have a 2-node gluster cluster with one replicated volume shared to a client via NFS. If the replication link (Ethernet crossover cable) between the Gluster nodes breaks, I discovered that my whole storage is not available anymore. I am using Pacemaker/corosync with two virtual IPs (service IPs exposed to the clients), so each node has its corresponding virtual IP, and

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hello! Hardver: Windows XP Compaq Proliant DL360, Linux Compaq Proliant DL380. 2 pieces of processors Intel Xeon 3,2GHz, 2GB RAM, 6 gigabit interface (2 tg3, 4 e1000), Debian Woody, 2.4.31 vanilla kernel. 6 U320 SCSI 15krpm HDD, 2 HDD RAID1 system, 4 HDD RAID1+0 data. Every network cards connect at speed of 1000MB full duplex, with XP crosscable (but we've tried with gigabit switch, too, we

Hello, I have some questions regarding the proper tinc configuration to allow IP-broadcasting, IPX etc. aka the complete gaming setup. I searched the net and did not find a working (or well enough documented) solution for my needs. Let me describe what I want and what I tried so far and what worked or failed. I want to use the following setup with three machines (all with the same tinc

(and FWIW, I'm currently trying to finish the patch that makes this a reality... mostly hard because it has to unwind a loooot of complexity we've built up due to not having this) On Sat, Nov 3, 2018 at 5:47 PM Jeremy Lakeman via llvm-dev < llvm-dev at lists.llvm.org> wrote: > http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html > > TLDR; CallInst & InvokeInst

I''ve worked as a freelance Rails developer for the past 6 months. Switching from a cushy salary to hourly work forced me to reevaluate my finances. Developing a budget came easily to me, but tracking my spending was annoying. I also needed a way to record my work across a number of jobs. The convergence of these needs lead to ActiveBudget. ActiveBudget is the software I use every day to

Eric, I''ve attached the output from the command you requested below. I''m using kernel 2.6.17.12 and tc version ss060323. I''m have a nforce4 onboard giggabit controller using the forcedeth driver, if that makes a difference. Charlie, I''ll take a look at the Apache model for throttling, thanks. I was going for tc because was going to try to add additional

Hello, The company that I work for will be developing a large webbased survey (for a government institution) somewhere in Q1/Q2 of 2006. I''m investigating the technological possibilities and Rails is certainly a candidate. The survey application will have to perform under very high peak load, and the exact specifications of the hardware are not known at this point. I''m assuming

Hi All, I am using Centos4.0 and running Squid Reverse Proxy for image caching , i have configured RAMDISK of 265 MB for one cache folder in preproduction environment for testing now i have upgraded RAM upto 8GB, but when i change ramdisk_size parameter in grub.conf and rebooted the server when i tried to format and mount it doesn't work. Can anyone please help me how to increase RAMDISK

Hi, are there any plannings to integrate a kind of ramdisk funktionality into ext3? I imagine a dynamic ramdisk into which only modified files of a read-only mounted ext3 are copied in order to have read-write access without really writing (because the filesystem is on a compact flash disk, for example). Regards, Daniel -- <> d.vollbrecht@scram.de -> <http://www.scram.de>

I know this is not a question for syslinux itself, but a question for syslinux usage on Linux. I use pxelinux to boot Linux. I know I can use "root=/dev/nfs nfsroot=ip:/dir" to mount the NFS as root file system. But it needs me to prepare several different directories for different clients and each directory should include a initrd.gz copy (e.g., cp/mv/mkdir utilities, etc). My

Hi, I''m trying to boot XEN via network, so I''m trying to create a rootfilesystem over a RAM disk for XEN. Has anyone done that before? Thanks, Gianluca _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I have been messing with QCOW on Xen and I''ve come to the conclusion that nobody actually uses it otherwise it would work. Has anyone gotten QCOW2 and Xen to work reliably? I have 40 PV VMs that are identical (initially) and would like to move from separate disk images to one base image sitting in a ramdisk and the COW images hosted on an iSCSI storage device. The VMs would boot off the