similar to: Nehalem & Digium Wildcard issues?

I've seen this consistently on three systems, with three different cards, and multiple versions of DAHDI. At first I thought the issue only occurred on newer, Nehalem-based, systems, but I reproduced it on a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the

Hi, HP says that what they call "NUMA split mode" should be disabled in the BIOS of the Z800 workstation when running Linux. They are reasoning that Linux kernels do not support this feature and even might not boot if it?s enabled. Since it apparently was years ago since they made this statement, I?m wondering if I should still leave this feature disabled or not. More recent kernels

Hallo list, i am testing a Dell M610 with two quadcore Intel Nehalem CPUs at the moment, so with Hyper-Threading 16 cores in total. As mentioned in the subject I am using Ubuntu 8.04 64Bit and Xen 3.2 from Ubuntu package. During these tests I hit on some issues, which are not clear to me. I would be thankful for any comments/hints/thoughts on the following topics: 1. I recognized that

Roberto estoy en uruguay en estoos momentos. Recien lllego el miercoles El mar 31, 2013 1:59 p.m., <asterisk-users-request at lists.digium.com> escribi?: > Send asterisk-users mailing list submissions to > asterisk-users at lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users

John R Pierce <pierce at hogranch.com> writes: > On 10/1/2017 8:38 AM, hw wrote: >> HP says that what they call "NUMA split mode" should be disabled in the >> BIOS of the Z800 workstation when running Linux. They are reasoning >> that Linux kernels do not support this feature and even might not boot >> if it?s enabled. > > hmm, that workstation is

I''ve got a new system with Dual Quad Core Intel E5520 processors and Intel 82576 NICs built on the motherboard (this is a Supermicro Nehalem based blade). I''m running Xen 3.4.2, but I''ve also tried 3.4.1 and had the same problem. Dom0''s network works flawlessly, but the DomU systems all have network issues. Whenever they transmit large packets, it is as if

On 10/1/2017 8:38 AM, hw wrote: > HP says that what they call "NUMA split mode" should be disabled in the > BIOS of the Z800 workstation when running Linux. They are reasoning > that Linux kernels do not support this feature and even might not boot > if it?s enabled. hmm, that workstation is a dual Xeon 56xx (Westmere-EP, derived from Nehalem), new in 2010 > Since it

On 29 February 2012 09:35, Chandler Carruth <chandlerc at google.com> wrote: > I still think we can do more, but it's already much faster than the existing LLVM one except for the issue Tobias pointed out w/ modulo-4 key sizes. I'm going to investigate this OK, but this is a VERY big exception! Almost any non-string data anyone wants to hash will be a multiple of 4 bytes in

On 2015-10-23 5:42, Charles Lepple wrote: > So the interesting part is that I was testing the master branch yesterday (same commit) on an older Debian box (3.16 kernel). The driver had trouble starting, but once it got going, it has been running continuously. > > I'm not really sold on this approach (due to the testing needed on other hardware), but this pull request reworks the USB

Hello, i´ve got a new Intel Nehalem server with an i7-920 CPU. I installed a Debian Lenny OS ... Now, i cannot find any images for hypervisor or kernel that seem to be runable on that hardware. :-O All of that is AMD: apt-cache search hypervisor linux-image-2.6-xen-amd64 - Linux 2.6 image on AMD64, oldstyle Xen support linux-image-xen-amd64 - Linux image on AMD64, oldstyle Xen support

Hi list! I tried to install Xen 4 in a HP Proliant ML350 G4p, but it seems not compatible, is there another way to run Xen 4 in this server ? I couldn''t find any information on Hp''s site neither Intel''s site ... Thanks ! -- @ntonio _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

> Hi All, > > My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? > > Thanks > Latest updates (including firmware) for the HP ML350 Gen9 were released on 2014DEC19 (v1.21); I would suggest double-checking

Hello everyone. I am looking for a E1 PRI card which supports network side signaling not CPE. The main idea is to connect an plain old E1 compliant PBX which doesn't have an VoIP module to the newly created VoIP infrastructure. Could we use a Digium TE122P or something other to resolve this situation? Thanks in advance. Dimitar -------------- next part -------------- An HTML attachment was

We bought a Compaq ML350 G5. When trying to install Centos, I got the message: No disk installed. and centos suggest me a list of drivers, but none of them seems to work. Has anybody tried this? Any help would be appreciated. carlos -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

hi guys, after installing centos on my ml350 i found 2 choices on the grub options. CENTOS-4 i386 (2.6.9-22.ELsmp) CENTOS-4 i386-up (2.6.9-22.EL) what choice will i choose ? --------------------------------- Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new and used cars. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is, if

Package: xen-hypervisor-3.4-amd64 Version: 3.4.2-2 Severity: critical Justification: breaks the whole system -- Dump: (XEN) Xen version 3.4 (Debian 3.4.2-29 (XEN) Command line: com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all noreboot (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 1 seconds (XEN) EDID info not

Package: xen-hypervisor-3.4-amd64 Version: 3.4.2-2 Severity: critical Justification: breaks the whole system -- Dump: (XEN) Xen version 3.4 (Debian 3.4.2-29 (XEN) Command line: com1=115200,8n1 console=com1,vga loglvl=all guest_loglvl=all noreboot (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16

I am connected with 5ess to a nortel switch. Running dahdi 2.1.04 and libpri 1.4.7 and asterisk 1.4.22 Everything is working for a short time. The other side reports back to me that he is getting slip-r errors from the TE122P card. After to many errors (like 11) the d channel shuts down on their side. Any idea what to do about this? I have not ran into it before. Jerry