similar to: How to call extensions and add them to a conference room

[This email is either empty or too large to be displayed at this time]

Hi, Is it possible to create a clear zaptel channel which doesn't require to be picked up? The requirement of my client is to open a clear channel to a recorder which starts recording certain message. Currently the channel which is created by zaptel requires the other end to answer the call, and the recorded can't answer, so the channel get hung up after a certain number of rings. Zaptel

Hi list, I am planning a migration to virtual machines, and was considering with it to move from 1.4 to one of the later versions. My and my clients' 1.4 setups have been rock solid and I don't want to put myself into any unnecessary trouble. Those of you with solid experience with all these versions, what would you suggest? What new and exciting enhancements would newer versions bring

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm

Only 100? We had a single server over 300. From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Saturday, October 30, 2010 9:49 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Under heavy attack My count has reached 100 for the day. The server serves doesn't serve

Hi all, For a top quality setup, I will need to install high quality VoIP switches with QoS and PoE. My potential customer should not have any problem with call quality. Experienced folks, Please advice me what switches to install and at what price. I may need it for upto 100 phones. What else should I consider so that phones work without problem along with the computers on the same network?

Hi everybody, How can we add new contexts in asterisk realtime module? All I could figure out after googling is that a new context HAS to be declared in extensions.conf with 'switch => Realtime/@<databasetable>' under the context name declaration. This works fine as long as we are adding extensions only to this one context, but doesn't give the freedom to add new contexts for

For a while now I've been looking for a good web based soft phone solution, but so far no luck. A few solutions which I've tried, both Java based and Flash based, either don't work, or had bad sound quality. I need something which I could put on my productions server for my clients. Seems like good web based solutions are all paid ones, nobody is giving it for free. Any ideas,

Hello list, I have been using Cepstral's 8KHz voices for my text-to-speech service for some time now, and have been noticing that the voice quality is really poor, doesn't matter what phrase I give it to convert. None of the other 8KHz voices I have ever used were this bad. It doesn't seem good enough system to be used in a commercial system. Is there any better quality text-to-voice

My main asterisk server is under unusual heavy attack, and so far Fail2Ban has blocked about 30 IPs, from various different countries. At this time it is blocking about 1 IP address every few minutes. Just wondering if anybody else is also experiencing unusually increased hack attempts today? Zeeshan A Zakaria -- www.ilovetovoip.com www.pbxforall.com (beta) -------------- next part

For a new project, I have written a dialplan and it is pretty straight forward: The [dialout] context dials out a number, and h extension in this context writes the CDR. But what is happening is that if the callee hangs up first, all values in the CDR are fine, but if the caller hangs up first, the 'dst' column is always 'h'. I put a NoOp right in the begining of this macro to

Anybody knows why ARI gives this error message when I enter extension number and password. *Warning*: file(/var/spool/asterisk/voicemail/default/222/INBOX/msg0000.txt): failed to open stream: Permission denied in * /var/www/html/recordings/modules/voicemail.module* on line *525* It doesn't show the voicemails, although it shows that there is 1 or 2 voicemails in the INBOX. -- Zeeshan A

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hello, I noticed that changes to realtime sip peers are not applied until a 'reload'. A 'sip reload' does not make any changes to realtime sip peers. When changing for instance the mailbox-parameter in the realtime sip_buddies table, the change is not applied with a 'sip reload'. For every change there is a complete 'reload' necessary. Why does a 'sip

Thanks Zeeshan, SAngoma told me that the asterisk problem is unrelated to wanpipe drivers, they told me to reinstall asterisk again But, i still having doubts about the problem :( Thanks in advance > > Message: 10 > Date: Thu, 18 Mar 2010 00:21:06 -0400 > From: Zeeshan Zakaria <zishanov at gmail.com> > Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE >

I've got a 778 DID for vancouver, but don't know if it will be a local call if dialed 604 and vice versa. What are the different area codes in Vancouver and why its easier to get 778 DID than 604? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi List, When doing 'ael reload' on two servers, which are setup with asterisk 1.4.22 and 1.4.35 respectively, I am getting multiple lines of this strange error: ERROR[15483]: ael.flex:647 ael_yylex: Unhandled char(s): On three other servers with same versions of asterisk, i.e. 1.4.22, I don't see this error. Number of lines of the error are the same as the number of lines of the

Hi everyone, I googled this followed the instructions, but it hasn't work for me yet. I have universal setting in SIPDefault.cnf and phone specific settings in SIPXXXXXXXXXX.cnf. But it doesn't get registered. I need to register it on two different asterisk boxes. So my SIPXXXXXXXXXX.cnf looks like this: phone_label: "Zeeshan A Zakaria" line1_name: "523"

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If