similar to: Creating a clear channel on zaptel

Hello! I have been struggling with Asterisk 1.6 and DAHDI for the past few weeks. We are an outgoing call center with 30 internal analog phones hooked up to 2 Rhino CB24 channel banks. The banks are connected to a Rhino R4T1 card in a Dell 2950 server with 8 gigs of RAM. The 2 other ports on the R4T1 go to our 2 PRIs. In this configuration, we have trouble maintaining stability. It may be fine

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Hi, After some testing I've found out that my client's hardware recognizes DTMF only if digits are sent 50ms apart with 50ms of tone duration. This was tested using a test device which generates DTMF. Now asterisk doesn't do it by default because digits going out from Asterisk are not being recognized. Using command sendDTMF, I can control inter-digit duration, and using

Thanks Zeeshan, SAngoma told me that the asterisk problem is unrelated to wanpipe drivers, they told me to reinstall asterisk again But, i still having doubts about the problem :( Thanks in advance > > Message: 10 > Date: Thu, 18 Mar 2010 00:21:06 -0400 > From: Zeeshan Zakaria <zishanov at gmail.com> > Subject: Re: [asterisk-users] Asterisk DIES with no trace. PLEASE >

Greetings, I have created simple conferencing solution before using meetme application, but this times its a little tricky. My client needs a functionality to call multiple extensions to join a conference room. Extensions will ring like in a ring group, and on pick up, user will be either automatically added to the conference room, or maybe I'll program them to enter 9 to accept and 8 to

Hi list, I am planning a migration to virtual machines, and was considering with it to move from 1.4 to one of the later versions. My and my clients' 1.4 setups have been rock solid and I don't want to put myself into any unnecessary trouble. Those of you with solid experience with all these versions, what would you suggest? What new and exciting enhancements would newer versions bring

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hello list, What servers would you suggest for:100 concurrent SIP calls, 4xT1 card, and a not much busy website, i.e. getting 500-1000 hits a day. Thanks, Zeeshan A Zakaria -- www.ilovetovoip.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101020/8ab7ae3e/attachment.htm

Only 100? We had a single server over 300. From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Saturday, October 30, 2010 9:49 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Under heavy attack My count has reached 100 for the day. The server serves doesn't serve

Hi all, For a top quality setup, I will need to install high quality VoIP switches with QoS and PoE. My potential customer should not have any problem with call quality. Experienced folks, Please advice me what switches to install and at what price. I may need it for upto 100 phones. What else should I consider so that phones work without problem along with the computers on the same network?

Hi everybody, How can we add new contexts in asterisk realtime module? All I could figure out after googling is that a new context HAS to be declared in extensions.conf with 'switch => Realtime/@<databasetable>' under the context name declaration. This works fine as long as we are adding extensions only to this one context, but doesn't give the freedom to add new contexts for

For a while now I've been looking for a good web based soft phone solution, but so far no luck. A few solutions which I've tried, both Java based and Flash based, either don't work, or had bad sound quality. I need something which I could put on my productions server for my clients. Seems like good web based solutions are all paid ones, nobody is giving it for free. Any ideas,

Hello list, I have been using Cepstral's 8KHz voices for my text-to-speech service for some time now, and have been noticing that the voice quality is really poor, doesn't matter what phrase I give it to convert. None of the other 8KHz voices I have ever used were this bad. It doesn't seem good enough system to be used in a commercial system. Is there any better quality text-to-voice

My main asterisk server is under unusual heavy attack, and so far Fail2Ban has blocked about 30 IPs, from various different countries. At this time it is blocking about 1 IP address every few minutes. Just wondering if anybody else is also experiencing unusually increased hack attempts today? Zeeshan A Zakaria -- www.ilovetovoip.com www.pbxforall.com (beta) -------------- next part

For a new project, I have written a dialplan and it is pretty straight forward: The [dialout] context dials out a number, and h extension in this context writes the CDR. But what is happening is that if the callee hangs up first, all values in the CDR are fine, but if the caller hangs up first, the 'dst' column is always 'h'. I put a NoOp right in the begining of this macro to

Anybody knows why ARI gives this error message when I enter extension number and password. *Warning*: file(/var/spool/asterisk/voicemail/default/222/INBOX/msg0000.txt): failed to open stream: Permission denied in * /var/www/html/recordings/modules/voicemail.module* on line *525* It doesn't show the voicemails, although it shows that there is 1 or 2 voicemails in the INBOX. -- Zeeshan A

Hello list, I need to know how to deal with a redundant network with only one asterisk server, which is receiving registrations from the end points on both of its ethernet ports. This means extension 201 is registering both from eth0 and from eth1. Is there a way/software which can act as a middle man between asterisk and the ethernet ports, and by default sends registrations to asterisk only

Hello, I noticed that changes to realtime sip peers are not applied until a 'reload'. A 'sip reload' does not make any changes to realtime sip peers. When changing for instance the mailbox-parameter in the realtime sip_buddies table, the change is not applied with a 'sip reload'. For every change there is a complete 'reload' necessary. Why does a 'sip

I've got a 778 DID for vancouver, but don't know if it will be a local call if dialed 604 and vice versa. What are the different area codes in Vancouver and why its easier to get 778 DID than 604? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi List, When doing 'ael reload' on two servers, which are setup with asterisk 1.4.22 and 1.4.35 respectively, I am getting multiple lines of this strange error: ERROR[15483]: ael.flex:647 ael_yylex: Unhandled char(s): On three other servers with same versions of asterisk, i.e. 1.4.22, I don't see this error. Number of lines of the error are the same as the number of lines of the