similar to: Dumb Question - Dialing internal and external

Greetings listers, I have been running 1.4.21 for about 7 months now, but have been told I have to move up the 1.4 food chain or into the 1.6 chain because 1.4.21 is too flaky for our POTS line handling (does funny things with echo, doesn't connect to external conference calls, etc.). Which release will give me the most joy/least headache/closest performance to

Greetings fellow listers, I have an application where I have approximately 300 files that I playback individually or in blocks to simulate "text-to-speech" in a "less mechanical" voice than normal Allison files provide. These files are presently in GSM format and sound pretty good when I play them on my computer speakers or on my in-house

Greetings Listers, I'm running 1.4.21.2 on SUSE 11.0 with and zaptel 1.4.12.1 on a TDM400P. Most of my calls work great, but occasionally we try to connect to a customer or vendor external conference call and the call will drop after 60-65 seconds unless I have an Answer before the Dial in the dialplan. Isn't this solution a hack and what would be a better one?

Greetings, This may be a dumb question, but here goes. When I was on 1.4.21.2 using Zaptel, I had (at least as far as I could tell) access to line supervision on my POTS lines using a TDM400P/TDM410P. Since upgrading to the DAHDI branches of 1.4 (SVN and 1.4.26.1), I've only been able to duplicate the success of the 1.4.21 functionality once. To test what I'm talking

I sent the following message a few days ago, but never received a reply, so I thought I'd ask again.. Can anyone tell me how me to get asterisk to dial out a phone number using BTP when a bluetooth device is not detected? I can get BTP to dial to a SIP phone, but I can't get it to dial through a POTS phone line using the Zap interface.. I've tried putting the following under the

Greetings listers. I'm running asterisk 1.4.21.2 on SUSE 11.0 using Polycom 501 phones. My outgoing connections are Zapata using a TDM401P. For the most part I can make and receive calls fine except for these 3 issues: 1. When I call an external conference, the call never bridges and hangs up after 60-90 seconds. 2. When I call another number there is a

Hi listers, I am looking for people who have used Power over Ethernet switches, primarily in conjunction with Polycom IP 501's. I've been looking at the Linksys SRW224P, since I've had good luck with the SRW224 in our office. However, Nortel, Cisco, Adtran, etc. all have an offering, all of which vary in price. I would appreciate any input people have to offer. Thanks, James

Greetings all, This was most likely covered in one or more of the 15K emails I tried to categorize today. I'm running * 1.4.26.2 with TDM400P. When I call number 205-555-1212 (a land line), Asterisk indicates ringing after about 2-3 seconds. When I call 205-555-1313 (a cell phone), it takes 4-5 seconds to indicate. Is this a known problem and/or something I have to live

I am working with implementing Asterisk between four different AS5400's located in multiple sites with different PSTN gateways. I can get two of them to work without a problem, but I am getting the following on the others when I make a SIP call to the other two sites. Got SIP response 500 "Internal Server Error" back from 10.1.3.28 SIP/alma-1b77 is circuit-busy Everyone is

Greetings listers, I am running Asterisk 1.4.21.2 on Suse 11.0 on a Dual Processor Dell Poweredge 1650. I recently attempted to update the BIOS and now have this happen: When the machine starts up, Asterisk runs fine. When I do a large wget or scp, the local SIP to SIP quality goes to heck in a handbasket. The only resolution I've found so far is to completely

Hi Listers, I'm running 1.4.25-rc1 on opensuse 11.0 with dahdi-linux-2.1.0.3, dahdi-tools-2.1.0.2, libpri-1.4.7 and snapdsp.0.0.2. Incoming calls work fine. Outgoing calls made directly (exten => s,1,Dial(DAHDI/G1) then number work fine. The problem I have is trying to let Asterisk make the call (exten => s,1,Dial(DAHDI/G1/5551212,,r). If I use "m" (moh) the

On systems even key systems it is customary to have an 'internal' dial tone. Since Asterisk simply ignores the 9 and keeps the tone going it is hard to tell for some 'new users' if they can make a call. My first idea was to change the generated dial tone via source. Then if the user presses 9 go to a different context where I would record about 30 seconds of the normal dial

I've just setup a new asterisk box (cvs HEAD) with a digium tdm411 and a couple computers with eyebeam. I have one small. I cannot call the eyebeam clients from the phone connected the fxs port. I can call the phone from the eyebeem clients. And, I get both the fxs phone and eyebeam clients to ring when a call comes in through the fxo port. I have been trying to get this straightened out

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 We use Snom870 handsets with firmware v.8.7.3.19. I am trying to develop a custom dial plan to invoke a distinctive ring-tone when an external call is transferred internally. Based on an earlier solution I discovered I am attempting this: [from-internal] include => set-alert-if-local [from-internal-original]

adding gsm or just comment out the disallow and the 2 allows. (your = recipient is using a codec that isn't ulaw or alaw). =20 _____ =20 From: asterisk-users-bounces at lists.digium.com = [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel = freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

Here's a possible bug, or more likely, I'm just missing something. We have a pots card in one of our asterisk boxes. Its a simple asterisk setup with one FXO/FXS card and basic static extensions file, etc. When we dial out over the pots line, 4 out of 5 times, it will work. However, every 4 or 5 times, we get an error back from the provider that says "The number you have dialed.....

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

expected context is valid (may not work on 1.2, I started this ride at 1.4 and therefore have no backward knowledge). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Nickel Sent: Wednesday, May 05, 2010 4:41 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Hash Dial