similar to: Problem with dialplan -> gotoif ?

Hi I am in the process of move a company from pstn to an asterisk setup. They had 2 pstn lines - only really needed a max of 2 previously. Now I have installed a tdm410 to handle the cross over from pabx to voip handset. this has been done, the tdm is now just used to provide a backup pstn line - only used as a last resort for outgoing calls - as its shared with a fax line. I use 2 voip

Hi, I'm using the macro below in extensions.conf for most of my outbound calls. One issue with my current configuration is that when I make an outbound call it doesn't properly detect that my PSTN line (Zap/1) is busy with another call and then overflow to my outbound IAX connections. I think the root cause is that DIALSTATUS gets reported as BUSY. The debug output is below. My desired

I can dial from 601 to a public number. The public number rings. I pickup and hear nothing, while on 601 it keeps ringing. (BTW, is it right to say "ringing" on the active phone?) The *CLI> doesn't show me anything useful: Executing Macro("SIP/601-8238", "dial-pstn|88097880|") in new stack Executing SetGlobalVar("SIP/601-8238",

I got two phones on an ATA-186 (601, 602) and two phones on the TDM22B (603, 604). I have two lines on the TDM22B. I cannot figure out some of the problems: 1. 601 dials via ZAP/3-1 to local phone number at PSTN: ringing pickup on PSTN (empty) still ringing in the phone set 601 2. call from PSTN back: 601 picks up ... everything works !!! No caller id shows up 3. For testing I have only one

Please excuse my ignorance as I''m a linux newbie. Basically I have a setup of an adsl ethernet modem (nated and then everything forwarded to the external ip of my Mandrake mnf firewall) connected to the mnf firewall which then connects to the lan. internet <--> adsl modem <--> mnf firewall <--> lan There''s only 2 nics in the mnf firewall so it''s a

Today, the Mandrake Store here in the US have made available for sale their "Multi Network Firewall" (MNF). MNF is built around Shorewall and has a lot of nice features including a cool GUI. MNF has been under development for almost a year and is Mandrake''s next-generation firewall product. For those of you who are using Shorewall in a commercial environment and who are

I upgraded to 0.7.1 from a cvs version from a few weeks before 0.7.1 was relesed. now I am having troubles with my dialing plan and voice mail. As part of the upgrade I re-built the machine so there was a blank slate however after installing 0.7.1 I had no mail box creation script and could not figure out how to go about creating a mailbox, any suggestions would be usefull. I have looked at

I have a dial plan that includes a company phone directory as a main menu option. If they just sit at the main menu, after 20 seconds, they are transferred to the operator. If the user picks an extension from the directory, they are transferred to the proper extension. If the called number is not available, they are transferred into VoiceMailMain. They leave a message, and hang up. The hang

So, incoming calls on zap work just as I expect them - an intro is played, the caller hits 1 for sale 2 for support or dials an extension. I'm using the privacy option for all extensions. When calls come in from zap, they caller is played the priv-recordintro recording, they say their name, and everything happens normally from there on out. However, when the call comes in from sip and

Hello All, I was wondering where does Asterisk stores the blacklist numbers? I looked into the dialplan and it shows that it *"Set(DB(blacklist/${blacknr})=1)"* the number... Does it save in MySQL DB? hyperion*CLI> show dialplan app-blacklist-add [ Context 'app-blacklist-add' created by 'pbx_config' ] '1' => 1.

Hi Everyone, After a fair amount of faffing ive managed to get the 2000w working with asterisk for IP -> PSTN calls (i.e. get the phone to make and receive calls over our BT line). The final solution is to set up outgoing VoIP calls but I now know that without a SIP aware router I can think again! (damn you iptables!) In the mean time I'm trying to figure out why I can't get the

Hello everyone... I'm trying to get up a testing pbx installation. Following instructions of what've read from the handbook and from asterisk's wiki, I wrote the dial plan as follows: [general] ; ; static = yes ;[globals] ; [default] ; exten => 0,1,Answer() exten => 0,2,Playback(fcopba1) exten => 0,3,Hangup() exten => *0,1,Answer() exten => *0,2,Record(fcopba1:gsm)

When I first to the "add extension" the "show dialplan" has the lines that say "SIP/" but after I do a "save dialplan" and a "stop gracfully" and restart the lines with "SIP/" are gone. ************************ "Show dialplan" before: ************************ asterisk01*CLI> [ Context 'default' created by

Hi, How does * read and process the extension.conf file?? The reason I ask is that I think it probably has a very large impact on how the calls are routed and processed by the system especially when it comes to least cost routing.. Let me explain...with an example.. I am using the * Devkit to get to grips with the system, so I have and X100P (Zap/1) and and S100U (Zap/2).. Below is my

I have a hfc-usb adapter connected to a Samsung PBX, and am having a bit of trouble. With capi, using 'immediate' mode, I can get the dialplan working just fine, except that there is some sort of interference in the audio, and I'm not quite sure how to describe it except that it's sort of like clicking and popping but not harsh at all, and more like just bits of audio missing.

I have an "outbound-ld" context as follows: [ Context 'outbound-ld' created by 'pbx_config' ] '_1NXXNXXXXXX' => 1. Macro(enumdial|${EXTEN}) [pbx_config] 102. Wait(1) [pbx_config] 103. Set(LINE=${IF($[${LINE}=pots]?link2voip:${LINE})}) [pbx_config]

I have a [start] context that all my inbound and '0' calls are routed into. Because of the way I want to set my system up, I want to prompt the user to enter a 1 if they know the extension, or a 2 for a directory and nothing else. It works, however there is a 5 to 10 second delay after enter the 1 or 2 before the system responds. I have read over the wiki on how asterisk handles digit

On 1.6.0.16-rc1: I'm using app_fax.so to send a fax, and then send a confirm. 'send' => 1. Set(UniqueFile=/var/spool/asterisk/outgoing/call-${UNIQUEID}) [pbx_config] 2. System(env echo -e "Channel:DAHDI/g0/........\\nContext:fax-tx\\nExtension: s\\nPriority: 1\\n" >${UniqueFile}) [pbx_config] [ Context 'fax-tx' created by

Greetings, Running CVS HEAD about 3 weeks old, I have been beating my head trying to get this to work properly.. Or at least figure out what's going on. Maybe I have done things wrong... I have created a 'catch all' extension at the end of our last context where all phones & voicemail extension exist. This catch all is included in all and works quite nicely except when voicemail

I'm experimenting with asterisk. This is my environment: - Debian sarge (vanilla kernel 2.4.29) - Asterisk 1.0.7-BRIstuffed-0.2.0-RC8g - Two sip phones (One cisco 7905 and one soft-phones X-Lite) - Digi International Datafire Micro V (Europe) (rev 02) (zaphfc) After two days of work now I can call between the two sip phones and I can call from sip phones to outside numbers via ISDN card.