similar to: Aastra 51i and PAP2T behind NAT

I was having problems getting a Linksys PAP2T-NA to work with Pitney Bowes mailing station so it could use its modem to dial home and download postage/software updates. After scowering the web, I couldn't seem to find a definite how to article on what settings were needed. I finally came up some settings by combining the information from various places around the 'net. I have typed out

i have the problem in the hardware linksys pap2t, I am install asterisk with asterisk-gui and work fine but the hangup the phone (linksys pap2 t), no tone and sound like tu,tu, tu , tu , tu , tu , tuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu what is the problem with phone ??? add param special??? Note: i am mark number phone and wait ... sesonds and call. thank you. -------------- next

Hi Everyone I think PAP2T supports DynDNS and other Dynamic DNS providers. I have a box that needs to be secured at all times. Currently it's not connected to the internet. If it were connected, I would have iptables block any and all traffic from outside but I want a single device - Linksys PAP2T - to be able to connect back to the server. That is a stand alone device and doesn't support

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

Hello All, I am looking at doing some video conferencing with SIP. I was hoping to get some early pointers from any one that is currently doing this. I have been all over goggle and voip-info and there is a ton of anecdotal information but, I was hoping for more specifics of what people are actually using that works and even some of what hasn't worked so that I can stay away. What I am

I am looking for pros and cons on the Intel Atom cpu. Has anybody been using these in production? I am looking at an Atom D510 (dual core 1.6GHz, 1M cache) to run maybe 25 to 30 extensions, 4 or 5 calls at once(maybe as high as 7 simultaneous calls), g729 all the way through except voicemail will be wav format for email purposes(requirement). I will be tying 3 of these together to route

Hello All, I have Asterisk 1.4.5 running on a SuSE 10.3 x86_64 2.6.18.2-34 I upgraded from 1.4.2 to 1.4.5 on sunday the 24 of june and since have been getting: Internal RTCP NTP clock skew detected: lsr=1402479300, now=1402675136, dlsr=196500 (2:998ms), diff=664 I see an entry in Mantis that Russell fixed code so that this will not show when it shouldn't. Would i be correct in

Hello All, I have a requirement to setup a predictive dialer for a customers call center. I am asking for pros and cons of the different dialers available for Asterisk. If you are going to send marketing material send it to my e-mail directly please and not to the list. I was hoping to get the opinions of any one using any of these dialers and what they liked and didn't like, ease of

Hi all, Is it possible to send a SIP header to a PAP2T or SPAxxxx and cause the device to automatically answer? I can do this with my Polycom phones and would like to do it with my ATA's. Any ideas? -- Take care and have fun, Mike Diehl.

Hi Folks, I know the PAP2T-NA has a jitterbuffer.... however, it seems to be adaptive, which is fine for most situations... however, is there some way I can either: A) Specify how long it waits before it starts to shrink? B) Specifiy a fixed sized jitterbuffer? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all. I received a PAP2T-NA from a potential customer to see if I could get it configured for testing. I plugged it into my network and plugged a phone into it and attempted to do a factory reset from the handset. I pressed "****" and got NOTHING! Just silence. So, is this TA a brick? Or is there additional voodoo that I'm not aware of? Mike.

I'm trying out a Linksys PAP2T-NA. Calling out works great, no problems there. Calling in, though, the phone doesn't ring. Caller ID shows up, I can pick up the phone, and the call is connected, but no ring. I've tried it on two analog phones, same behavior. Suggestions? Asterisk SVN-branch-1.2-r31555. - James Moore

I've got a PAP2 that I've got working with asterisk. At the moment, its configured so that when a phone is picked up on it, it connects to Asterisk. My hope is that I can let Asteirsk handle the entire dialplan, including dial tone generation. What would my context in extenstions.conf look like for this sort of dialing. More accurately, how can I get Asterisk to generate the dial tone on

Here is Mexico the phone company uses a DSL router from 2Wire which in my opinion is quite bad. I am having problems getting PAP2T adapters connected to Asterisk using these routers. They connect fine but after about 5 minutes I get a message on the Asterisk console that the ATA is unreachable. So far the only way I have found for the ATA to stay connected more than five minutes is to put it in

Does anyone know how the Linksys PAP2T ATA's can be mass provisioned? Documentation seems to be sketchy, even on the Linksys web site. Thanks, Doug. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070607/3f90695c/attachment.htm

Hi all, I'd like to know how I can turn off the "splash ring" voicemail waiting indication on a PAP2T from the provisioning XML file. I can do it from the web interface, but I need to do it on "a lot" of machines.... TIA, -- Take care and have fun, Mike Diehl.

Hi all: when i make a call from linksys pap2t to an asterisk server a fake ring is heard some times ,but when sending calls between 2 asterisk servers through sip no fake ring is heard but real one. any suggestions please. _________________________________________________________________ Windows Live?: E-mail. Chat. Share. Get more ways to connect.

Hi all, I've got a customer who has a complaint about the splash ring that tells him that he's got voicemail waiting. My understanding this that this signal is being generated by the PAP2 and not astrisk. Anyway, he'd like to change the ring tone so that he can distunguish it from a regular call. Can this be done? -- Take care and have fun, Mike Diehl.

Hello all, Was hoping to get a sanity check along with a question. Below is the output from top run with normal defaults, except to show both CPU's, on a SuSE 10.2 box with Asterisk v1.4.15. top - 10:00:58 up 3 days, 5:54, 4 users, load average: 0.15, 0.05, 0.01 Tasks: 110 total, 2 running, 108 sleeping, 0 stopped, 0 zombie Cpu0 : 0.2%us, 0.2%sy, 0.0%ni, 97.3%id, 2.2%wa, 0.1%hi, 0.0%si,

Hi all, I'm trying to provision my PAP2T's to use a SVR lookup to find the Asterisk server. I'm using a provisioning file that contains an element like: <Proxy_1_> _sip._udp.example.com </Proxy_1_> However, the PAP doesn't seem to be able to find my server with this hostname. The DNS records are in place because my Polycom and Grandstream servers work just fine.