similar to: Intermittent metallic voice SIP->ISDN ISDN<-SIP

Hi, I have installed Asterisk 1.4 with mISDN with the install-asterisk.tar.gz script from beronet.com. On my system I have two cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to work well with mISDN on my system from a previous installation. Now however, the AVM card works well at first glance, i.e. it "registers" incoming calls and works through the asterisk

Hi list, I've installed Asterisk 1.4.0 with newest mISDN 1.0.4 + mISDNuser 1.0.3 on Fedora Core 6. I get many compilation error on mISDN. It wants to include linux/config.h That I fixed by removing the #include line at every occurance. (Don't know if that was a wise move, but it then compiled). mISDNuser and asterisk compiled fine, and asterisk can find and use the ISDN BRI port in

Hi. When I call my RNIS numbers (with a mobile phone for example), I can see 2 incoming calls on the IPBX, which should not happend. I'm not sure if it's a problem with the telco France Telecom and their ISDN setup, or if it's a problem with the MISDN driver on the IPBX itself. I'm stuck ... Any advices for troubleshooting that? Someone provide working configuration files

Hi all, I'm planning to migrate my courier-imap imap server to dovecot, but I'm experiencing a strange issue with fts-lucene plugin. Basically, every time I start a search, the log starts to write: Apr 05 19:30:53 indexer: Error: Indexer worker disconnected, discarding 1 requests for XXXXXX Apr 05 19:30:53 indexer-worker(XXXXX): Fatal: master: service(indexer-worker): child 809 killed

I would like to know if the following misdn warnings are relevant. Currently, I don't need echotraining. However, I took a quick look at the * source code and l1watcher_timeout seems to be defined (echotraining was not found). Currently I'm setting l1watcher_timeout to 0 which is default (so I suppose that this warning won't affect me). Any comments on this? *CLI> misdn reload

Asterisk 16 latest DAHDI 3.0.0 latest Excerpt from chan_dahdi.conf is shown below. I'm trying to enable fax detection on inbound calls so that I can take appropriate action in the dial plan. "dahdi show channel 1" shows "Fax Handled: no". Does that mean that I don't have it configured correctly? [channels] ; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span

I'm wondering if hdlc can be the culprit (not sure what it is and what it does). Should I set hdlc to yes in misdn.conf (I'm asking before testing because this is a production system)? misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes

Hi all, in fact, I found that this feature is not implemented yet... the vorbis setup returns : OV_EIMPL The bitstream makes use of a feature not implemented in this <p>But, is it possible for the ices developpers to change encode.c:encode_initialise to display the vorbis return code? int ret = vorbis_encode_setup_managed(&s->vi, channels, rate,

I'm not sure this it the problem, because whatever the encoding if (managed or not), the problem is there. To listen to the problem: http://www.stalig.com/radio_ices.ogg The ices stream in a file (a few seconds) http://www.stalig.com/radiofree.ogg The darkice stream in a file (a few seconds) Looking at the content of the ogg files, we can see there are using the same vorbis lib even if i

On Tue, Jan 1, 2019 at 7:26 PM Sami Ketola <Sami.Ketola at open-xchange.com> wrote: > Believe me it does. I used to work for Sun Microsystems for 14 years in > Solaris support and sustaining and I can guarantee you that it does. > > You problem is that Solaris has concept of Secure Runtime Linker, and for > trusted applications most of LD_CONFIG and LD_LIBRARY_PATH is ignored

Hi, I don't know why, but the stream generated by ices sounds very metallic, compared to the radio, and compared to a stream of the same quality with darkice. I tried different parameters, but it doesn't change. My parameters are : <input> <module>oss</module> <param name="rate">44100</param> <!-- samplerate --> <param

Hi all, I have some trouble with Visual Basic application. When the application try to open their files it gives me : Error 48 loading DLL Log file is : switch message SMBopenX (pid 2296) unix_clean_name [./ABC/ABC.EXE/2] unix_clean_name [./abc/abc.exe/2] Error opening file ./abc/abc.exe/2 (Not a directory) (flags=0) 07/26/97 19:26:23 error packet at line 1070 cmd=45 (SMBopenX) eclass=1 ecode=5

Answer inline. On Sun, Dec 30, 2018 at 12:59 PM James <list at xdrv.co.uk> wrote: > On 29/12/2018 13:49, Pierluigi Frullani wrote: > > > My version is 2.2.13 ( it was the last one, at the time of the first > > server setup ). > > 2.2.13 is from around May 2014. It worked but I can't see why you > wouldn't switch to the latest 2.3.4. (You might be seeing

Hi all, I've just upgraded my old Solaris 10 update 8 to Solaris 10 update 11 with the latest patches, but after the reboot with the new update I'm having a lot of problems with dovecot. My version is 2.2.13 ( it was the last one, at the time of the first server setup ). I have seen that ( it seems ) the new solaris don't honour the LD_LIBRARY_PATH. The first error was a

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

You're quite right. We'll need to see your misdn.conf file to check the settings. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 13:49 -->> To: asterisk-users at lists.digium.com -->> Subject:

Hello, in the AppDB i have seen, that FAKK2 is fully playable on wine. After installing the game i started it and it runs really nice but it has no sound at all. On the wine sound settings i have tested all sound settings and all give back a test sound but whatever i check - in the game there is no sound. I haven't seen any error messages in terminal. Maybe there is something in the ingame

Hi, I''m using Rails Metal to serve certain files, But i don''t know how to change the filename ... Here is the code in Metal where i send the file : [200, { ''Content-Type'' => file.content_type}, [file.read]] I tried to specify ''filename''=>''test.zip''... but without success... Anyone has a clue ? Thanks, regards. --

On 8/25/15, 12:25 AM, Treuillard, Benjamin wrote: > The aim of my project is to transmit voice over CAN bus. CAN? 8 byte transactions. CRC. Bit stuffing on 5 bit repeats. Automatic retransmits. No ordering. Really? I guess if you *have* to, but I would pick pretty much *any* interface standard *other* than CAN for audio. > The main issue I have is that opus fail to allocate memory,

Hi, I'm new to the forums and decided to join it in case of future problems with programs related to wine. Anyways, I have a problem with this free game called Wild Metal. There aren't any graphical problems that I can see but the game doesn't my keyboard. Has anyone else tried getting this game to work? You can download it off the Rockstar website under free classic games.