similar to: 1.6.1 + TDM840 FSK MWI problem

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Off topic but I am after a DECT phone to connect to my sipura 3000 that has a FSK VMWI light or flashing envelope on the LCD screen. Any ideas Chris

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3050 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20060309/33760a15/smime.bin

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

Hi Isamar maybe I think disclose your code to CVS is best and fast :-) mack > > Hi folks, > > I'm trying now to play with fsk_modem.c and callerid.c > to get the Japanese callerid working and I already got to make some > steps.. > I don't know if anybody accomplished that already... but > Since two or more minds think better than one, send private messages >

hi group , i am working on dahdi_monitor for measuring voice quality , so i want to know that on which data i can tell that this PRI lines are working properly, is there any measurement on basis of that i can make MOS. i am working from last 2-3 days but i only get idea about making .raw file and making .wav file and visulal mode of RX and TX of PRI line. what i want is measurement of voice

Hello I've been googling for a couple of days now, but still can't figure out what to put in zapata.conf to get it to report CID. Unless I'm mistaken, France uses ETSI FSK for CID method and bell 202 as CID FSK Standard: http://img219.imageshack.us/img219/7207/linksys3102cid1jj7.jpg http://img219.imageshack.us/img219/4625/linksys3102cid2ld5.jpg Does Zaptel support those on Digium

Hi, I'm currently having problems detecting FSK BT (UK) caller id in our API (Pika boards). I have a recording to test on but it is giving me checksum errors. I'm wondering if someone from UK using BT lines could send me a recording with the FSK signal so I can have more data to work on? If you have something, please send it to paulo.astuser at gmail.com. I appreciate all help about

hi: in our country callerid is sent with fsk. but it will sent DTAS(dual tone alerting signal) first, then fsk callerid, then first ring. I search google, but didn't find the configuration method or patch for this. any good suggestion for asterisk to detect this? I have trid asterisk 1.4 and 1.6.2. thanks for help!! Regards, tbskyd

My outgoing FXO calls are answered but have no audio in either direction if I have callprogress=no in chan_dahdi.conf. If I change to callprogress=yes then the audio returns. My chan_dahdi.conf file is listed below. Can anyone point-out why callprogress=no isn't working? #cat /tmp/a [trunkgroups] [channels] language=en context=incoming toneduration=40 ;usedistinctiveringdetection=yes

Hello, I need to convert the dahdi_monitor output to dBm0, so I can measure Echo Return Loss in dB. I've read a formula that calculate S(k) in ITU-T G.168 recommendation, where S(k) is the signal level in dBm0. Can I use this formula to convert it? If yes, what value should I use to the number of samples if I want to convert a single output from dahdi_monitor? -- Thanks in advance, Gustavo

Basically, pretty much all the 2 line cordless systems I've seen come with a built in digital answering system that I'll never use, the main problem with this is that these units don't support VMWI (visual message waiting indicator) with telco supplied voicemail. This is a problem because I'll be setup an Asterisk system in the next month or so to handle my 2 analog and 1

I am studying about echo cancellation in asterisk and I want to use the numeric information from dahdi_monitor verbose for my research. Unfortunately, I couldn't find anything about the unit of measurement used in this tool. Which unit is used to measure the signal level? -------------- next part -------------- An HTML attachment was scrubbed... URL:

see below I tried to call 98013356 from the following phone (from mgcp.conf) [iptlf03] host = 192.168.33.3 context = default inbanddtmf = 1 callerid = 22545062 line => aaln/1 Console output: == Spawn extension (capiring, 9988001133335566, 1) exited non-zero on 'MGCP/aaln/1@iptlf03-1' -- MGCP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03 -- Delete connection 4

Hello, I was hoping that this would work: http://blogs.sun.com/zhangfan/entry/how_to_turn_a_mirror I have 4x(1TB) disks, one of which is filled with 800GB of data (that I cant delete/backup somewhere else) > root at FSK-Backup:~# zpool create -f ambry raidz1 c4t0d0 c5t0d0 c5t1d0 > /dev/lofi/1 > root at FSK-Backup:~# zpool list > NAME SIZE USED AVAIL CAP HEALTH ALTROOT

Hi dears, I am from saudi arabia and using asterisk 1.6.2.13,Dahdi-2.3.0 and Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) . I am facing problem with detecting caller id before first ring.I recorded the dahdi channel using dahdi_monitor command. Where I am able to see and hear caller-id dtmf tones. Pl tell me the procedure to upload recorded file if you needed. Something I want

May be I have fiddled too much with my sipura settings but I can't get it to give the stutter tone when there is a new voice mail waiting on the asterisk box. I can either get a stutter tone all the time or not at all. Anyone got this working. Thanks Chris

Hi I am currently using 1.2.x and 1.4.x behind OpenSER. One of the things I do on INVITES is to re-authenticate the user from OpenSER. Then when the INVITE gets passed to Asterisk I capture the AUTH to a variable in the dialplan and pass to an AGI script. I am now trying to set the same thing up in 1.6 However because the argument delimter in 1.6 has changed from pipe to comma this breaks as the