similar to: Zap / dahdi errors

Hi, I'm getting the following error from an asterisk 1.6.0.9 installation: [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? [May 20 06:07:18] ERROR[18517]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler This repeats a few times, then asterisk crashes. I can't seem to locate any info on this error at all. I'm using

I'm trying to build a test suite so that I can run "calls" through and verify the call results. I've made a cross over cable and linked my 2 ISDN30 ports together. So now I can dial out on span 1 , and to receive the call on span 2. in the context for span 2, I have the following: <snip> ; #1 "answer" a call and play music 000XXX : ring for a random period,

I attempted an upgrade of our production system from Asterisk/Zaptel 1.2 to 1.4 this weekend. Intially everything looked like it was working properly, but some time in the day following the upgrade, the system died to a kernel panic. I wasn't able to catch the entire kernel dump on the console unfortunately. I attempted to isolate the panic, and found that when 'service zaptel stop'

HI, I'm using asterisk-1.4.24, dahdi-linux-complete-2.4.0+2.4.0 and libpri-1.4.11.4 When dial, when 492131 answer, in console appear some error messages -- AGI Script Executing Application: (DIAL) Options: (DAHDI/g1/492131|60) -- Requested transfer capability: 0x00 - SPEECH -- Called g1/492131 [Dec 4 11:15:59] WARNING[7669]: chan_dahdi.c:1776 dahdi_enable_ec: Unable to enable

I'm running 1.8.2 rc1 on a Centos box with dahdi-linux-complete 2.4, using the wct4xxp module. All operations appear normal however I noticed an error repeating occasionally on the console. [Jan 10 13:53:05] ERROR[6906]: chan_dahdi.c:13691 dahdi_pri_error: 1 ROSE RETURN ERROR: [Jan 10 13:53:05] ERROR[6906]: chan_dahdi.c:13691 dahdi_pri_error: 1 INVOKE ID: 11 [Jan 10 13:53:05] ERROR[6906]:

Dear Customer Support, i connected the asterisk to a e1 interface of our hipath4000. outgoing calls from a sip peer of my asterisk to an up0 telephone which iss connected to the hipath4000 are working. If you want to dial from an up0 device to the e1 interface where asterisk is connected to, you have to use the prefix 83. But when you enter the 3rd cipher this error appears at the cli

Starting from today i am receiving the following errors on asterisk.. What can be the reason for it? [May 7 11:45:16] ERROR[14885]: chan_dahdi.c:10515 dahdi_pri_error: ACK received for '0' outside of window of '3' to '4', restarting [May 7 11:45:16] WARNING[14885]: chan_dahdi.c:3347 pri_find_dchan: No D-channels available! Using Primary channel 16 as D-channel

Hi, I suddenly started to receive an error like [Aug 4 14:26:57] ERROR[2477]: chan_dahdi.c:10515 dahdi_pri_error: No more room in scheduler [Aug 4 14:26:57] ERROR[2477]: chan_dahdi.c:10515 dahdi_pri_error: Asked to delete sched id -1??? and it went on till i reboot asterisk and dahdi services.. I wonder what caused this error, because there were no physical problem between pbx and asterisk

I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting slips and ask me to update the clock source. I have my system.conf set as the following but when I run dahdi_scan only the ports on Card 1 are showing up with syncsrc=1 system.conf : span=1,1,0,esf,b8zs bchan=2-24 mtp2=1 span=2,2,0,esf,b8zs bchan=26-48 mtp2=25 span=3,3,0,esf,b8zs bchan=49-72

Hi All, I am facing problem with E1 line. I have installed Asterisk (1.4.20.1) on a system with Digium TE420 card (Zaptel- 1.4.10) But every now and then I face problem of down E1's. The log show lot of entries like "pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2" This happens on a regular basis and the E1 becomes up after some time. My

Hi, Running 1.4.26.1 here. I have installed TE420B card in my server, and followed the appropriate steps (as far as I know to configure it). This TE420B is connected to a CLEC (T1s), so I am using pri_cpe as singalling type. When I dial out, I get this message: Dec 4 11:37:31] WARNING[27983]: app_dial.c:1275 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

Hi all, I'm having some problems getting TDMoE setup for the 1st time. I have a TE405P installed in the main server with an ethernet cross-connection to the secondary machine. (Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.) I'm using -HEAD from yesterday. On the main machine /etc/zaptel.conf: loadzone = us defaultzone=us

Guys, I'm trying to configure a TE406P with MFC/R2. here goes my zaptel.conf: span=1,0,0,ccs,hdb3,crc4 cas=1-15:1101 dchan=16 cas=17-31:1101 span=2,0,0,ccs,hdb3,crc4 cas=32-46:1101 dchan=47 cas=48-62:1101 The first strange behavior is that the: zap show status shows this: Description Alarms IRQ bpviol CRC4 T4XXP (PCI) Card 0 Span 1

We are using AAH with Asterisk 1.2.7.1 with a TE405P as listed below. We are getting frequent restarts on the spans which lead to dropped calls. I have pasted some hopefully pertinent information below -- anyone have any clues that might help? Thanks Next line is repeated throughout messages, going through every channel in every connected span. asterisk/full.1:Apr 24 01:15:25 VERBOSE[4196]

Hello, I have a busy problem with Asterisk when I try to transfer a call from PRI directly to IVR. This problem appear sometime after 2 hours or 2 minutes. The log file contain : Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion) When this problem appear I must restart Asterisk to solve it. Another thing, I don't know why the alarm is set to NOP on SPAN

hello list i have installed 2 diguim card in my server using asterisk 1.4 (i use the old version with zapata.conf and zaptel.conf) i want to use the span 1 for group 1 and span 2-span 6 for the group 2 (i want to active the round-robin for span 2 and 6) in order to activate the WIMAX and FH please see the configuration below and tell me if there is anything wrong question 2: what is

hello list, i have installed 2 diguim cards in my server using asterisk 1.4 (i use the old version with zapata.conf and zaptel.conf) i want to use the span 1 for group 1 and span 2-span 6 for the group 2 (i want to active the round-robin for span 2 and 6) in order to activate the WIMAX and FH please see the configuration below and tell me if there is anything wrong question 2: what is

Hi, I have a digium card (igium, Inc. Wildcard TE405P quad-span T1/E1/J1 card 5.0V (rev 02)) 4 ports I want to make a loop test between digium card E1 to test the configuration of dahdi What I want to do scenario is I connect port 1 and port4 in the digium card with E1 cable SIPcall-->E1 Digium port 1--->(Loop)E1 port 2---->sip extension local. kindly can any can help me to

Hi, I'm having problems with a TE420P card, in which I cannot make calls using spans 2 through 4. After a couple of days of working correctly, spans 2, 3 and 4 start failing (can not make calls). The system is configured to work with SS7. After the ACM message goes out, immediately a REL message is returned. I searched for error messages in /var/log/messages and could not find a clue