similar to: 7940g

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

I have a Cisco 7940G IP Phone. I am trying to load the firmware to SIP 3.2. The Phone just hangs in Defaulting CM to TFTP Server. It doesn't do anything else after that. I also have two other 7940g's that are the Universal Application Loader mode and say Protocol Application Invalid. I need to know what I can do to fix both these problems. I am running Asterisk@Home version 1.0. I have to

Hello all, I know this isn't strictly Asterisk, but I'm sure that there are more people here using the Cisco 7960 w/ SIP, so I thought I'd post here. I've just bought a Cisco 7960 phone to use with Asterisk. It came with the CallManager image on it. I've got the 4.4 SIP images (P0S3-04-4-00). If I put "P0S3-04-4-00" in the OS79XX.TXT file, the phone downloads this

Hi, I can't upgrade an old 7960 from SCCP 3.0 to SIP 7.5. Could you help ? From http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080094584.shtml#sccptosip2, I got the following: 1. Copy the desired binary image from Cisco.com to the root directory of the TFTP server. 2. Specify the image in the configuration file image parameter for the protocol

This I am sure is a very easy question, but I can't seem to find the answer. Here is the scenario: cisco 7940g phone has SIP 6.3 firmware applied the file SIP<mac>.cnf does not seem to have a place for it: image_version: P0S3-06-3-00 #line 1 settings line1_name: "5010" ; Line 1 ExtensionUser ID line1_displayname: "5010" ; Line 1 Display

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

Hi all, i have a problem with some cisco 7960. Yesterday i did a firmware-upgrade from 3.1 (1.2) with P0S30203.bin as described in the most documents. Now i get the message Phone unprovisioned and in TFTP-Log i find the following line: 07.03.2005 19:58 :Timeout error sending P0S3-07-3-00.bin to 192.168.0.83, 0 bytes So i think it now wants to load the file P0S3-07-3-00.bin. But i have not

2 new Cisco 7960 phones are requesting a CTLSEP file, seems like I triggered the universal application loader. I want to load the sip image 7.2 According to this Cisco information: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps4967/products_upgr ade_guides09186a008022a968.html#wp1047292 If the CTLSEP MAC file is not present or is empty, the phone proceeds in nonsecure mode with the

Typo in your OS79XX.TXT P00 ? instead of P0S !? -----Original Message----- From: Michael L?jtnant [mailto:ml@zyxel.dk] Sent: 17 August 2004 13:31 To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] Cisco 7.2 firmware for SIP 7940/7960 released Hi Shaun, Saw you post, and rushed to their ftp-server and downloaded it :-) But, I can't make my phone (7940) upgrade, so maybe you

Hi all, So I have been reading through the docs available online and the different threads on this list, but I cannot seem to get this phone to work. I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached), when I configure the phone to point to my tftp server and reboot it I get this message: Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750] Read request

Hi, I have been trying to get my 7960 & 7960G to register with two seperate * servers. Asterisk box 1 is on out on the Internet running: Asterisk CVS-10/30/03-20:08:15 Asterisk box 2 is on the Lan running: Asterisk CVS-12/19/03-19:28:30 7960 is on the LAN running: P0S3-04-4-00 7960G is on the LAN running: P0S3-06-0-00 In sip.conf I have nat=yes to get the phones to register properly.

Dear All, I'm trying to configure my new phone Cisco 7960 to work with asterisk. I followed http://www.asteriskguru.com/tutorials/cisco_7960_ip_phone_configuration.html and I got into the point where I can see on the the display line indication showing "55 <phone icon with x>" so it looks like the phone is not registered. The phone and the asterisk are in the same local

Here's a clip of comments lifted from a Cisco bug list. This will be perhaps useful to those of you who have just purchased a Cisco phone off eBay. JT ------------- (1) Short problem description: Documentation on how to load SIP image on phone with skinny software (2) Longer problem description (what happens): If the phone is loaded with the Cisco Skinny code, then there is a small

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

Hi All, My current 7940 phones use P0S3-06-3-00. I'd like to upgrade them so they're not massively out of date. I found a page at http://www.voip-info.org/wiki-Asterisk+phone+cisco+79xx that gives some info, and using the cisco links there have tried to upgrade. According to the procedures, I should be able to upgrade, but once the phones loaded and reboots it says it downgrades

Hi, I got a problem of having to upgrade 35 Cisco 7960 phones from default firmware of 3.1 to 7.5. The problem I get is that when trying to upgrade I see on the tftplog that it can't seem to find the file (8 character issue). So I renamed the files to suit what is supposed to be in them. I am trying incremental upgrades from 3.1 -> 5.3 -> 7.5, with no luck. It goes to

Hi, I've downloaded for a demo, a P0S3-08-12.zip file which is suppose to work with 7960. Is it supposed to be the same file that the one needed to 7942 model ? At the moment, my 7942 is blocked when trying to download a P0S3-8-12-00.loads file. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest