similar to: No subject

This is a small 12 line system, internal extensions 150 - 180. I didn't have a phone on 151. Here's the sip.conf stanza: ;;[151] ;;type=friend ;;context=longdistance ;;callerid="Conf Room" <151> ;;secret=0000 ;;host=dynamic ;;qualify=yes ;;dtmfmode=rfc2833 ;;allow=all ;;defaultuser=151 ;;nat=yes ;;canreinvite=no There's no DISA. And then somehow (how???) ip address

Hello list, I have an Asterisk setup with the following details: 1. 3 x internal extensions / sip hardphones - Grandstream 2000 2. 2 x internal extensions / dahdi cordless phone 3. 1 x 2 FSX ports OpenVOX pci card 4. 1 x internal sip extension / sip softphone (linphone) 5. 1 x 800Mhz Asterisk + Linux server 6. Asterisk version is 1.6.2.13 7. 1 x IAX2 incoming trunk from phone provider for 1

I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS modules. I'm trying to set-up things to route analog fax calls from a FXO port to an analog fax machine on a FXS port on the same card. Outgoing faxes work just fine. But incoming faces are routed to the right DAHDI extension, but the call dropped right as the fax machine rings for the first time. The fax machine

Hi! Maybe someone could help me out? When a call is routed via a2billing AGI and user does a transfer, the call is dropped. If the trunk is called directly everyhing works. Here's a direct scenario (working fine): [pbx000001] exten => 101,1,Set(__TRANSFER_CONTEXT=pbx000001) exten => 101,n,Dial(SIP/pozitel/37129238254,45,t) exten => 102,1,Dial(SIP/12345,60) so, when user calls ext

Hi list! I have this configuration for sending T38 faxes to my T38 fax termination provider: T38modem --> hylafax --> Asterisk-SIP-Extension --> T38 termination provider --> T.30 termination to PSTN We are experiencing 2 problems with this (if you want configuration files, it won't be a problem, just tell me): 1. T38 termination provider receives faxes at 2400 bpps from our

[18884732963 at from-fax-machine:... - your call is hitting the from-fax-machine context - yet your 'fax' exten is in the from-pstn-4 context. See the "[2011-03-17 13:40:29.6] NOTICE[8825] chan_dahdi.c: Fax detected, but no fax extension" line. When Asterisk detects an incoming fax tone - it tries to automagically route the call to the 'fax' extension in the SAME

Hello everyone, I am facing a strange problem on my asterisk box (using isdn lines with pri card installed on it). Normal incoming/outgoing calls are working perfectly fine. When a user dial a wrong/out-of-service number they don't hear back any such message like "The number is wrong or user is switched off" in some cases, and it's just a silence for the user. Now while

Aloha, I'm finishing up the final touches on this install, and have run into an odd problem. I can't seem to get Caller ID on the analog phone lines working. It's a Digium AEX 410 card. I have Verbose set and a line to print the CID: I have usecallerid=yes and callerid=asreceived set in both chan_dahdi.conf and users.conf [analog] include=>default exten =>

7. Take an Asterisk training course and become a dCAP. As for "we have try to solve it but we're lack of asterisk knowledge" - would you get a plumber to service your car? Why not employ (as in 'pay money') somebody to investigate this further. As Satish pointed out - QoS type issues take a lot of debugging and that usually has to be done on-site. BTW - I doubt any of

Thanks I had this line in my /etc/asterisk/chan_dahdi.conf : include=/etc/asterisk/dahdi-channels.conf the file /etc/asterisk/dahdi-channels.conf was generated by /usr/sbin/dahdi_genconf I simply did that : cat /etc/asterisk/dahdi-channels.conf >> /etc/asterisk/chan_dahdi.conf It works now. May be the option "include" is not supported within the file chan_dahdi.conf

Calling from my home using Asterisk 1.6.2.1 to an office extension (Asterisk 1.6.1.13) the callerid is not honored: Home: -- Starting simple switch on 'DAHDI/1-1' -- Executing [170 at internal:1] Answer("DAHDI/1-1", "") in new stack -- Executing [170 at internal:2] NoOp("DAHDI/1-1", "Context: office-extensions") in new stack

So, tweaking configs, rebuilding this and that... restarting, twiddling, it works (yeah!), but fails on re-boot to work at all. Consistently, though. I believe it comes down to this: I can call out only *after* I've received a call. So, cold boot. Then: modprobe dahdi modprobe wctc4xxp modprobe wcfxo dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.3

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

One of our client facing this issue, we have try to solve it but we're lack of asterisk knowledge. Anybody can help us? Isn't any problem with asterisk configuration or the problem come from PRI E1 itself? [Apr 11 15:32:48] VERBOSE[9231] chan_dahdi.c: -- Requested transfer capability: 0x00 - SPEECH [Apr 11 15:32:48] DEBUG[6888] channel.c: Avoiding initial deadlock for channel

I am having a problem setting the caller ID that shows when I make an outbound call over my PRI line. If I make a call from a SIP phone registered with the Asterisk box the PRI is connected to the correct ID shows on my cell phone. If I make a call from an IAX trunk connected asterisk box calling the same number as call one and setting the caller ID to the same number as call one the caller ID

Alright I've been having an issue when trying to dial out locally when coming from SIP. This used to work no problem, now it doesn't. Now the local PRI to Bell Is working fine I have calls coming in and out of it constantly right now. BUT if I try and make a local call from SIP (from X-Lite or one of our Linksys SPA2102s) It fails every time with errors like these == Using SIP RTP

Hi, I have a Junghanns QuadBri installed and seems to be detected and working correctly using the wcb4xxp driver All ports are configured as TE The problem is when I connect an ISDN line - the LED turns green and Dahdi status shows Alarm OK But when I try to make a call I get "All circuits are busy" cause 27 I have searched and web and tried numerous configs but it doesn't want to

Dear, i using this scenario. jitsi---> asterisk---->EPABX------> Local Telephone when i am calling from jitsi to no 88 its giving this message and getting busy tone. == Using SIP RTP CoS mark 5 -- Executing [88 at myphones:1] Dial("SIP/sandeep-00000004", "DAHDI/g0/88,20,rt") in new stack -- Called g0/88 [Nov 15 09:53:54] WARNING[3169]: chan_dahdi.c:7536

Hi! I have an analog line connected to my asterisk and when I try to answer a call I get this -- Starting simple switch on 'DAHDI/7-1' -- Executing [s at from-pstn:1] Answer("DAHDI/7-1", "") in new stack -- Executing [s at from-pstn:2] Playback("DAHDI/7-1", "vm-intro") in new stack -- <DAHDI/7-1> Playing 'vm-intro' (language

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Making some changes in extensions.conf to test the incoming calls so that these are derived to a SIP extension, I found something that draws attention to me: if I test calling to my PSTN line from a mobile phone, when take the call from the SIP extension (softphone), if the mobile phone releases the call, sofphone do it too without problems,