similar to: grandstream and jitter buffer

We have a customer on a wireless connection that has very bad jitter. They can hear people fine, but people have a very hard time hearing them. They are connected via a SPA-2102. It is a SIP client going to a SIP trunk. Something like this in sip.conf [general] would be in effect for all SIP clients: jbenable = yes jbmaxsize = 150 jbresyncthreshold = 1000 jbimpl = fixed jblog = yes I only want

Hi, I have a SIP client which is registered to asterisk. Asterisk is registered to a SIP trunk and also handles the media. Now since my client has some issues in its RTP Tx, which seems to have some amount of jitter (mean jitter as per ethereal trace is about 17ms, max jitter is 20 ms and max delta is 85 ms), to over come that I have enabled jitter buffer in the SIP channel by setting sip.conf

Hi Guys I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes

4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest

Hi, do you have NAT between Asterisk and agent phones? S pozdravem Tomáš Holý Hi Tomas Thanks for replying. Yes, the phones are in one location in a LAN and are then NATed to enable them to contact the Asterisk which is hosted in the cloud. A typical sip.conf phone configuration on the remote server for the site is [general] session-timers=refuse disallow=all allow=g729:20 allow=ulaw

Hi, Asterisk 1.4 Working (jitter buffers created as expected): ZAP -> SIP SIP -> ZAP Not working (no jitter buffers created): SIP -> chan_local (with /nj) -> ZAP SIP -> chan_local (with /j) -> ZAP SIP -> chan_local (with no flags) -> ZAP I have this in zapata.conf: jbenable=yes jbforce=no jbimpl=fixed jbmaxsize=300 Is there something I haven't tried that will make

I'm assuming asterisk does not have a SIP jitter buffer in place? Any ideas on how to help with this going over a data T1 where VoIP is shared with regular traffic? Problem is when people are downloading the voice is jittery, even lossy. Matt

Hi guys, I'm trying to move away from meetme to loose the dependency on dahdi. ConfBridge seems to be a good fit but I can't get it going. The document sounds like an easy to use app. Am I missing any bridge_ modules? Asterisk 1.6.2.0~rc2-0ubuntu1.2 -- Executing [521 at outbound:1] Answer("SIP/109-b877a8c8", "") in new stack -- Executing [521 at

hello every one, i have an asterisk system and want to act as gateway and send calls to cisco gatekeeper. this is my h323.conf file: [general] port=1720 binaddr=192.168.0.YY context=from-trunk faststart=yes h245tunneling=yes gatekeeper=192.168.0.XX //cisco address progress_setup=8 progress_alert=8 dtmfmode=rfc2833 jbenable=yes jbforce=no jbmaxsize=200 jbresyncthreshold=1000 jbimpl=fixed jblog=no

Hi all, I'm fighting with a really strange problem that is really busting me. I have an asterisk 1.4.22 ( from a trixbox 2.6.2 ) and mISDN 1.1.7 3 extension on hardphone and 3 extension in softphone ( zoiper ) What happens is that sometimes the people on the other side of communication hear my voice as metallic and chopped. This happen either on incoming call than on outgoing call. If I

> I have a 4 port PRI card that I need to setup each port in their own group. > > In chan_dahdi.conf I have the following which works for one port > > How do I add the rest of the ports in their own groups so that I can have different signaling > on each? > > [channels] > > language=en > > switchtype=euroisdn > > pridialplan=unknown > >

Hi, I have been testing asterisk 1.4 with a view to deploying it in my organisation and I am experiencing jittery voice prompts from the voice mail system. I get this jitter even if I try a simple "hello world" dial plan. I have tried the release of 1.4 and also 1.4 svn and both display this issue. I have also tried it on a dedicated linux box and on a linux install running under

Hi All; Can I run the IAX on TCP port instead of UDP port? If I ran IAX in TCP port, and in case my network was having a lot of users doing browse on the internet and downloading, so in that case and if the IAX used TCP port, so the voice will be better than using UDP (because in TCP the lost packets will be resend while in TCP it will not which will cause the voice to be cutting)? Same thing

> > 1. Do I need to activate jbenable in sip.conf? Or is it enough to call > > the JITTERBUFFER function? > > You only need to use the JITTERBUFFER function. > > The jbenable option will enable a jitter buffer on every channel > created for that peer (or, if global, for every peer in the system). > Depending on the version of Asterisk, it will also place the

We have two Linksys 942 phones which sound great when they call each other directly through Asterisk. But when they both dial in to a meetme conference room, the sound is very jittery. Other phones like Polycom 501 and Snom 360 sound fine when using meetme. Both Linksys phones are set to use the default g711u (ulaw) codecs. Adjusting the jitter buffer and jitter level settings to various values

Am 23.06.2020 16:22, schrieb Marek Greško: > It seems your problems lie in something other. Most probably it is not > mtu problem. All my suspections are contradicted. If it is true you > have inter vlan voice quality problems, it is definitely something > different. Formerly I assumed you were trying only LTE vs LAN using > internet. I'm not sure what you mean with the last

Hello, For the moment I have the following settings in my sip.conf. I want to optimize them to archive the following things: - for the moment all my users will re-register too often. I want that only lagged users to re-register quickly. - check from time to time all users but no too often to see if is logged and can be called. Overall i want only lagged users to reregister and users with good

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

Hello all, We've been using our Asterisk system live for about a month now and I'm looking to tuning a few things. First, is echo, I receive a fair amount of echo during the first 10-15 seconds of incoming calls. Next is a very weird problem. We have serveral Polycom IP300's and one Budgetone phone. It seems that if we unplug & move the Budgetone (which happens a fair amount

Immediately after running winetricks a month ago, several very important directories disappeared from my hard drive, and despite paying a lot of money to good data recovery company, I have not been able to recover them. I have searched this forum and elsewhere for evidence of this happening to anyone else with no result. Is it at all possible that the script deleted my directories by accident