similar to: Echo and static on PRI with errors

Hi there, I'm having some fairly serious asterisk problems, which seem to be spread quite liberally across all asterisk versions, I've tried 1.4.2, 1.6.0.10, 1.6.2beta4 and still had exactly the same problem with static and echo on the line when using the PRI interface. A little background: Server: HP DL145 G3 Dual Opteron 246 with 2GB ram and a brand new OpenVox D110P

I am having a problem with and Asterisk installation where two ports connected to a TDM400 card will have a very loud noise when you try to dial. The server has an OpenVox D110P, a TDM04B and a Xorcom Astribank 8 fxs. It is running Zaptel 1.4.11 and Asterisk 1.4.18. The problem always happens with two ports (34 and 35) which are connected to two GSM gateways. They will work fine for a week

Hi, I have problem using Asterisk.I have isdn-pri and openvox d110p card in my computer.They are connected with RJ-45 (1,2,4,5 pins to the card and all pins to the isdn done by telco workers). I got green led on isdn which is sign that isdn is working and that is connected to openvox, right ? I compiled newest versions of libpri zaptel and asterisk and had no problems during that. When I started

Hi all, So I'm trying to work on this complex fax server setup, and part of it involves connecting my asterisk server to my Rolm CBX switch, via a T1 line. I plan on using Asterisk simply as a T1-PRI Bridge to IAXmodem (which in turn, activates HylaFax+ to handle the faxing). So far, though, I don't think I'm getting 100% of the way there. When dialing the fax extension from my

Hi guys, I've been trying to get my ISDN-10 line up for the past few days, but its been going up and down. I am using OpenVox D110P card on asterisk version 1.4.21. It seems to me like a cable problem. I tried using Ethernet straight cable (12, 45, 36, 78) and also a "straight" cable where the twisted pairs are on 12, 34, 56 and 78. The problem remains the same.

I fit the model fit<-lm(thresh~cond*Ne) where thresh is the reponse cond is a factor with levels a, b, and c Ne is a continuous indep var I think of this full model as having three lines: thresh as a function of Ne for each condition. Thus we have slopea, slopeb, slopec, inta, intb, intc. lm output my params ------------------------- (Intercept) inta condb intb - inta condc

Hola, mi pregunta es la siguiente: Tengo un modelo genético aditivo, donde los individuos estan emparentados. Quiero que la matriz de parentesco sea la matriz de coeficientes de las correlaciones entre genotipos. En SAS, con PROC MIxed podia agregarla como un archivo y usarla en la sentencia random...No encuentro como hacerlo en R, alguna idea?? En resumen, puedo imponerle a los efectos

Hey Everyone, I would like to start testing/playing with PRI channels but I don't have access to a PRI line. Is it possible to do the equivilent of a crossover between two PRI Cards (say Digium's TE120P)? What I was thinking is that I could set one asterisk box up with a PRI card set as the TE and provide clocking and another box exactly the same but with the card setup as NT. I think

> > Hola, a todos! Estoy ajustando un modelo componentes de varianza utilizando el paquete lme4, quiero extraer luego los valores estimados de varianza de cada factor aleatorio de este objeto lmer y guardarlo en un vector. Existe la función VarCorr, Esto es lo que hago: Mi ejemplo: tengo 3 factores NDVIaño; Máx.IH; TV # Ajusto el modelos lmer(peligro100 ~ 1 + (1|NDVIaño) + (1|Máx.IH) +

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

Dear list, I'm having trouble to see how my elements on a 4 dimensional array are listed. For example, I generated the following array: junk.melt=melt(occ.data,id.var=c("Especie", "Site", "Rep", "Año"), measure.var="Pres") y=cast(junk.melt, Site ~ Rep ~ Especie ~ Año) Now, I want to be able to look at how my species (Especie) are listed, in

Hola todos: acabo de actualizar R a R 2.10.1, y cuando actualice Rcmdr (Versión 1.5-4) me cargo la versión en inglés, no me acuerdo que hice antes para tener Rcmdr en español (trabajo con windows XP). alguien podría recordarme lo que hay que hacer? Gracias Gabriela. ______________________________ Lic. María Gabriela Cendoya Magíster en

Hola, ¿qué tal? Juanjo Gibaja y yo hemos organizado un curso de R básico, no presencial, colaborativo y gratuito dirigido a aquellas personas que quieren introducirse en el mundo de R. Para más información, pueden consultarse los dos siguientes enlaces: http://www.datanalytics.com/blog/2012/06/01/curso-de-r-gratuito-no-presencial/

Estimados me ha surgido una duda con un simple stem and leaf el mismo es el siguiente: > stem.leaf(Datos$ej1.21) 1 | 2: represents 0.12 leaf unit: 0.01 n: 40 LO: 0.72 0.85 3 10 | 9 11 | 4 12 | 4 5 13 | 7 7 14 | 710 (*) 9 15 | 18 16 16 | 3447899 (6) 17 | 045599 (***) 18 18 | 2568 14 19 | 23710 (**) 10 20 | 389 7 21

Hi Jan Beulich, > changeset 15414: 3cf5052ba5e5 x86: machine check exception handling With the c/s, when creating HVM guest, I can only see a white Qemu window. :( Can you have a look? Thanks. PS: the serial log follows: (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f2000000 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 03:0 bar 14 size 01000000:

Nuevamente necesito ayuda, parece que en lugar de aprender ¿desaprendo? Es un problema sencillo, cosas que uno ya hacía y ahora por arte de magia no salen. Se trata sobre apply (esta vez no intente con programación). La intención es crear una columna en el data.frame donde coloco palabras o NA, de acuerdo a una columna donde está todo codificado. Posiblemente se entiende mejor copiando y pegando

Hello Team I have installed the new DL580 and used the new TE420B to add capacity on our ivr. Before I put new E1?s I decided to first move the old e1 from the old system to this new one but it has errors which not only affect the audio quality, but also cause the asterisk to refuse any call after sometime even though the channels seems up and active {seems d-channel fails}.. When processing

Hola a todos, quisiera saber como hacer para cambiar la escala del eje x, por ejemplo en un gráfico de puntos. Saludos _________________________________________________________________ Windows Live Messenger GRATIS: lo que faltaba en tu BlackBerry http://www.messengerentublackberry.com?ocid=WL_BB_LandPage_TagLine [[alternative HTML version deleted]]

it just says /usr/sbin/swat.new Aborted when i run it from the command line. nothing i can see in the logs... The swat binary from a 2 week old head now (with the rest of the installation from today's head) seems to work okay. what's going on with swat - did i screw up the build? Are others also having problems? (nothing in the marc) brad

Estimados Disculpen la ignorancia, probablemente ya lo hayan respondido, pero al actualizar mi versiòn del programa y querer abrir un workspace creado con la versiòn anterior 2.11.1, indica el siguiente error. No es posible cargar el entorno de trabajo creado Gracias por su ayuda, Alejandro -- tel +54-+2944-422731 int 228 fax +54-+2944-424991 correo electrónico almarti en