similar to: help setting tone zone

Hi, I'm not sure if I just missed something somewhere along the way, but I noticed while I was going through the CVS logs that there is an option in the wcfxs module to set an "opermode" - which apparently might help with echo issues around the globe (like the ones I'm seeing - some times). So I'd love to use it and give it a go. Apparently, there are some options that

Hi All; If I need to set the opermode to King Saudi Arabia, what the name I have to use? For example, to set it for kuwait then I use opermode=KUWAIT. So what will be for Saudi Arabia? Any advise? Regards Bilal

Hello The Ubuntu Asterisk package doesn't install /etc/modprobe.d/dahdi.conf, so I was wondering where to put the following line: ======= options wctdm opermode=FRANCE ======= Should it be in /etc/dahdi/modules? ======= options wctdm opermode=FRANCE ======= Thank you.

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex

Hi list, I installed 2 HB8 cards each of them with a Quad Bri modules in a HP 360 G6 running Debian Squeeze. Here is an output of dmesg wafter server has booted: [ 9.784123] wctdm24xxp 0000:0b:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 11.847073] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex [ 11.847600] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [

Hi, I'm facing an issue with which loading wctdm24xxp module fails. Here is relevant dmesg's output : [ 13.455729] dahdi: Telephony Interface Registered on major 196 [ 13.455729] dahdi: Version: 2.4.0 [ 13.510847] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.527788] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 17.527787]

Hi I am having some problem forcing my tdm410 to alaw over ulaw, I have 1.6.1.0 asterisk (debian i486) dahdi 1:2.2.0 built with the hardware echo canceller firmware /etc/asterisk/chan_dahdi.conf alaw=1-4 but I have this in the general section, before any channel definition dahdi show channel 1 Default law: ulaw even when i have a call going it is still ulaw Thanks Alex

Hi, Has anyone in australia got asterisk running on FreeBSD? how would i pass the opermode=AUSTRALIA parameter to the wcfxs.ko module as kldload doesnt let you pass parameters to the module like modprobe in Linux. I tried to get the sysctl variable using sysctl -a it might use but nothing applicable was visible.... i need to set the impedences to 600 ohms, can someone please advice me on

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at

Hi, 1. Is there any manual entry about modprobe's options relative to a given Dahdi driver (wctdm24xxp, for instance) ? 2. When loading a wctdm24xxp driver, is there any parameter to pass to modprobe to configure a span in NT/point to point mode ? 3. After running dahdi_cfg -vvvvv , I can read with dmesg : [ 1986.289277] wctdm24xxp 0000:04:06.0: xhfc: Configuring port 0 span 1 in TE mode

Hi, sorry for my insistence but this is a big problem for me..my steps for remove card are ok ? Thanks. ------ Salvatore. ----- Original Message ----- From: "Sasa" <sasa at shoponweb.it> To: <asterisk-users at lists.digium.com> Sent: Monday, November 26, 2007 4:25 PM Subject: [asterisk-users] Remove a TDM Card > Hi, I would like remove a Digium TDM2400P from

Hi. Please help. When trying to compile Zaptel 1.4.5.1 I get the following: /build/include/linux/modversions.h -DSTANDALONE_ZAPATA -I.. -o base.o -c base.c base.c:48:29: linux/workqueue.h: No such file or directory base.c:292: warning: `vpm150m_firmware' defined but not used make[2]: *** [base.o] Error 1 make[2]: Leaving directory `/usr/src/zaptel-1.4.5.1/wctdm24xxp' make[1]: ***

Hi, Before I report a bug on http://bugs.digium.com, I would like to know if someone is seeing the same error message. Personally I am not using wctdm24xxp but other modules such as wcte12xp and wctdm. The latter modules load fine and are compiled with pci_register_driver as expected. The only module that seems to require the deprecated function pci_module_init is wctdm24xxp. Is this normal?

I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp i get this error FATAL: Module wctdm24xxp not found. FATAL: Error running install command for wctdm24xxp I think i have successfully compiled the zaptel drivers, and the card appears when i do a lspci 02:06.0 Ethernet controller: Digium, Inc. Unknown device 0800 (rev 11) Subsystem: Digium, Inc. Unknown

Hi, I'm running FC3 with kernel 2.6.11. All the binary files and zaptel kernel modules is not available to system at boot time. They are extracted in a ram disk at system startup and then zaptel modules are loaded manually and so on. I have no problem with this boot routine and i've been tested all digium cards (expect tdm24) and they work fine till now. The problem appeared when i

Hi I'm sorry for the my trivial quest. I Have asterisk 1.4 with TDM 400 with FXO and FXS, and works fine from several months. Now I want to connect a device to TDMFXS that want a ring frequecy of 25 hz to activate: i am italian, and usually the ring freq is 20 hz. The other time (I have used that device several times with other asterisk installation) I have modified /etc//modprobe.conf and

When I compile dahdi I see these warnings: WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/wctdm24xxp/wctdm24xxp.ko] undefined! WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/dahdi.ko] undefined! And "modinfo dahdi" shows that the driver was built for a 2.6.17 kernel, SMP mod_unload 586 4KSTACKS gcc-4.1 If I "modprobe -a dahdi", I get

Hello I purchased an AEX800 card to replace the ageing cheap channel bank/T1 card solution a few months ago, assuming that it would be a more robust solution for my small scale phone system. However, it appears to be anything but that. Originally implemented as a XEN dom-u virtual machine on a large server class machine, using PCI passthrough to pass the AEX800 and a small older TDM400, then

Hi All, Running asterisk 11.25.3, the /proc/cpuinfo says Intel(R) Xeon(R) CPU X5675 @ 3.07GHz lsmod | grep dahdi gives dahdi_transcode 16384 1 wctc4xxp dahdi_voicebus 61440 2 wctdm24xxp,wcte12xp dahdi 225280 11 wctdm24xxp,wcfxo,wctdm,dahdi_transcode,oct612x dahdi_voicebus,wcb4xxp,wct1xxp,wct4xxp,wcte11xp,wcte12xp crc_ccitt 16384 2

Have a new TE133 in a dell R320. dahdi_cfg -vvv shows: DAHDI Tools Version - 2.9.1 DAHDI Version: 2.9.1 Echo Canceller(s): Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Clear