similar to: OT - Aastra - mapping transfer key

Hi, I can't find a way to tailor DHCP/TFTP/HTTP environment so that brand new Aastra SIP phones can be auto-provisioned when config files are stored in a specific TFTP subdirectory instead of TFTP root directory. For instance, TFTP root directory is /srv/tftp. When config files are stored in /srv/tftp, a new Aastra can find its config files. When config files are stored in /srv/tftp/aastra,

Hi, I`ve been toying with an Aastra phone (9143i) wondering if it could be a good alternative to to the more expensive Polycom phones. One thing which I can't figure out, although it certainly looks simple, is to update the firmware though FTP (not TFTP). I have set the ftp provisioning server in the Aastra phone, and put the firmware file 9143i.st in the root folder where the

Hi, I'm a Polycom user who have just been trying out the Aastra phones. I`ve run into a bit of an issue. I cannot configure the voicemail dialout correctly on one of the two phones I am using, even if the documentation seems to state that it should work in the same manner on both phones. I have both a 9143i and a 57i CT. I`ve set both up with provisioning from config files. Both

I have two Aastra phones, a 6730 and a 6757, both connected to Asterisk v1.6.2.1. They can call each other's extensions (and make and receive calls otherwise), but they cannot transfer calls, not even to outside extensions on the PSTN. The procedure I use is to accept a call on one phone, press the transfer button, dial the other extension, and then press "transfer" again after the

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

I'm currently testing these phones and so far I'm very pleased with them. I'm using the SIP image (Version: 1.0.0.23 Release: 0032-01-A4). There are a few issues with the speaker not working properly when you dial out or pick a call but this is a known issue and will be hashed out in the next release. I've been working with the developers at Sayson and they have been very

I need to setup MWI on a few Aastra 9112's. I've tried doing so in the web interface by setting "Explicit MWI Subscription" to true, but no lights, no stutter tone. Firmware: 1.4.0.1048 Thanks! -- Warm Regards, Lee

I have 8 aastra phones that are loosing registration. On the phone gui it says 408 as the registation error after a minute or say they register. In the cli it eill say the phone is now unreachable then it will show it registering then available. At first they did it every hour all the phones. After messing with the experation it does it every 15 nin. Any ideas on how to troubleshoot this? I tried

I want to use extension numbers that begin with the # key in my dialplan, but I can't get my Aastra phone (6731i) to transmit the # key to asterisk. It works fine for the * key. I've tried numerous Local Dial Plan patterns in the aastra web configuration but none of them worked. My current Local dial Plan pattern is "x+#|xx+*|#x+". Any help would be appreciated. -- Marvin

Hi, What are the main differences between Aastra SIP phones 6730i and 6750i series ? Aastra corporate web site mentions : "The Aastra 6730i Series offers exceptional features and flexibility in an open-standard enterprise grade IP telephone" for one "The Aastra 6750i Series offers features and flexibility in an open-standards based, carrier grade IP telephone." for the

If you own Aastra phones, here's a group dedicated to your specific needs. BTW - The Asterisk-users mailing list is great but it has way too much volume to be useful for specific problems. It needs to be broken up into smaller more manageable lists. Homepage: http://groups.google.com/group/aastra-asterisk-users Group email: aastra-asterisk-users@googlegroups.com

please no body has som with aastra can help me in this issue 2015-03-26 11:02 GMT+00:00 Salaheddine Elharit <salah.elharit200 at gmail.com>: > hello list > > i need your help please regarding an issue with snom300 and aastra6731i > using asterisk > > 11.13.0 asterisk > > snom 300 8.7.3.25 > > astra 6731i 2.6.0.2019 > > i have configured the trunks like

Hello everybody, I'm having issues with calls being dropped on Aastra phones, when the call is on hold. Tested with models 6863i and 6867i. I've figured that the call is dropped by Asterisk when it reaches the rtpholdtimeout limit. I've reported the issue to Aastra, asking them to implement some kind of "RTP keep-alive" feature on their phones. Maybe the phone could send

hello list i need your help please regarding an issue with snom300 and aastra6731i using asterisk 11.13.0 asterisk snom 300 8.7.3.25 astra 6731i 2.6.0.2019 i have configured the trunks like below 100 in snom300 200 in snom300 300 in aastra6731i 400 in x-lite the calls between x-lite and aastra ====ok inbound and outbound the calls between x-lite and snom300====> ok inbound and

> > Allen Casteran wrote: > > Anyone know what the POE draw is for the Aastra 480i phones? > > We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. > > A Cisco 3560 switch will do 15.6 watts on all 24 ports. > > Just trying to find out if we need that much power. > Drew wrote: > According to Aastra tech support, 5 watts

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Hi, I'm currently trying to connect an Aastra 57i to our Asterisk Server. The strange thing is, that altough I have definitely entered the correct IP address of the server, the phone doesn't even attempt to register. Here is the configuration file (local.cfg) of the phone: firmware md5: dee6e938b469e217a87138076f47fe41 boot count: 1 tone set: Germany language 1: German time server1:

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

I've been pulling out my hair all day on this one. If anyone can help, I'd really appreciate it. :-( I've got an Aastra 9133i (with the latest firmware version) and a Cisco 7960 sitting behind a NAT device on my LAN. The Asterisk server is hosted offsite and has a public IP address. I've set up port-forwarding on the firewall for both phones to tunnel the SIP messages initiated