similar to: T38 support

Gentlemen, I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk. 0851711201 and 0851711290 is on our WAN, no NAT. 0197673581 is outside our WAN and needs to be NAT'ed. Sending a fax from 0851711201 to 0851711290, no problem, switches to T38 and fax goes through. Sending a from 0197673581 to 0851711201, no problem as long as i dont enable T38 on 0197673581. But, if i enable T38

Hi All, I have 1.4.9.1 setup, with the compiler flags enabled for T38, and have a Mediatrix 2102 and a Linksys SPA 8000-G1. I can pass faxes between devices but can't seem to invoke T38 pt UDPTL. It's enabled in sip.conf [general] and well as the [peer]. I get an error at the CLI: WARNING[3096]: chan_sip.c:14149 handle_request_invite: RTP re-invite after T38 session not handled yet !

Hello guys. When I am trying to send fax through T38 to linksys SPA (properly configured etc. - I have tried it with other systems), I'm getting error and fax is not delivered. I'm getting this errors in asterisk.log: WARNING[687] udptl.c: No UDPTL ports remaining ERROR[687] chan_sip.c: UDPTL creation failed WARNING[687] udptl.c: No UDPTL ports remaining then, couple lines down:

Hi, I'm using asterisk 1.2.1. Is there anybody out there who knows what this warning means? *WARNING: chan_sip.c:3470 process_sdp: Unknown SDP media type in offer: image 5004 udptl t38* Google does not help at all. TIA Giorgio Incantalupo

Hi, folks. I'm having a heck of a time trying to get outgoing T38 faxing (I don't need inbound right now) working with FFA and Gafachi. G711 faxing works (as well as can be expected over the internet), but I want the higher reliability of T38. I'm running Asterisk 10-beta1. When I drop my callfile in to make the call, I get this: -- Attempting call on SIP/18884732963 at

I have problem with fax machine Panasonic DX600. It's connected to Grandstream Handy Tone 386 which is connected to Asterisk. Asterisk is connected to my SIP provider. To some numbers I can't send FAX, and I get following error on CLI. WARNING[2237] chan_sip.c: Unknown SDP media type in offer: image 31358 udptl t38 I believe that Panasonic DX600 machine supports T38. And when I have

On Fri, Jun 16, 2017, at 10:49 AM, Michael Maier wrote: <snip> > > t38modem and asterisk are using > > m=image 35622 udptl t38 > ^^^^^ > > Provider uses > > m=image 35622 UDPTL t38 > ^^^^^ > > Could this be a problem? If I'm sending internal only, it's always > lowercase. Looking at the tests we have we

Anyone have any testing experience with T38 and HT-502 Grandstream? I just want to confirm that t.38 is working on this device. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110801/fea18d8c/attachment.htm>

Hello, I have a problem with movistar in Mexico with a sip calls. Movistar send to me T38 and G729 in the INVITE and they say that I have to ignore T38 and use G729 in the voice call. When a fax call is made Movistar send only T38 in the INVITE. Invite example: v=0 o=GDL-BMSW-12D 19913379 19899826 IN IP4 192.168.1.2 s=sip call c=IN IP4 192.168.1.2 t=0 0 m=audio 6370 RTP/AVP 18 101 a=fmtp:18

Hi, I configured Asterisk 10 for inbound fax, for couple of weeks I didn't see any issues until today. The setup I configured for inbound fax is quite simple i.e. Cisco Voice GW sends the fax calls to Asterisk using T.38 protocol and later Asterisk stores/forwards the fax to specific end user. The configuration I made in sip.conf for enabling T38 is listed below; t38pt_udptl =

The scenario we have is fax send/recieve software that ONLY talks T38 and an asterisk box. We have ITSP providers that do NOT talk T38 but G711 only. Does asterisk have the capability to take the T38 call from an ATA or T38 software then bridge/transcode it and do G711 out to the PSTN providers? If not is there another product PAID or FREE software or hardware that can do this easily and

Hi Guys, Something I have noticed while dealing with T.38 and re-invites in Asterisk 1.4.22. I have a provider who re-invites with the following sdp (message flow PROVIDER_EQPMT -> ASTERISK): """ . v=0. o=SIP_5F9 123456 654322 IN IP4 CONN_IP_PROVIDER. s=-. c=IN IP4 CONN_IP_PROVIDER. t=0 0. m=audio 0 RTP/AVP 0. m=image 26858 udptl t38. a=T38FaxMaxBuffer:288.

Hi, I'm trying to send faxes using Asterisk 1.4 and T38 with sip but Asterisk rejects the t38. Anybody know if is possible to transmit t38 fax with Asterisk 1.4? following settings: --- sip.conf --- [general] bindport=5060 bindaddr=0.0.0.0 disallow=all allow=ulaw allow=alaw context=from-outside t38pt_udptl=yes [operator] qualify=no nat=yes host=189.160.126.201 dtmfmode=rfc2833

Dear list, I've got the following setup : [FAX-ATA]--[PBX LAN]--[Firewall]--[PBX WAN]-----[upstream SIP] On the PBX's we run Asterisk 1.4.33 with t38pt_udptl=yes in [general]. The FAX ATA is a Teles VoIPBox with T.38 support (that works). On the PBX WAN, i see the following in udptl debug : Sent UDPTL packet to 172.16.0.156:4460 (type 0, seq 184, len 32) Got UDPTL packet from

Hi all, I have a question regarding using T38 for fax sending and here is my scenario: fax -> SIP ATA (T38 enabled) -> Asterisk #1 -> IAX TRUNK -> Asterisk #2 -> SIP ATA (T38 enabled) -> fax My question is, how can I know if I'm really using T38? is T38 information coming to the other side (because of SIP to IAX conversion) or just plain g711a data? I'm using Linksys

Hi My call flow is T38 static IP gateway --> Asterisk --> Sip Provider--> PSTN Call is placed in reverse direction - from PSTN to T38 Gateway. T38 GW reinvites with T38, and asterisk passes it along to the SIP provider. The SIP provider challenges it and asterisk reponds to the Challenge with INVITE with Auth credentials...however, the Asterisk changes the SDP and replaces the T38

This is one long letter about T.38 and Asterisk. I hope it will help me, and lots of other Asterisk users to understand some T.38 problems with Asterisk. This is my situation: I have Panasonic DX600 FAX machine. It's connected to Asterisk 1.2.13 thru ATA adapter (I have used both, Cisco 186 and Grandstream HandyTone 386). Asterisk is connected with my SIP provider. That link that my provider

Hello List, I think I've discovered a little bug in t.38 bug in 1.6.0.22 regarding the speed (T38MaxBitRate) used to send the faxes. Asterisk always responds with a=T38MaxBitRate:2400. I've tried with Patton and Grandstream devices and the result is always the same. Patton ignores the parameter and sends the fax at 9600.

Hello, I need help to solve a problem that I am having using Asterisk 13, PJSIP and T38. My setup is as follows: SIP Provider --> Asterisk 13 --> Patton --> Physical Fax I need to get the fax directly in T38 to Patton. The provider sends me the fax in T38. If I receive the T38 fax on Asterisk (using an hylafax device), I can properly receive the fax. If I send a T38 fax with Asterisk

Dear all, I'm trying to enable Asterisk to work with FAX using T38. I've tried Asterisk 1.2.4 with the available patch found at URL http://bugs.digium.com/view.php?id=5090 and also with the new 1.4 Beta3 that is announced to support it too. With both Asterisk versions, I've sent with success FAXes between two FAX machines each one attached to an ATA interface, both registered in