similar to: PSTN Interface Card

Hi Which is the best interface card to connect PSTN line with Asterisk. Can somebody please help. My intention is to route the incoming PSTN calls to internal IP Phones through Asterisk and Vice versa. The Asterisk is in LAN and is reachable from all the IP phones in the LAN. Thanks Manoj -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi guys, I'm trying to write hangup causes from asterisk into the CDR record. Using version 1.4.24.1 at the moment, but no joy so far. Has anyone implemented this? Neeraj Chand Support Analyst Fiji Islands Australia T: +6793342526 T: +61388924326 M:+6799344012 New Zealand www.ocis.com.au T: +649 980 7022 -----Original Message----- From: asterisk-users-bounces at

Hi Jon, perfect instructions, thank you very much. I used them and after some tests they worked. Here is what I did. Maybe someone could use it completely: ------------------------------------------------------------ Install helpers: apt-get install kernel-package ncurses-dev fakeroot wget bzip2 Go to usr directory: cd /usr/src wget

Hi, Bristuff works great with HFC card... your compilation problem may come from your kernel configuration... You should check this doc, at least, for the redhat config : http://www.automated.it/guidetoasterisk.htm Then, installation of Bristuff works like as charm ! Bye David Masure -----Message d'origine----- De : vdasilva [mailto:aquamoon@wol.co.za] Envoy? : mardi 28 juin 2005 09:01

Hello I have asterisk running in Red Hat 9 with a cheap HFC card on i4l. I have choppy sound problems sometimes, and echo problems often. I am using a 2 port Grandstream ATA, Grandstream BT and a Grandstream GPX-2000 I read that changing to BriStuff will fix the echo problems, but have also read other users say that the only way they solved the echo/choppy sound problems was using a Fritz ISDN

Hi all, I've been working with * for a long time now, but only with analog FXS/FXO systems. I am venturing towards setting up a box in Germany now and I believe that requires a Fritz card? Do I even have to use the Fritz cards? Why not a Digium card.... We have 2 ISDN lines ( --> 6 handsets) so I'm guessing that will require 2 Fritz PCI cards (they have 1 port only). Then

Hi, I have installed Asterisk 1.4 with mISDN with the install-asterisk.tar.gz script from beronet.com. On my system I have two cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to work well with mISDN on my system from a previous installation. Now however, the AVM card works well at first glance, i.e. it "registers" incoming calls and works through the asterisk

> uname -a Linux pbx 2.6.15-1-686 #2 Mon Mar 6 15:27:08 UTC 2006 i686 GNU/Linux I'm using the 2.6.15-1-686 kernel package from debian testing. mISDN was installed using the latest CVS sources. Regards, Chris --- From: "MBIT Technologies" <mail@mbit.com.au> Subject: RE: [Asterisk-Users] Asterisk, mISDN and a Fritz card -- kernel crashes To: "'Asterisk Users

Hi list, i'm keen to move to Asterisk 1.6, so really need to update my system which is running Mandrake 9.2 although it has been solid for years, fo Fedora 8. I have a Fritz! card for ISDN BRI, I have installed the drivers/kernel drivers from ATrpms (http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm)

Hi all, I tried to compile the theora source with VS2005. But it asked for the ogg library. error message is as follow. **************************************************************************** Error 1 fatal error C1083: Cannot open include file: 'ogg/ogg.h': No such file or directory c:\Documents and Settings\Manoj\Desktop\libtheora-1.0beta3\include\theora\codec.h 64 Error

Hi, I am having a problem with (Asterisk is crashing) with a Fritz card PCI / chan_capi. Receiving Calls from PSTN works, but outbound calls make asterisk crash (Speicherzugriffsfehler/Segmentation fault). The crash occurs upon dialing with the other phone not even ringing. I hereby ask if somebody reading this list can confirm or disprove my issue. Does anbody run a recent asterisk 2.6 with

Hello everyone! Has anyone had success in configuring the "Fritz!Card DSL" card, a combination of an ISDN adapter and a DSL modem from the german AVM GmbH (http://www.avm.de/) in a dom0 Domain (Xen 2.0.7)? I had success in compiling the modules from http://www.avm.de/de/Download/index.php3 and they load fine with "modprobe fcdsl". But with the Xen dom0 Kernel they seem to

Hello, Has anybody installed 2 Fritz pci cards in an asterisk box ? I can't make them work : each card is working fine when installed alone (with chan_capi), but I get a kernel freeze when doing 'insmod' with both cards installed. I am using Mandrake 10.1 with kernel 2.6, so the hack described at http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used (the hack requires

Is case anyone wants to know... The Fritz! USB ISDN box works fine with Asterisk! I'm running CAPI 0.3.0 and love it, because the mini ITX server I have only takes one PCI slot which is now filled with a 4 port Digium card.

Hi, I'm reading that spandsp works only with zaptel channels. What are my options if I want to receive faxes through ISDN Fritz card with Asterisk and possibly forward it as emails ? Regards, Rob.

Hi Everyone, Long time reader, first time poster. FINALLY got my First AVM Fritz Card up and running under Centos 3.4 Installed the second....modified the drivers etc as per the instructions found at the wiki System boots Modprobe capi all good modprobe fcpci all good modprobe f2pci the kernel then goes into Panic If Modprobe f2pci before fcpci the kernel still goes into panic.

Hi, I've been having problems getting Asterisk to work with a fritz card (in ptp mode). We've managed to get everything configured, however, as soon as the call is connected we get "Unhandled message: prim 281 len -22 from addr 1000000, dinfo 0 on this port" I checked, and mISDN_dsp is loaded. Any help would be much appreciated! Regards, Chris Jones // Network Administrator

hello! I'd like to use my asterisk-box on a p2p-line from my alcatel pbx. isdn4linux and capi works fine on a s0-line from the pbx, but i need more then 8 msns, cause i'd like to implement a voice-mail system and an extension to our "old" pbx with voip-phones. had anyone success using isdn4linux on a t0 (p2p) line (of course with an inexpensive passive card like my avm

> > That is possible, how could I check that? > > I can see that IRQ 17 is shared between eth0 and my fritz!card > but I > > don't know if it changes anything: > > Can you try it (or eth0) in a different slot (or change IRQ's in the > BIOS if possible) to see if it makes any difference? That's the > only way > to know for sure, anything else is

Who mentioned fax? :-) Native CAPI isn't an option for us (unfortunately), as our service is a point-to-point service, which the AVM CAPI drivers don't support. We've now got another problem -- we're now able to make calls -- once. The kernel panics as soon as someone terminates a call (and, so it would seem, at various other times too). This has only been occuring since mISDN