similar to: Realtime LDAP passwords

hi, how to add radius support to asterisk 1.4.5? i do make menuselect and i do not see any module or option related to radius, pam, authenticacion or similar. any ideas? thanks

Hello, all. I see there is an "o" option for the Dial() command which reverts to the previous behavior of using the original callerid throughout the call - I suppose more specifically, using the callerid from leg 1 for leg 2 in B2BUA if I understand it correctly. That seems to be highly desirable behavior; I know we are seeing some problems with call history and call forwarding because

Hello all, I am new in asterisk configuration. I want to configure a Radius server to authenticate the sip users of asterisk. I have trying to use the next document: http://www-rocq.inria.fr/who/Philippe.Sultan/Asterisk/asterisk_sip_external_ authentication.html Can you help me? Regards, Sergio -------------- next part -------------- An HTML attachment was scrubbed...

Hello, all. My apologies up front but I must be brain cramping on something very simple. I've tried to pare down my configuration to the absolute minimum for SIP traffic just to understand how it works. My incoming calls are not finding the "s" extension in my dial-plan. I am assuming SIP calls can do this. I am using Asterisk 1.6.1.1 sip.conf has nothing but: [general]

Hello, all. After reading the README, UPGRADE.txt, and a quick tour through google, is it safe to assume to upgrade from 1.6.1.1 to 1.6.1.2, one simply compiles and installs over the old installation being careful to NOT install the sample files? Thanks - John -- John A. Sullivan III Open Source Development Corporation +1 207-985-7880 jsullivan at opensourcedevel.com

We are happily running xen on a server which uses a SATA driver (thank you all you xenists for producing such a great product). However, we are creating a custom kernel for a domU. When we attempt to run mkinitrd we get: No module ata_piix found for kernel 2.6.11.12-xenUIPSec, aborting. This is the SATA driver. In the past (xen 2.0.5), we simply ran make ARCH=xen menuconfig and told it to

Hello, all. After many pages of googling and testing in the lab, I'm still a bit perplexed about how to implement tls protection for the asterisk manager. manager.conf allows one to specify the cert file but one normally must also specify the private key file. If I simply enter the cert file: sslenable=yes sslbindport=5038 sslbindaddr=172.x.x.8 sslcert=/etc/pki/tls/certs/pbxc.pem ; path

Hello, all. I have a user who needs to monitor their voice mail box and the general delivery voice mail box. I defined them in sip.conf as follows: [tkeeley](a10f) mailbox=612 at a10, 610 at a10 However, the MWI does not indicate voice mails for 610 and I keep seeing this error message: ERROR[2549]: app_voicemail.c:1630 messagecount: Couldn't find mailbox 610 in context a10 However,

Hello, all. In our multi-tenant environment, we would like to be able to use the reinvite media redirection within Asterisk for calls within a tenant but not between tenants. We would like inter-tenant calls to be fully proxied by the Asterisk server. I think the answer is, "we can't," but I thought I'd ask anyway. I'd dearly like to remove the substantial traffic

Hello, all. I've been playing with MeetMe and talker optimization seemed like a great idea. I activated it as follows: exten => 201,1,MeetMe(100201,cTo) However, although I can see who is the talker on the CLI pbx01*CLI> meetme list 100201 User #: 01 1001 Denise Dion-Sullivan Channel: SIP/1001-1e1db7c8 (not talking) 00:00:33 User #: 02 1000 John A. Sullivan III

Hello, all. Since implementing an iptables firewall between the Asterisk PBX and several SIP phones, the Asterisk PBX ability to "reinvite" has been broken even when the phones are on the same network (i.e., no firewall between the phones). We've been beating our heads against the wall thinking it was the complex rule set but it appears the issue is ip_conntrack_sip. Before I drop

i have posted this before but was unable to resolve it. i have some new info so i figured i would try again. the trace from bandwidth.com are below. they are telling me that the ip that is bold should be our ip not bandwidth.com. i have changed every setting that i can see and nothing fixes this. Where would i change this at? they cannot tell me. INVITE sip:+185993133333 at 216.82.224.202

Hello, all. I've come across a nasty problem just as we are ready to put our first system into production. During our final testing, we were plagued with several "invalid extension" or "password incorrect" messages when we knew the information entered was correct. Upon investigation, we saw that DTMF signals were occasionally but not consistently duplicated. We might

Hi, I have a simple question (well, at least I think it''s simple!). I have a router, with four Ethernet cards; eth0-eth3. eth0 and eth3 are the ''external'' cards, connecting to my ISPs. eth1 and eth2 are connected to my internal networks. What I want to do is basically filter all the traffic from one card to another, in this configuration: eth1 to eth3 eth2 to eth0

Hello, all. I'm running Asterisk 1.6.1.6 on CentOS 5.3 in a multi-tenant environment with IMAP voice mail storage on Zimbra. One of our clients is having a problem when transferring voice mails from one mailbox to another (option 8 in the standard voice application menu) using their Snom 320 and 360 phones. The end results is the final recipient cannot listen to the voicemail. We also email

Hi Someone may give me an example of followme() application using in a dialplan (including what to configure in followme.conf) ? I use asterisk 1.6.1 so if your example can match to that release it's will be wonderfull. Thank in advance. Harry. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, everyone. No need to read this message. I'm posting for documentation for other poor, ignorant slobs like me who are struggling to pull together the many technologies to make converged networks happen. Hopefully, this will help save someone else the time I spent. I started the below email until I realized I had solved multiple parts of a compound problem but not all at the same time.

Any vitelity customers with pbxinaflash boxes? I'm able to call in-house, but failing to make outbound calls. My assigned server at vitelity is not reachable. I can ping to my ISP OK. Any help appreciated. Such as actually how to make email contact with support at vitelity. They're not responding. Thanks, Tom

Hi all, I'm having trouble with voicemail on my *NOW 1.5/FreePBX box. I have enabled voicemail in the extensions area, and set the default password. However, every time I try to log in with a mailbox and password, I get the message "login incorrect". I've tried changing the voicemail password, and also disabling and re-enabling the voicemail feature. What else can I do to set up

Hi, Did anyone have any experience with CyberData SIP-enabled VoIP Intercom units please? Are they any good? Can you recommend anything better? Thanks, Finku -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090720/b5d2d785/attachment.html