similar to: POS Modems

Hi, If anyone is interested in the low speed modems needed for POS applications (V.22, V.22bis, V.22bisFC and V.29FC) please contact me. I had some spare time while travelling, and finally got the V.22bis code I started a long time ago into a start where its basically functional. I'm now looking for input about exactly what application software expects from these modems, so I can plan

Kelly Lee Myers: > Depending on what you are broadcasting, for 28.8 I would go 16kbps and be > really safe... well, you could consider not broadcasting at all, that would be 0kbps, and would fit my 9,6kbps gsm connection ;) scnr uno > ----- Original Message ----- > From: "John Griffiths" <john@capmon.com> > To: <icecast@xiph.org> > Cc:

Hello: We trying to configure one machine (Compaq Proliant ML760) with 8 disks (72GB each disk) with RAID. We are thinking to use ext3 and LVM in RedHat 7.2 for manage one filesystem with 500GB. This filesystems have to store near off 5.000.000 of files. Is this possible? Could I resize the filesystems/volume to 1TB? what are the ext3 and LVM limits? someone have tested sismilar environment? I

ok so 24kbps for 56k modems... can i go any lower and get the 28 k modems? (still a lot of them about) or will 24 be good enough fo that? At 04:57 PM 4/4/2001 -0700, Jack Moffitt wrote: >> > >> > the bitrate on the mp3's is 128 (great for listening off the HD) >> > >> > whats a good bitrate to encode for streaming audio? >> >> I think this

Hi Jean, First, I would like to thank for the prompt reply. Basically, what I have to do is to run a speex coder/decoder on a Blackfin processor, on top of the microC/OS II kernel. I wish I could use uclinux, since I'm familiar with Linux, but this doesn't depend on me. You said that the assembly code is written for gcc, not for VisualDSP++. Furthermore, in the link you sent me, the

Hi, I''m Adriano from Rome, Italy. I would like to know if is there in project any support for the ViaMichelin API''s. Thank you Regards Adriano Massi -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.mapstraction.com/pipermail/mapstraction-mapstraction.com/attachments/20080825/6eb6dfe1/attachment.htm>

Everyone, I have a centos 5.10 machine set up to be a fax server using hylafax+ with three multitech MT5634ZBA modems. I am still in the testing phase of using this system for production, and during my tests I have detected a problem I have not been able to solve except for unplugging the modem from the usb port and plugging it back into the usb port. In the middle of a fax production of

I'm looking at using a modem to provide caller ID info on my NTL line following the steps in the article posted by Darren Poulson: http://www.22balmoralroad.net/modules.php?name=Sections&op=viewarticle&artid=1 I was wondering if anybody had experience of using any modems (can be pci/isa/external) with an ntl line (in an ex. Cable & Wireless area if it makes a difference) and

On 15-06-15 08:48 PM, Matt Darnell wrote: > In the past we have used Adtran Atlas 550's to break out FXS ports for > devices like modems. The great thing about the 550 is that internally > it is all TDM so there is absolutely zero latency. > > We are able to use ATA's for faxes and analog phones but devices that > use modems, they fail 99.99% of the time when using an

Hello, On Mon, 17 May 2004, Charles-Etienne.Dube wrote: > I did some tests with 2 cable modems, but now it is installed in a production > environment with 4 cable modems. At first, everything seemed to work fine.. > But now I had a couple of users tell me that some web pages were > not available while others were, and it semms to be a masquerading problem > since when I

On Fri, 6 Apr 2001, John Griffiths wrote: > ok so 24kbps for 56k modems... > > can i go any lower and get the 28 k modems? (still a lot of them about) or will 24 be good enough fo that? As others have said, 16kbps should do the trick. Keep in mind though that the quality of the sound will also depend on the sampling rate. MP3 will handle some higher sampling rates higher than some of

Depending on what you are broadcasting, for 28.8 I would go 16kbps and be really safe... Lithium ----- Original Message ----- From: "John Griffiths" <john@capmon.com> To: <icecast@xiph.org> Cc: <icecast@xiph.org> Sent: Thursday, April 05, 2001 3:12 PM Subject: [icecast] bitrate for slow modems > ok so 24kbps for 56k modems... > > can i go any lower and get

In the past we have used Adtran Atlas 550's to break out FXS ports for devices like modems. The great thing about the 550 is that internally it is all TDM so there is absolutely zero latency. We are able to use ATA's for faxes and analog phones but devices that use modems, they fail 99.99% of the time when using an ATA. We tried to migrate to TA908 devices; they have FXS ports built

The configuration I'm building replaces an existing PBX with Asterisk. There are 8 existing modems that people use to call in from the outside to connect to PC(s) on the inside to transfer data, etc. Callers access these modems by calling the main number and then dialing an extension for the modem they want to talk to. What are my options for supporting these modems with Asterisk? Here are

I am running an FC 2 server with Samba 3.0.10. It is serving files and is PDC for several WinXp workstations. There is now a demand to be able to fax from the WinXP workstations, and I'm trying to figure the best way to set up a modem pool on the server and make them available to the workstations. Is that best handled as some kind of resource share through Samba? How would that be

Anybody connecting to on-premise modems by dialing in to Asterisk and using an extension to reach the modem? How? Sipuras, FXO cards, other? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/92ee113a/attachment.htm

Hi: I' have one TDM400P and need configure my linux box like modems. It's posible give my users with PC/modem/windows/diul up line access to internet with my linux/asterisk/tcm400p?? Thanks in advance Edgardo

Genova 12/10/2001 I need samba for aix 4.1.4 . Can your tell me where I can find it ? Tanks Adriano Bolla e-mail adriano.bolla@loran-thera.it -------------- next part -------------- HTML attachment scrubbed and removed

Hi, I think the (small) readme has been accidentally omitted from the tarball. You can get it at http://svn.xiph.org/trunk/speex/README.blackfin Note however that all the assembly is written for gcc, not VisualDSP++. Jean-Marc Le jeudi 29 septembre 2005 ? 21:24 +0000, Adriano Vilela Barbosa a ?crit : > Hi all, > > I'm trying to run speex on the Blackfin processor. I'm not

Which modems are supported by Asterisk for full-duplex (as a VoIP-PSTN gateway) operations? I've tried Asmax Mustang (based on TI RK 56000 chipset) but it's 4-bit only, also tried Zoltrix on Rockwell 56k chipset, hacked a lil' bit chan_modem_aopen (so it chooses 7200Hz instead of 8000), sound was 'understandable' but only one-way :/ .Does anybody has experience in using