similar to: Duplicate DTMF digits

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls

Hi I have been having a rough time getting a Sangoma A200/Remora FXO/ FXS Analog AFT card set up properly. The main issue is that the card has four ports and as far as I can tell Asterisk is only seeing two. On the two that it recognizes the "Green" FXS ports are not green, they just are not lit. The "RED" FXO ports are indeed red, but from what I have read your not

Hello, I have a Sangoma A200 analog card with 2 FXO ports. It's working well with asterisk 1.4.22 and Zaptel. I decided to upgrade to asterisk 1.6/dahdi. I compiled and installed, dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.10 wanpipe-3.4.1 asterisk 1.6.1.1 My analog card is recognized in dahdi_hardware. However, asterisk cannot compile chan_dahdi.so. I've tried passing

Hello, I'm getting a KErnel Pannic every time i restart the server, what could be happening? I just make: "shutdown -r now" and the server gets Kernel Panic. I'have to go on site and press the power button Here you have my sotware versions: Asterisk 1.4.24.1 DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 libpri version: 1.4.10.1 WANPIPE Release: 3.5.4 IS there

[2009-05-27 02:06:16.294] WARNING[6971] chan_dahdi.c: No D-channels available! Using Primary channel 24 as D-channel anyway! [2009-05-27 02:06:16.295] VERBOSE[6971] logger.c: [2009-05-27 02:06:16.295] == Primary D-Channel on span 1 up [2009-05-27 02:06:16.301] ERROR[6971] chan_dahdi.c: !! Got a UA, but i'm in state 7 I noticed the above error many days after this at around 2AM. This

When I restart or reboot I can not dial out. The dial() incorrectly sees dahdi/1 as busy. I call in once from a cell phone, which is successful then I can call out with out issue. Any ideas would be much appreciated. Sangoma B600de asterisk-1.6.0.9 dahdi-linux-2.1.0.4 linux-2.6.28-gentoo-r5 wanpipe-3.3.16 ###chan_dahdi.conf ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

Im getting these messages when making calls from a sip extension/other asterisk peer out my pri. << [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [DAHDI/1-1] << [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [DAHDI/1-1] It happens whenever i send dtmf. I have all of my devices set to inband, be it local peer, or remote asterisk box/peer. I googled for this error and only saw a bug from

Hello all. We have an asterisk system set up, and we are seeing a lot of multiple DTMF digits being read by asterisk. In digging through the archives the only answer I have seen is to put in the statement relaxdtmf=yes in the zapata.conf file. Since we are not using any zapata devices, I have tried to put that statement in my sip.conf file to no avail. Any help would be appreciated as my end

Hello, all. I've come across a nasty problem just as we are ready to put our first system into production. During our final testing, we were plagued with several "invalid extension" or "password incorrect" messages when we knew the information entered was correct. Upon investigation, we saw that DTMF signals were occasionally but not consistently duplicated. We might

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas???

Hi all, My problem boils down to these errors: ... Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time This is triggered by lines in extentions.conf such as: exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W) The system is CentOS v5.2 with Asterisk 1.4.23 (druid-asterisk-1.4.23.1-2), a Sangoma A104

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5). Neither one

Hi, after many issues we finally managed to make our system do outgoing calls with perfect quality. However I cannot detect *any* form of incoming call. when I use an outside phone to call the E1 connected to the sangoma a102, I instantly get a fast busy tone. My /etc/zaptel.conf is: loadzone=us defaultzone=us #Sangoma A102 port 1 [slot:1 bus:4 span: 1] span=1,0,0,ccs,hdb3 bchan=1-15,17-31

Hi list, I'm having problems transferring certain calls made by the attendant between the PSTN and to an internal extension. Although, transfers between the majority of the calls ends successfully. Debugin this, I've found that calls made to certain "numbers" (Telephony Providers), aren't detected as ANSWERED in the CDR, so they are not properly accounted (for billing),

supervision. Verify if for those "numbers" the CO revert the line polarity when callee answer. callprogress=no is a good test too. Jorge Ra??l G??mez C. wrote: > Hi list, > > I'm having problems transferring certain calls made by the attendant > between the PSTN and to an internal extension. Although, transfers > between the majority of the calls ends successfully.

Thanks for replying. It's there, /usr/src/zaptel and it's valid. The script checks for its existence before compiling. The only thing that's unusual about this zaptel is that it is patched to support KB2 echo can. Gavin: Thanks, already cc'd Sangoma support. Hope they are working today! -----Original Message----- From: Eric "ManxPower" Wieling

Sangoma support did something and the driver is there. Rebooting now with the new card. Hold me, I'm scared. -----Original Message----- From: Colin Anderson [mailto:ColinA@landmarkmasterbuilder.com] Sent: Friday, December 22, 2006 10:09 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Sangoma Wanpipe 2.3.4-3 compilation fails un der FC2

LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o Building modules, stage 2. MODPOST *** Warning: "register_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! *** Warning: "unregister_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! CC /root/wanpipe/patches/kdrivers/wanec/wanec.mod.o LD [M]

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup install -d /etc/wanpipe/util/wan_aftup/scripts install: