similar to: how to ignore a ring on a line

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

I am having a issues with adding a analog card to my dell 2800. I already have a t1 card installed and running fine but when I install the analog card asterisk will not start (ztcfg fails). I have determined it is because of a IRQ problem and have decided to get a new server. Can anyone suggest a server grade setup that supports this? I would rather not buy a machine that will be unstable. I

Hi I am seeing this in my syslog [235900.797660] dahdi: Registered tone zone 0 (United States / North America) I am in Australia so I would want to set them to AUS zone I have got this though options wctdm24xxp opermode=AUSTRALIA thanks -- "See, we love -- we love freedom. That's what they didn't understand. They hate things - we love things." - George W. Bush

Hi I have a site that has asterisk install with a tdm410 one port is connected to a pstn that is used as a backup outbound line when/if the internet/voip is unavailable. Currently my dial plan for this line is to ignore it, I just basically do a s,1,noop s,n,wait (60) s,n,hangup what I would like to do is if I call from a certain number be given an option to run some commands or for the

I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO modules. When I plug one PSTN-line into a FXO-port I am able to receive calls on this line and I can also make calls from an internal SIP-phone to the external PSTN-network. Still I am bothered about something that appears on the CLI when I do a reload chan_dahdi.so : asterisk*CLI> reload chan_dahdi.so -- Reloading module

Hi I was wondering if any one has used these cards, I am looking at this as a replacement for the tdm410, I have some issues with installing the tdm410 in a small case because of the power plug being at the end of the board. I am in australia seems like we have a different setup for out fxs voltage, any one in oz using this card ? Thanks Alex -------------- next part -------------- A non-text

My DAHDI phones were broken since a recent power outage (which required a reboot). For some reason the Asterisk or DAHDI configuration is messed up somewhere (probably from an update that was applied before the reboot?). I am using a Digium TDM410 card. At first, nothing worked at all, but I discovered that if I loaded things manually (e.g. modprobe dahdi; modprobe wctdm24xxp, then go into

Quick and dirty question: for the TDM410P I must use the wctdm24xxp driver? Att Vin?cius Fontes Desenvolvimento Canall Tecnologia em Comunica??es Ltda.

Hi I am having some problem forcing my tdm410 to alaw over ulaw, I have 1.6.1.0 asterisk (debian i486) dahdi 1:2.2.0 built with the hardware echo canceller firmware /etc/asterisk/chan_dahdi.conf alaw=1-4 but I have this in the general section, before any channel definition dahdi show channel 1 Default law: ulaw even when i have a call going it is still ulaw Thanks Alex

Hi I was reading this article on installing asterisk 1.6 + debian http://www.howtoforge.com/installing-and-configuring-asterisk-1.6-and-postgresql-to-manage-cdr-and-realtime-config-on-debian and I noticed they suggested to recompile to 1000Hz enable kernel, I currently have a 250Hz stock standard kernel. I am running on a soekris board - amd geode cpu. Is recompiling the kernel to the

Hi I am in the middle of move a small business over from legacy PABX + PSTN lines to VOIP infrastructure. I borrowed a spa9000 to place between the PABX and the PSTN lines. I have had this going for a while (>5 months) and it has been working fine (some issues with echo and other minor things), which is why I am moving to asterisk. I bought a tdm410 with 3 fxo + fxs. The fxs is connected to

Hi I have an account with mynetphone (australia), which gives me two voip (sip) accounts, which i used to have connected to a spa9000. this is behind a firewall, so on the spa9000 I would listen on another port apart from 5060. so on the firewall 5060 would go to voip1 and 5061 to voip2. I moved to asterisk (+tdm410) and the machine was also the firewall and I had no problem - well atleast it

Hi I am in the process of move a company from pstn to an asterisk setup. They had 2 pstn lines - only really needed a max of 2 previously. Now I have installed a tdm410 to handle the cross over from pabx to voip handset. this has been done, the tdm is now just used to provide a backup pstn line - only used as a last resort for outgoing calls - as its shared with a fax line. I use 2 voip

Hi, I have a custom agi which at times does not exit gracefull and crashes in between. The logging options are set to the maximum but I dont see something conclusive in the asterisk log. I have noticed it crash after issuing the "SAY NUMBER" and "GET DATA" agi commands and the agi is spawned with no apparent reason after that. I tried running the application locally and

Hi I am trying to setup asterisk at home, I have 1 in bound VSP (I have a register cmd setup for that in asterisk). At home I have a cordless phone with 2 line capability - I currently have 2 spa3102's in place to handle the 2 lines ( I am in the process of buying tdm410 to handle to handle this and the backup pstn line). I also have 2 laptops setup with soft sip phones. What I would like

Hi I had a working system, until recently - its asterisk 1.6.1 from debian - not the lastest as the last doesn't seem to work. but somebody who rang me said my voice mail announcement was all stuttery. so i dialed my voicemail box and its really stuttery... so I have done a reboot and its just as bad, now I am not sure what to check to try and get this working again ..... Alex

Hello, I am working on a trixbox based system with a TDM410P connected to 3 phone lines from the CO. The asterisk box is on a full duplex 100Mb LAN with some polycom and Aastra SIP phones. In general everything works. the problem I am trying to solve is that if both parties to a call speak at the same time one of the voices gets cut out such that the talker A cannot hear what talker B is

Hi List, I was thinking the other day that even with T.38 there are still some issues with faxing. I was thinking of a protocol that instead of just sending down the fax tones an ATA or "VOIP fax machine" would get the entire fax convert it into some sort of image and pass it down the line to the receiving end. I got the idea from RFC2833. Yes I know that fax machines send bit by bit and

Hi everyone! I have a Digium Card TDM410 But, it appear for me this massege chan_dahdi.c:8061 handle_alarms: Detected alarm on channel 3: Red Alarm But my line is ok! But sometimes it back sig_analog.c:3807 analog_handle_init_event: Alarm cleared on channel 2 But it again back to red alarm. What can be happen? My lines is all ok! But when I put on Digium Card TDM410 is very inconsistent