similar to: Problem with Asterisk 1.4 and Linksys Spa941/962

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hi I have a big problems on my Asterisk systems : I have one Asterisk Server with static IP (no nat) and 6 Linksys SPA941. All SPA are after a router with NAT: * SPA-1 and SPA-2 are on the same network, we have a pat 5060 => SPA-1 and 5061=> SPA-2 on the internet router * SPA-3, we have a pat 5062 => SPA-3 * SPA-4, we have a pat 5063 =>

" Hello, I have been trying to get my Grandstream GXP2000 phones to stop showing ringing state on monitored extensions. But no matter where I put notifyringing=no asterisk still sends the ringing state to the phones. Is this a bug I should report or is there another way around it. Here is how i have my subscriptions setup: extensions.conf [demo] exten => 6100,hint,SIP/100 exten =>

Hello all, I know it was on the list before but i have some questions about the Kirk IP600v3, the requested configuration files were send private i guess Does anybody have the correct SIP settings for handsets connected to the Kirk. IP600v3 I am particulair intrested in settings regarding: -Voice Mailbox -Call waiting -DTMF settings for e.g. parking an extension with asterisk functionality

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

I have an a bunch of SPA941 Linksys phones for users in and out of the office. When the phones are in the office (and on the same network as the asterisk server) the WMI goes on when it should and off when it should. But when the phone is on another network and natted it fails to do so. The light always stays off. Has anybody had a similar problem (and hopefully a resolve)?

I have 4 asterisk servers. They all have local phones on their local network they manage for SIP based conversations. We then have IAX between them all for inter-asterisk connections. This setup has worked well for nearly 2 years now, minor problems here and there but overall very nice. Recently we acquired some Polycom video conference units. I was able to setup our main server to host all

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Appearently SPA941 is less than a SPA942 without two ports, poe and backlight. There is less features too, it doesn't support BLF. Is it possible to hack 942-software into 941, or is there another workaround? Leif -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091112/0a6cbf82/attachment.htm

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Hi, I'm wondering - why SIP device state doesn't get updated to anything else, except Not In Use. For queue call (with Local channel) i get: app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use) app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use) app_queue.c: The device state of this queue member, Agent/21168, is still 'Not in

Hi, I'm having a problem getting a snom 300 to work with BLF (extension 222). I've set it to watch extension 220 in the function key config pages as per the wiki (BLF, <sip:220 at server.com>) but I can't get the light to come on when 220 is ringing. The SIP trace page doesn't show anything coming from my PBX when 220 is ringing or in use. Any help much appreciated as this

Ishfaq Malik <ish at pack-net.co.uk> schrieb: Hi Ishfaq > Look into Busy Lamp Field/Presence > > Here's a starting point: > > http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/asterisk-DeviceStates-SECT-1.html Thanks a lot, but it does not seems to work... Here my configuration: sip.conf: [general] allowsubscribe=yes subscribecontext = default

Hi all, i'm trying from several days to setup a SLA on my machine with some THOMSON 2030. My goal is to bind every F key to an extension (NOT a trunk). So, F1 = 201, F2 = 202, F3 = 203, and so on... I'm googled thousand of pages and many more confusing concepts are in my mind. My server uses extensions with numbering 2XX placed in context 'phones'. I set yet in sip.conf: