similar to: enum agi interesting problem

Dialing out If the AGI application dials outward by executing Dial, control over the call returns to the dialplan and the script loses contact with the Asterisk server. The script continues to run in the background by itself and is free to clean up and do post-dial processing. If you want your application to initiate a call out without being started through the dialplan: * Asterisk auto-dial

Dialing out If the AGI application dials outward by executing Dial, control over the call returns to the dialplan and the script loses contact with the Asterisk server. The script continues to run in the background by itself and is free to clean up and do post-dial processing. If you want your application to initiate a call out without being started through the dialplan: * Asterisk auto-dial

ENUM lookups at e164.org return a IP route for ALL toll-free numbers. I was surprised to observe that ALL toll-free numbers get a hit at e164.org. It appears that ALL toll-free prefixes have been delegated, thereby publishing an IP route for YOUR TOLL-FREE NUMBERS, my toll-free numbers, and even toll-free numbers that have not been allocated. :-) See below Should I care? Even though this

Recently, I've been having issues with the URIs returned from e.164.org and toll free calls. It seems that the URIs that are returned from ENUMQUERY and ENUMRESULT are no longer the proper numbering schemes that the poviders use. I've been using the following [enum] template in my outbound route for quite some time with great success until recently. [enum](!) exten =>

Does anyone have a better ENUM lookup handler than the built-in ENUMLOOKUP() function? The built-in function does not properly handle multiple return values such as: 8.9.9.3.2.8.8.6.6.8.1.e164.org has NAPTR record 200 10 "u" "E2U+SIP" "!^\\+1866(.*)$!sip:1866\\1 at tollfree.sip-happens.com!" . 8.9.9.3.2.8.8.6.6.8.1.e164.org has NAPTR record 200 10 "u"

Hello! I'm trying to setup a perl-deadagi, but my perl skills lack. can someone tell me why the following code doesn't work: #!/usr/bin/perl use Asterisk::AGI; $AGI = new Asterisk::AGI; $dialstring = $AGI->get_variable("DIALSTRING"); $res = $AGI->exec("DIAL $dialstring"); the asterisk output says: AGI Rx << GET VARIABLE DIALSTRING AGI Tx >> 200

hello! has this made it into 1.2.3 already: http://bugs.digium.com/view.php?id=6128 ? i'm trying to set a variable that should be used as a dialstring in the dial-command, including parameters seperated with the respective delimiter, e.g. like: exten => 907,1,Set(DESTINATION1=Zap/G1/4989123456789|10|gh) exten => 907,n,Set(DIALSTRING=${DESTINATION1}) exten =>

I have not used astcc with pin codes so far, since I set-up the phone number as card number. Some of my users want now to dial in to the system and than use their card, which is their phone number. For that I would need a way of authentication, like a pin. I want to use something like: What is your card number: <user keys in the number> Enter your pin: <user enter a long pin>

Hi I'm using a macro to dial in a AEL dialplan. The problem is the macro do not set the field CDR(dst), showing only ~~s~~. I tried various configurations, but without solutions. This is the macro: macro dial-out(destno,dialstring,route_descr,interno) { __TRANSFER_CONTEXT=ipbx; if(${interno} = 1) { Set(__PICKUPMARK=${destno}); if(${ODBC_verify_user(${CALLERID(num)})} > 0) { t = tT; }

I've got a macro that tries to find the first available SIP trunk to send outgoing calls on. It tracks the usage of the lines (since each trunk has a call-limit of 2) by using GROUP(). My problem is that once a call switched to ANSWER state, ``group show channels`` stops listing it and then my Macro starts screwing up because it's sending calls to a line that sometimes is full even

Hi all, i have asterisk 1.0.9 with an Eicon Diva 4bri and chan_capi-cm-0.6. I have 2 NTBAs (one with did and one without). When using the one without did, i am able to place outgoing and incoming calls. When i use the NTBAs with did i have a layer 2 error. Anyone an idea? -- Executing Dial("SIP/2004-9634", "CAPI/g1/43XXXXXX") in new stack > data = g1/43XXXXXX

I'm building a dialplan for use with a bunch of GXP2000 desk sets. During testing, we had some user issues surrounding the lack of an on-phone dialplan. Users would hit 9 and sit there waiting for a redial tone, and the GXP would time out, sending just '9' to *, which couldn't do much other than spit back a 404 or play pbx-invalid. I turned on the "early dial" option

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

On Wed, Jun 7, 2023 at 10:46 AM TTT <lists at telium.io> wrote: > I’ve reread the documentation a few times, and what isn’t clear is whether > I need an app=X parameter in the url. In other words, can I only get > events for a single named statis app? Or can I get events for the entire > Asterisk server? > > > > The command below (without app= parameter) results in

Hello List, I'm using a dialstring like the one below. I want to have three different things happening depending on exit cause. Dial(SIP/${phonenumber},20,gL(20000[:5000][:5000])) These 3 things could happen: 1, Caller hangs up 2, Callee hangs up 3, The 20 seconds is up and call is terminated from Asterisk. Is there a way to separate these 3? Thanks, Best regards, Tobias --------------

Hi, I just wonder, if it is possible, to suppress my own number on outbound dials with chan_capi. I took a look into the sources and think it might work with toggeling the "@" in front of the outbound msn in the dialstring. (Dial(CAPI/@msn... vs. Dial(CAPI/msn... But it doesn't work. Maybee I'm wrong and misunderstood the code. Thanks for any answers! Karsten

Hello! I'd like to Flash() a modem line (BRI) with Asterisk. It is a passive ISDN-card connected to a hardware PBX. I use ISDN4Linux. I recognised that unfortunately the Flash() application flashes Zap devices only. Now I am wondering how I could flash Modem/ttyI0. The source code chan_modem.c doesn't contain anything about flashing a modem line. So I tried to simply put the AT-command

Hi List, In one of my AGIs (using DeadAGI) I grab the answered time using: my $res = $agi->exec ("DIAL $dialstring"); my $answeredtime = $agi->get_variable ("ANSWEREDTIME"); However this information differs from what's written in the Master.csv file (which happens to be the correct value!) Any ideas why? I'm using asterisk 1.2.7.1 and the

At the moment, we have a feature where if someone's sip extension is called, we also make another call to their mobile. We use the "c" option in the zap dialstring so that the user has to press "#" after answering to confirm the call (this prevents things like the answermachine grabbing the call if the mobile is switched off). We are now looking to move towards a sip

Is there anything already out there that can efficiently convert a JSON string into Asterisk dialplan variables? Our current backend speaks JSON and we need to parse the response to construct the dialstring. -- Eric Chamberlain