similar to: problems in h323 channels

Hello, I have a strange h323 issue. After executing command "Dial("SIP/333-0d1dfe00", "H323/361737052390920 at ccg|5|tT")" at Oct 18 22:32:23. Meanwile I have sniffing traffic on port 1720. The call was established just at Oct 18 22:33:03 (New H.323 Connection created.) and also packet sniffer grabs the h323 invites at this time also. So my question is what

Hi, My configuration is SipPhone<-->*1<--->*2. My asterisk version is 1.4beta3. I installed pwlib,openh323,chan_h323. When i call from SipPhone--(SIP)-->asterisk1---(H323)-->asterisk2, there is no audio. Using 'rtp debug', I can see that rtp packets are being received. Rtp packets are being exchanged. I also tested chan_ooh323, but to fail. Can anyone recommand best

Could you help me with this problem? When I call H323 gateway there is no sound in both ways. Here is h323 debug: ----- begin ------------------------ -- Executing Dial("SIP/msn-6297", "H323/73952389512@peer:1720") in new stack Allowed Codecs: Table: G.729A{sw} <1> G.729{sw} <2> G.711-uLaw-64k <3> G.711-ALaw-64k <4>

Hi all, I used oh323 support from inaccess. It work very well. I would like to test h323 integrated support. This my problem when I test it : I cannot heard any thing in both way. The test is : SIP --> Asterisk --> H323 This is th debug trace from h.323 : -- Executing Dial("SIP/someaccount", "H323/0033172897104@somehost") in new stack

Hi all, I'm using following software and equipment and I have very strange behavior: Asterisk CVS-NHEAD-05/30/05-16:42:41 H323 gatekeeper - GnuGK 2.2.2 IAX2 client - Firefly 1.9.8 build 3945 H323 client - SJPhone Build 1.50.271d H323 gateway - Welltech Wellgate 3504A When I dial from Firefly (IAX2) -> SJPhone (H323) everything works as expected. When I dial from SJPhone (H323) ->

Hi all, I am using chan_h323 from Asterisk CVS to interconnect with GNUGK v2.2.2. Then I made call from a H323 EP, thru GNUGK, to SIP EP on Asterisk. However, I only heard ringing when the call was answered on SIP side. Below is the debug from chan_h323. Any help is welcome. Thanks. *CLI> == New H.323 Connection created. -- Setting up Call -- Call token:

Hello everybody, I?ve been trying to solve a problem for several weeks now but it really beats me. There are several hard phones connected to an Innovaphone 3000 VoIP gateway. On the other side I have a SIP softphone connected to Asterisk. The problem I have is that on incoming calls (hardphones to softphone) I only have outgoing audio (from soft to hardphone); everything is OK when I call the

Hello, I'm trying to use the GSM codec with Nufone H323 but it's not working. Does somebody has some idea? Have I missed something? Thanks!! Celso Fassoni Some additional info: (I'm using CVS-HEAD - downloaded today) monkey:~# cat /etc/asterisk/h323.conf [general] port = 1720 bindaddr = 192.168.0.100 ; this SHALL contain a single, valid IP address for this machine

Hi all: I've got some core dumps when I use chan_h323. I dial an extension using h323, routed thru an E100P (like a H323-ISDN_PRI gateway). Sometimes * hangs, sometimes not. The client used for test es SjPhone (http://www.sjlabs.com/). This is the data for one core dump: (gdb) bt #0 ast_rtp_get_us (rtp=0x0, us=0x5074759c) at rtp.c:790 #1 0x41f8879c in create_connection

Does asterisk work with CCM as gateway ? When I trying call asterisk,I totally can't hear any sound. When call ohphone - works good. 10.0.1.219 is CCM, 10.0.1.207 asterisk. Trace messages here : -------------------- == New H.323 Connection created. -- Received SETUP message... == Setting up Call -- Calling party name: [5001,] -- Calling party number: [5001] -- Called party

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

Hello all, I just installed Asterisk with H323 support (chan_h323 from Jeremy McNamara). But experience problem while connecting OpenPhone to Asterisk Here is h.323 trace: 5:37.444 H323 Listener:9c86de0 transports.cxx(1504) H323TCP Started connection: host=10.120.160.15:3172, if=10.120.160.99:1720, handle=27 5:37.444 H225 Answer:9cc1250 transports.cxx(564) H225

Hi All, I have set up a box that will be used as follows: SIP Phone ----> Asterisk ----> Cisco H323 VoIP Server 192.168.1.5 192.168.1.50 192.168.1.80 Asterisk is running the latest CVS and oh323 driver. The SIP phone is a Grandstream Budgetone 100. I have everything setup and running with G.711 ALAW and ULAW and i'm able to make calls through

Here i am doing a dial command from a php agi... EXEC DIAL H323/123456789@xx.xx.xx.xx:1720|40|HL(585000:61000:30000) But asterisk is not disconnecting the connection after 585 secs... the result is ... answered time is 1926n but thing is time out is working some time and some time not.... LOG: 2005-06-28 20:26:13 VERBOSE[19094] logger.c: callcard.php: string(111) "app_callingcard:

Hi Friends, Hope you would help me out here, I have searched the asterisk user list for hours and also read the readme and test files that comes with the driver. I need a very simple scenario. I have SIP clients and want to use oh323 to dial out to PSTN using a h323 gateway. a)If I set the extention.conf like this: exten => _87.,1,Dial(OH323/16.52.153.206) oh323 dials out (I can ring a

I am using Nu Fone Network's h323 drivers. I can place H323 calls using following in extensions.conf file, exten => _1732.,1,Dial(H323/${EXTEN}@192.168.1.2) If I need to use h323.conf to do the same I cannot configure h323 to do the same. I get everyone is busy message and I do not see IP packets being generated by * trying to communicate to 192.168.1.2. Can someone point out what I

hi .. i've just installed and licensed an instance of the G729 codec. I am trying to connect through asterisk to Go2Call server .. According to their info it involves dialling extension 729 on voip01.go2call.com, to get the IVR. my extensions.conf shows : exten => s,2,Dial(OH323/h323:729@216.52.153.206) which I think is correct, I have G729 enabled in the OH323.conf file and it seems to

Heya, I changed the Makefile of the h323-channel-makefile (I downloaded cvs of a couple of hours ago) so that I don't have to rebuild pwlib and openh323, but can use the precompiled versions. I'm using pwlib 1.8.3 and openh323 1.15.2. There aren't many changes. I replaced OPENH323DIR with OPENH323INC ,which points to /usr/include/openh323 for me and OPENH323LIB, which points to

My configuration is: [ISDNPRI] -- [CISCO AccessServer AS5350] --<H.323>-- [ASTERISK] -- [CISCO ip phone 12SP+/Skinny] When call is initiated from IP phone -> Asterisk -> AS5350 -> ISDN everything working ok (RTP is ok). But, when call coming from ISDN -> AS5350 -> Asterisk -> IP phone IP phone party can hear ISDN party, but ISDN (incoming) party canNOT hear IP phone party

Try sending 5350 config and oh323.conf, versions, etc... -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Goran Dj. Sent: Wednesday, December 22, 2004 4:43 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Asterisk->AS5350 misplaced RTP to 127.0.0.1(AS5350 party