similar to: Proper install order for Asterisk and it's related packages..

I am current running on a production system zaptel 1.4.12.1 libxpri 1.4.1 asterisk 1.4.25 The above configuration works. I tried to update to dahdi 2.2.0, libpri 1.4.7 and asterisk 1.4.25 This did not work. calls came in but not out. I dropped back to the initial configuration. Today, I dried only updating libpri on the original configuration. I removed /usr/lib/libpri* installed libpri 1.4.7,

Hy guys i am having so much hard time to setup asterisk on a virtual machine that i got , i just want to know if i really need to use Dahdi and libpri on a complete Digital PBX i just gonna use sip and iax. I will never use any kind of analog line on this machine. Wait for a feed back. Daniel Abreu.

Hello, I'm rather new to svn, so please, forgive me if this question sounds naive but is it normal that no trunk/ subdirectory is visible in http://svn.asterisk.org/svn/libpri/ ? I can see a trunk/ subdirectory in either asterisk, dahdi-linux or dahdi-tools. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I am having trouble setting the signalling method for the B410P using DAHDI. Asterisk complains that it has never heard of 'bri_cpe' or 'bri_net' - but it doesn't mind having 'pri_cpe' etc. ERROR[4294]: chan_dahdi.c:11327 process_dahdi: Unknown signalling method 'bri_net' Dahdi - dahdi-linux-complete-2.1.0.4+2.1.0.2 Asterisk - 1.4.23.1 Libpri - 1.4.9

Hi, I've been building a new Asterisk server to replace my previous one, all using the latest 1.4.x downloads from asterisk.org. I can't even get to the point where dahdi works. I have libpri, dahdi and dahdi-tools compiled and installed. I have no hardware on that new server, but I am installing Dahdi for timing source for meetme. Everything compiles seemingly well, but this is

Hello, After all these years installing from source, I'm giving Dahdi package installation a try on a recent Stretch box. Google over the web, I didn't find too many doc on this topic. 1. Is this one [1] up-to-date ? Reading Stretch I would say a single asterisk-dahdi would be enough to install asterisk dahdi and libpri. 2. On my box, the following fails. What would you suggest ?

Hi, While issuing make, I've got: ... CC [M] /usr/src/zaptel-1.4.11~dfsg/kernel/zaptel-base.o /usr/src/zaptel-1.4.11~dfsg/kernel/zaptel-base.c: In function ?zt_register?: /usr/src/zaptel-1.4.11~dfsg/kernel/zaptel-base.c:5230: error: implicit declaration of function ?class_device_create? My system is Lenny and before getting this error, I successfully did : apt-get source libpri zaptel

I have an ubuntu 8.10 machine. Linux 2.6.27-14-generic i want to configure a x100p card an use it with asterisk, so i download, compile and install: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 i try almost everything i found on the net but without success: if i run lspci: 04:06.0 Communication controller: Motorola Wildcard X100P when i run dahdi_hardware appears this:

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

Hi Guys, I have to upgrade to latest Libpri 1.4.10.2 due to an existing bug in the current 1.4.10 version. I am running Asterisk 1.4.x (in fact it is a PBXinaFLASH system). How can I upgrade to the latest Libpri? Do I need to re-install Asterisk? Won't that break the box? Can I simply do this to upgrade: *rm /usr/src/libpri/*.** *rm -rf /usr/src/libpri/** Download the new libpri and put

Hi, After an upgrade, I discovered yesterday strange things I would like to share here. Basically, I'me comparing platforms: The first one is a 2.6.26 (Debian Lenny) platform, with Asterisk 1.6.1.18, Libpri 1.4.10.2, Dahdi revision 8853 (must be between 2.3 and 2.5, I think). The second one is a 2.6.32 (Debian Squeeze) platform, with Asterisk 10.5.1, Libpri 1.4.12, Dahdi 2.6.1. Both are

I`m currently having aleatory call drops through a PRI and so I want to upgrade libpri. In case I have errors I will want to downgrade libpri, that`s the reason why I asked. Asterisk version: 1.6.2.13 Current Libpri: libpri-1.4.10.2 Libpri to be upgraded to: libpri-1.4.11.5 Any help will be thanked! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello All, I am trying to install Asterisk 1.8.13.0 & dahdi-complete 2.5.1 & libpri 1.4.13 version. Is it possible to install dahdi on Sun Solaris? I have searched so many, but don't found any help. I am using "SunOS solaris-server 5.11 11.1 i86pc i386 i86pc" on Virtual Box. -- Regards, Chandrakant Solanki -------------- next part -------------- An HTML attachment was

i have this card installed Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) following the steps below found on freepbx site cd /usr/src/dahdi-linux-complete-2.2.0.2+2.2.0 make make install make config /sbin/ztcfg echo "/sbin/ztcfg" >> /etc/rc.d/rc.local cd /usr/src/libpri-1.4.10.2 make clean make make install when i run make config i do not get

Hi, I'm using Asterisk 1.6.1.18 with latest Dahdi Linux and Tools (rev 8854) and libpri 1.4.10.2. During installation, I'm facing this : # dahdi_genconf -v system Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Of course, I've got span descriptions in /etc/dahdi/genconf_parameters : .... pri_termtype SPAN/1 TE SPAN/2

Hi, I'll soon replace a Junghanns OctoBRI with a Junghanns QuadBRI. As both use wcb4xxp driver (dahdi 2.3.0, libpri 1.4.10.2 and asterisk 1.6.1), I'm planning to proceed this way : 1. Edit 2 versions of files /etc/dahdi/system.conf and /etc/asterisk/dahdi-channels.conf (one for each card). 2. Link current system.conf and dahdi-channels.conf to QuadBRI files. 3. Power PC off 4. Swap cards

Hi there, I just upgraded a relatively old Asterisk installation (1.2) in our office to a relatively new version (1.6svn from last wednesday) which runs a Junghans QuadBRI card [1]. To get this flying I got dahdi-linux, dahdi-tools and libpri from SVN as well. After a while of juggling it "works". What doesn't work: connected ISDN devices (Gigaset phones connected to QuadBRI

2017-03-14 13:08 GMT+01:00 Tzafrir Cohen <tzafrir.cohen at xorcom.com>: > On Tue, Mar 14, 2017 at 11:10:57AM +0100, Olivier wrote: > > Hello, > > > > After all these years installing from source, I'm giving Dahdi package > > installation a try on a recent Stretch box. > > > > Google over the web, I didn't find too many doc on this topic. >

Dear Supports, I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked! Could you please give me some hints? Thanks in advance! Here are my environments: ------------------------------ CentOS-5.3 Kernel-2.6.18-164.el5 asterisk-1.6.1.6 dahdi-linux-complete-2.3.0+2.3.0 libpri-1.4.10.2 OpenVox-B800P(the first port is spliting into

hi all, just had a terrible and sleepless weekend at the office trying to get asterisk going, its just tough love ;) have tried several asterisk versions but i currently have the following setup on debian lenny that kind of works. asterisk-1.6.2.0 dahdi-linux-complete-2.2.0.2+2.2.0 libpri-1.4.10.2 freepbx-2.6.0 setting up the sip devices is no problem at all, the difficulty i have is setting