similar to: opening 2 and more channels on 1 SIP account

G'day. I hope this isn't off-topic for the list. I am looking at an Asterisk setup that includes cordless phones. The three choices I can see, at this stage, are: * wifi phones * an ATA and a cordless analog phone * a DECT to SIP basestation The various wifi phone options don't grab us as suitable -- they are costly, have poor battery life and even the best have pretty mixed

Hi all, I'm looking for a PCI card which i could install on asterisk box, with purpose to use 15-20 cordless dect phone in a very "dect cell". Is there anyone that could help me pls ? Thanks Giordano -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi folks: I know it's come up a few times before, but I need some more detail. I'm looking for a SIP DECT (cordless) phone for North American installations. I've heard only of the Siemens Gigaset S450/C450 phones. Apparently these aren't sold for use in NAm, even though they're supposed to be legal (in the United States, anyway). On top of that, I understand they have some

Hello. Is anyone aware of a manufacturer of DECT cordless phone interface cards to act as the DECT base station that would be addressable channels under * ? Regards Petar -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040418/c8885bbc/attachment.htm

Hi people! I am not getting smart getting asterisk 1.6 behind a NAT to run. 1. I enabled IP forwarding on debian linux 2. told asterisk in "general" that he is behind NAT and mentioned him his external static IP Adress as well his domain in the outside world. If a client who is connected with a DSL modem calls me, a grandstream module in the LAN behind the router, in the same network

Hi people! I am looking for a h.323 implementation guide for asterisk. I looked in the doc folder of the latest asterisk source distribution and I didn't fund anything acording to this subject. If you guys could give me any advise, I would thank you. Tamer

Hi! I have problems building asterisk 1.6.0.6. ./configure --prefix=/usr make gets me: enerating embedded module rules ... [CC] extconf.c -> extconf.o In file included from /usr/local/include/datatypes.h:50, from /usr/local/include/err.h:49, from extconf.c:45: /usr/local/include/integers.h:50:67: error: srtp_config.h: No such file or directory In file

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

I've just ordered a Siemens Gigaset C450 IP cordless IP/DECT phone, given that it's supported by asterisk http://www.voipuser.org/review_41.html However, I see that a slightly better Gigaset S450 IP is available for only a slight price premium. Are there any user experiences with the S450 IP? -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org

Anyone have practical experience using inexpensive GAP-compliant DECT handsets with the Snom M3 basestation? When I asked Snom support, the answer was that 'basic functionality should work', but they didn't elaborate. I'm _guessing_ that means registering/unregistering with the base, making calls, and receiving calls (including presenting caller ID). They also stated that they

Hi people! I want to save the 1st letter from the ${EXTEN} variable. I don't want to trim it, I want to RESAVE it into a new variable. Let us assume the ${EXTEN} contains: 0698332977 then I'd love to get the 0 I would thank you for all advises. Tamer

Now that I actually try and google for it, I can't find any dual mode GSM/DECT handsets, only pages telling me that they exist without any actual information!!! Does anyone know of any such handsets? (and even better, ones that are available in Australia) I've searched a few of the major gsm manufacturers (nokia, Panasonic, sonyericsson) but their web sites are absolutely pathetic to the

Anyone know of a cordless 4 line DECT phone that does't have an answering machine? Or one that costs less than $300.00 (even with answering)? Yes I tried Google but Geeee too many results still sifting thru. TIA

Hi, I have two DECT cordless phones (one Philips Onis 6311 and one Philips Onis2 Memo-6511). The first one is for the french standard and the second one for the british standard. Both of them have callerid functionality. The british one does not show anything when connected to my PSTN line. I have not yet tested the french one. What I want to do is to connect both of them to the same ATA box.

Hi, I am investigating getting a wifi VoIP phone because its may be a better option than an ATA and a cordless phone.. Does anyone have any experience with the whats out there?? Do they support things like WPA etc?? I have heard the battery life can be a problem.. Is this the case? Thanks..

I have a need for an ATA that will register over wifi. *NOT* a DECT phone or other cordless type phone plugged into a wired ATA. Not seeing one right off, and following the recent discussions about compact fanless systems, I thought a custom build-your-own might not only be useful for my purpose, but may be a viable product in its own right. So I started looking for mini-PCI based FXS cards.

I'm looking to build a VoIP solution for 100+ service vehicles that have WiFi hot spots installed (with cellular uplinks). Currently we are trying out Skype wireless handselts and Majick Jack. I'd also like to consider an Open Source solution that can bring the calls back to our data center [possibly integrated without our existing BCM 3.x VoIP PBX]. For hardware someone on the IRC

Hi people! Do you guys know where to find a STUN Server Howto?! Why?! We all know, to get Asterisk behind an NAT Router to run, is a bit tricky, and you might have to fire a lot of holes in your firewall. However, I would appreciate it very much if somebody could give me great links of how to set up a STUN Server. Tamer

Hi people! I am coding a special sollution for that I need to know if I can send AT commands in the extensions.conf, to one subscriber. Is there a way doing this through asterisk 1.6 ?! For sure anybody of you, would as why I want to do that. I want to speak to my endsystem directly with AT commands. For any advise, I would thank you kindly. Tamer

Hi people! I need help according getting asterisk 1.6.0.6 installed. I posted to digium, but it seems to be that it is not an error, but either I am not getting smart what I have to do, to get it solved (configured and installed as well). ./configure make gets me this output: In file included from /usr/local/include/datatypes.h:50, from /usr/local/include/err.h:49,