similar to: notifyringing=no does not work

I am trying to get something working that is just not doing quite what I want. It may not be possible, but I figured it was worth asking about. The details: Asterisk 11.6.0 Polycom SoundPoint IP650 phones running 4.03 firmware. We have a queue with 4 phones in it. ringinuse is set to yes and the stategy is ringall. In sip.conf, we have notifyringing set to yes as well. Asterisk is sending

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Group I'm having trouble getting hints to work correctly using SVN-branch-1.4-r59289 I have hints working on several other systems but I must be missing something this time around. VoIPGW*CLI> show hints -= Registered Asterisk Dial Plan Hints =- 30@default : State:Unavailable Watchers 3 29@default :

Hello everyone, I'm getting DIALSTATUS=CHANUNAVAIL when a call is trying to get one of my queue interfaces, despite the fact it is free at that time, can you give help? 1. I see many sip channels from that extension: [root at mysweetpbx]# asterisk -rx "*sip show channels*" |grep 648 Peer User/ANR Call ID Seq (Tx/Rx) Format Hold

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

Hi there, I am trying to setup a configuration that requires me to use SIP and asterisk behind a firewall and over a VPN to a remote office and with some local Phones also. I can't use IAX to my provider because they don't offer it and my handsets ( snom 300 ) also don't support IAX so it's all SIP. The configuration is a follows Asterisk PBX 10.202.17.217/24 ------>|

Hi, I'm wondering - why SIP device state doesn't get updated to anything else, except Not In Use. For queue call (with Local channel) i get: app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use) app_queue.c: Device 'SIP/21168' changed to state '1' (Not in use) app_queue.c: The device state of this queue member, Agent/21168, is still 'Not in

Hello, we want to setup the following scenario: - each user has a softphone AND a hardphone - the softphone is started with the operating system - the hardphone is connected all the time using SIP - only ONE extension for each user Both phones should ring when the user is called. We've setup an asterisk 1.4.18 and at the moment only the last registered client rings. In Asterisk 1.2 the

Hello list, I read this in sip.conf : notifyringing = no ; Control whether subscriptions already INUSE get sent RINGING when another call is sent (default: yes) What does this mean ?! Does this mean that when I mark this as "yes", a phone that already has taken a call will be send a second and third call ?! I want that if a phone is in use (calling), the phone does not

Hello all, I know it was on the list before but i have some questions about the Kirk IP600v3, the requested configuration files were send private i guess Does anybody have the correct SIP settings for handsets connected to the Kirk. IP600v3 I am particulair intrested in settings regarding: -Voice Mailbox -Call waiting -DTMF settings for e.g. parking an extension with asterisk functionality

Greetings listers. I'm running asterisk 1.4.21.2 on SUSE 11.0 using Polycom 501 phones. My outgoing connections are Zapata using a TDM401P. For the most part I can make and receive calls fine except for these 3 issues: 1. When I call an external conference, the call never bridges and hangs up after 60-90 seconds. 2. When I call another number there is a

Hello With 1.4.23.1, I can't really see any difference between setting this value to yes or no. Can you explain ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090304/ccf0f222/attachment.htm

Asterisk can know that one of the attached phones is both "ringing" and "on the phone". However the sip NOTIFY it sends out to interested parties can only communicate one state, for example with pidf+xml it can either send "Ringing" or "On the phone" and so it sends "Ringing". This makes the "busy lights" less than useful, if a call

Can anyone help with BLF for Snom 300s ? (Asterisk 1.4.10.1) I've setup hints for a couple of Snom 300's but Asterisk doesn't send Extension Changed messages to subscribed phones unless the second 'line' button is used (I've tried Snom's version 6 and 7 and two difference 300s). On the Asterisk Console I don't see any message when picking up a Snom 300 and dialing

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

Hi all! I am trying to figure out how DEVICE_STATE is working, no luck so far. sip.conf [0317998975] type=friend regexten=0317998975 secret=???? username=0317998975 callerid="Magnus Benngard" mailbox=0317998975 at inputinterior.se host=dynamic canreinvite=yes dtmfmode=rfc2833 nat=yes disallow=all allow=alaw extensions.conf exten => 0317998975,hint,SIP/0317998975 exten =>

Greetings List. we're facing a strange case with my system where in the middle of the call .. after like 7 minutes (not necessarily ) the callee is unable to hear the caller however the caller is able to hear the called party. the scenario is the following. 1- 15 computers running Windows XP SP3 joining a Windows Domain Controller with DHCP , DNS, ISA Internet Acceleration Server. 2- Internet

Gentlemen, I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk. 0851711201 and 0851711290 is on our WAN, no NAT. 0197673581 is outside our WAN and needs to be NAT'ed. Sending a fax from 0851711201 to 0851711290, no problem, switches to T38 and fax goes through. Sending a from 0197673581 to 0851711201, no problem as long as i dont enable T38 on 0197673581. But, if i enable T38

Ishfaq Malik <ish at pack-net.co.uk> schrieb: Hi Ishfaq > Look into Busy Lamp Field/Presence > > Here's a starting point: > > http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/asterisk-DeviceStates-SECT-1.html Thanks a lot, but it does not seems to work... Here my configuration: sip.conf: [general] allowsubscribe=yes subscribecontext = default

Hi all, i'm trying from several days to setup a SLA on my machine with some THOMSON 2030. My goal is to bind every F key to an extension (NOT a trunk). So, F1 = 201, F2 = 202, F3 = 203, and so on... I'm googled thousand of pages and many more confusing concepts are in my mind. My server uses extensions with numbering 2XX placed in context 'phones'. I set yet in sip.conf: