similar to: distictive Ringing in SIP

Hi All I have just upgraded from Asterisk 1.2 to 1.4 and am having trouble with with one of my ATAs not ringing. Basically, when I execute the Dial command, an error occurs: "Got SIP response 400 "In alert-info header: Empty value expected" Now in 1.2, I just issued the following command to overcome this problem: Set(_ALERT_INFO=). Now in 1.4, _ALERT_INFO is deprecated, so I

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

This is a problem that is completely stumping me, and my understanding of Asterisk dialplans tells me this should never be a problem. Moreover, this scenario works on Asterisk 1.4 but not 1.6. We have a customer with several Aastra 6731 phones. They want incoming calls from the PSTN to work and they also want to be able to call each other "internally" on a special non-DID number (like

Have someone running fine Alert-Info with a Snom 370 ( System Information: Phone Type: snom370-SIP MAC-Address: 0004132661BD IP-Address: 192.168.10.170 Firmware-Version: snom370-SIP 7.3.14 14961) i've tried exten => 200,1,SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-external) exten => 200,n,Dial(SIP/${EXTEN},30) Can see into the phone SIP trace is

Steve Edwards <asterisk.org at sedwards.com> schrieb: > You can fiddle with the ring tone by phone specific configuration and > phone specific SIP headers (sipaddheader(Alert-Info: ...)). > > These seem relevant: > > http://www.voip-info.org/wiki/view/RTTTL+melodies+for+ST2030 (the > discussion looks relevant as well). > >

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hi guys I'm using asterisk 1.4 and going on to Snom phones. I'm trying to add a sip header to make the Snom phone use a different ring tone on one particular incoming number. I have added the following to the dial plan of the incoming context +------+------------------+-------+----------+--------------+-------------------------+ | id | context | exten | priority | app

Hello, I think I have encountered an odd bug in Siemens C460 IP/dect handsets, which is a bit annoying, and I'm not (yet) sure how to get round it without lots of hacks. Basically, on all external incoming calls, we set: exten => s,n,SIPAddHeader(Alert-Info: Bellcore-dr2) This causes handsets (i.e. Cisco 7960 / Grandstream / aastra) to set a different ring cadence so to differentiate

Hi Everyone, Using Elastix (FreePBX + Asterisk 1.4.2x combination) with Aastra phones, how can one receive distinctive ring tones for INTERNAL calls ONLY? Even though FreePBX Inbound has an option for Alert_INFO but that doesn't work when the call comes into an IVR or Queue. The calls has to go directly to extension for external ringtone to be different. So, I am looking for internal calls

Hi list! Finally I got my Asterisk works with my two phones... It was a problem on my Firewall (for the phone of my wife) and on my Dialplan (for forwarding calls). Now all works as expected, at least in the simulation I did with AsteriskNOW. Hopefully it will work later, when Deutsche Telekom changes my ISDN to VoIP... Well, now I have some time to spend with "fooling"... My phone

Hi All, I am running into a problem setting the ringtones via _ALERT_INFO on the Cisco 7960 phone. I am using * 1.2.1 and have tried setting the variable to several values. I have also tried setting the phone's software to both 7.5 and 8.2 thinking that it might be a version issue, but with no success. I have examined the packets and do see the ALERT_INFO header being sent, but the

Hi all, Has anyone gotten custom ring tones to work using ALERT_INFO with the Cisco 7940 SIP phone? I've read the wiki, but just can't get this to work. I'm currently using the 7.2 SIP image. Thanks, Chris

Hi, I'm using asterisk 1.2.1 on a debian sarge distro. I've followed notes in http://www.voip-info.org/wiki/view/Polycom+auto-answer+config and http://www.voip-info.org/wiki/index.php?page=OptiPoint+600+SIP+-+Distictive+ring+using+ALERT_INFO but I still cannot change ring style via asterisk using exten => 666,1,SipAddHeader(ALERT_INFO="ring3") in extensions.conf . Is it

I've lurked for a while, but I think this is one of my first "pleas" for help. I'm having issues where a parked call using the macro below is getting "stuck". Users park the call via a blfxfer key on an Aastra phone. If the call is a blind transfer, it tries to park the call. If it isn't a blind transfer, it tries to unpark the call. Only 2 extensions (2759 and

Hello All, I have will pagination links in index view which works fine. but when i performing some other action and replacing list view that time pagination links i am supposed to be for index action. but they are not......links goes to last performed action. You have any idea how to fix this problem ? NOTE: i am updating list after creation of resource record that time pagination links goes

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Hi Can anyone with distinctive ring on their 7960's possibly post how they've got it to work? I understand that the ALERT_INFO variable is involved but using the examples for the variable value from the WiKi I'm just getting an error message from the Asterisk concole. Thanks in advance. P

Anyone have an example XML file for the PAP2T? Cheers, j

Hello All, I wanted to convert .html file into .pdf. is there any rails plugin ?? Thanks, Sandip R~ -- Ruby on Rails Developer http://sandip.sosblog.com http://funonrails.wordpress.com www.joshsoftware.com --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To post to this

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone