similar to: Recording calls and SLA

I understand that the Asterisk SLA implementation is somewhat different from most key systems and PBX systems. I also understand that in Asterisk, one does not put an SLA line on hold since it is just a MeetMe conference. However, is there any way to make the BLF flash when the answering party on the Asterisk system presses the hold key on their set and leaves the calling party alone in the

Hi All. I've been experimenting with SLA on Asterisk 1.4.13 (patched up to 1.4.14). I am using a SIP channel for my "trunk" line. On the whole things are good, but I have noticed that if I misdial an outgoing call, i.e. I get 404 "Not Found" in the SIP trace, then the trunk line just drops, rather than presenting an error tone or message to the user.

Fellow asterisk users, I am trying to get Single Line Appearance functionality working on a set of Linksys SPA942 phones and have not been successful. It looks like sla.conf is not getting read, only one phone reads as registered for the shared line, and a busy tone every time the shared extension is dialed. I have followed the documentation [1] and followed through other threads I saw

Has anyone had any success with getting SLA going between 2 SIP phones? (Particularly a set of Cisco 79xx's) The SLA document that comes with the asterisk source is about as clear as mud. Does anyone have a working sip.conf, sla.conf, and extensions.conf that I can use for reference? The part I'm most confused about is how to build the lines in sip.conf and how the phones should

I configured my sla.conf to use with a Polycom phone. I have no idea if I did it right, however, none of the console "sla" commands exist. Do I have to something special to compile in this support, or should it just work out of the box? ~jay

Hello I have an issue wit MixMonitor. I need to record only answered calls, so I set "b" option for this but calls still recording even call no answered My asterisk version 12.5.1, at my other servers with older versions of asterisk (11.8 for example) MixMonitor works fine. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone done SLA with Polycom phones? I've got a large project coming up where the customer is keen on SLA for trunks and extensions. Trunks will be on a PRI. We may do this with Cisco phones if they work better. Mark Willis

Greetings, Back in September someone asked about documentation for the new SLA feature in 1.4, however they received no replies. I thought I might ask the same question now in December. Apart from sla.conf.sample and a few comments in app_meetme.c I have been unable to find useful documentation. Is anyone using this feature right now? Is there a helpful source for information this highly

Hi all, I am having the following trouble with recording calls: When calls come into the support line did number, the call starts to record on the first queue, but appears to hang up when the call actually connects to the engineer (ie I see "got hangup request" on the cli and then mixmonitor ends.) I am guessing this has to do with the announce file that is played to the engineer

Has anyone successfully gotten the features of sla.conf to work with Polycom phones? I would like to get 501's to show 3 shared lines on each of the keys. Particularly I am looking for a sample configuration for the phone, the Asterisk configuration seems simple enough. I've searched and searched and searched and have not found anything, general info about SLA yes, but nothing specific

Hello, every body Anyone set up, the sla sharing line appearances, in asterisk, I'm setting, tha but, don't, work, I change the sla.conf, extensions.conf, and sip.cfg, but don't work fine. Any one, could setup, tha? Regards Carlos Rojas -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone have an example of using SLA with SIP handsets in Asterisk 1.6? I'm looking at the sla.tex file and wondering when it was last updated... Thanks, -Philip

Greetings. Just updated from 1.4.22 to 1.8. Minor changes in dialplan and things work ok. Except for one thing. I have a call to MixMonitor. This is implementing a dictaphone kind of app. With forwarding recordings to email and storing them on the server. The process works so that we dial into Asterisk and answer the phone, initiate MixMontior and WaitExten until recording finishes. Problem is

Hello, I am looking for a "real life" example of using SLA lines under Asterisk. I'll describe my environment and would like to know how I define it in Asterisk (version 1.4 final). Suppose I have two multi lines phones. The first phone has extension 1 assigned to it, and the second phone has extension 2 assigned to it. Now, I want extension 3 to be available on both phones as

On 8/7/07, raviprakash sunkara <sunkara.raviprakash.feb14 at gmail.com> wrote: > > Hello Russell, > Nice To meet U and Good Morning. I got u r mail-Id from > http://www.asterisk.org/node/48325 > Recently i started the SLA configuration. But i didn't understand the > Flow of its Functionality > One of the My Client Ask to have do deploySLA feature > He Using

Hi, I have a basic router that is shaping traffic, and it seems to be working at the moment. We have a 100Mbit connection to the internet, however we get charged for each mbit that we use and so have to shape/limit the traffic to avoid huge bills and my boss getting cross!! We have a /29 subnets set up as follows: tc qdisc add dev eth0 root tbf rate 0.8Mbit latency 50ms burst 10k tc qdisc add

Hi, Trying to configure my tdm410p card, my dahdi in asterisk cli was missing. ! ael agent agi cdr channel cli config console core database devstate dialplan dnsmgr dundi features file group hangup help http iax2 indication keys

Hello, I'm trying to set up call recording for a queue. Right now the recording appears to work correctly, but when I call and chatter for a minute or so, at the end of the call I end up with a very small file (less than 100 bytes), which contains about .06 seconds of silence. If I talk for another minute, this file will get up to 200 bytes or so. In my queue configuration, I have: [testq]

Hi all Does anybody know where this command is supposed to go? Set(MONITOR_EXEC=mv /var/spool/asterisk/monitor/^{MONITOR_FILENAME} /tmp/^{MONITOR_FILENAME}) In the queues.conf file it talks about it. So I naturally thought after I set up my monitor with monitor-format = wav monitor-type = MixMonitor That I could put a lame command in there to convert and move the file elsewhere for backup with

I have calls being recorded via mixmonitor which are not being recorded in their entirety. The calls are incoming G.729 calls recorded in G.729 format (which I know means a lot of licenses, and a bit of runtime, but the load on the server isn't great and it does save disk space). They seem to stop recording if the call it placed on hold for an extended period of time. Does anyone know