Displaying 20 results from an estimated 200 matches similar to: "Portech MV3770 & Caller-ID"
2007 Nov 28
1
Fw: Remove a TDM Card
Hi, sorry for my insistence but this is a big problem for me..my steps for
remove card are ok ?
Thanks.
------
Salvatore.
----- Original Message -----
From: "Sasa" <sasa at shoponweb.it>
To: <asterisk-users at lists.digium.com>
Sent: Monday, November 26, 2007 4:25 PM
Subject: [asterisk-users] Remove a TDM Card
> Hi, I would like remove a Digium TDM2400P from
2008 Oct 21
0
Problem with Portech
Hi, I use Asterisk-1.2.26 (with Trixbox-2.1.12) and Portech MV-370 and my
problem is that when I try to call an external mobile phone via Portech I
have alway busy and in log file:
Called Portech/348xxxxxxx -- Got SIP response 486 "Busy Here" back from
192.168.1.2-- SIP/Portech-086e5ee0 is busy == Everyone is busy/congested at
this time (1:1/0/0) -- Executing
2013 Sep 09
2
Sending SMS with a Portech MV-374 GSM Gateway
Hi,
I have a Portech MV-374 GSM Gateway and I'd like to send SMS from a web
page to confirm the subscriptions. How can I achieve it? Is Asterisk of
any use to send SMS with the Portech? I really have no idea because I
know nothing about the whole SMS thing...
Thanks,
Niccol?
--
http://www.linuxsystems.it
2009 Jan 16
1
Portech MV-378 with Asterisk
Has anyone been able to configure portech's mv-378 gateway with asterisk?
I did the configuration as per the manual but it does not work.
My server sees the portech gateway, but when the gateway is trying to
register to my server it fails. It says peer is not suppose to register.
The gateway and the asterisk box are on two different location (two network,
2 differrent IP address).
I would
2008 Nov 20
1
Sending / Receiving sms messages with Portech 370
Managed to get the portech 370 up and running with asterisk (even got
the callerid working!), but was wondering how (if) it is possible to
send / receive sms messages through the device . All I could find
googling was people asking how ;(
Does anyone have sms working with this device ?
Julian
______________________________________________________________________
This email has been scanned
2010 Apr 20
1
Portech MV-374 does not register
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
<font size="-1"><font face="Helvetica, Arial, sans-serif">Hello list,<br>
<br>
has anyone experience with the Portech MV-374 GSM-gateway ?<br>
<br>
I'm
2009 Nov 22
1
Portec - feedback wanted
I am thinking of buying a Portec MV370 (single channel VoIP/GSM gateway)
I am after feedback reports both good and otherwise please.
Thanks,
Michael
2008 Oct 07
2
Cisco 7906g & SIP
Hi, I have a problem with Cisco 7906G and SIP protocol use with Asterisk
1.2.26.
I have uploaded in my tftp server the firmware
'cmterm-7911_7906-sip.8-0-4SR1' that use 'SIP11.8-0-4SR1S.loads' and in
SEPmacaddress.cnf.xml I have:
<loadInformation>SIP11.8-0-4SR1S</loadInformation>
..but in tftp log server I have:
Oct 07 11:56:22 asterisk1.local
2008 Nov 06
0
Asterisk trunking
Hello !
I am experiencing some problems with Asterisk trunking, this is the scenario:
There are 3 servers, a DID server provider (VOIP provider) which
delegates us a bunch of DID numbers to our asterisk server number one
(I will call it AA), from which I route the calls to Asterisk server
number 2 (I will call it BB), which then terminate on phone handsets.
The trouble is, that I probably
2009 Nov 26
2
Problem with Portech MV-372
Hi,
I am experiencing a weird issue with my MV-372.
Mobile1 & Mobile2 are both registered to my asterisk server, I am able to
use them for outgoing call with no problem, but when I call the sims in my
gateway, they are routed to the right context/extension/priority, but as
soon as I hangup, the sim unregistered from asterisk and tries to register
with my the callerid of the last incoming
2005 Apr 28
11
Three NIC problem
Hi!
I have setup a router with 3 NIC:
inet->eth0->eth1-local_users
->eth2-DMZ_server
I have also setup dhcp and DNS on the router. DHCP is server only for eth1
while on eth2 I have static IP address. So everything works except
connecting local_users on eth1 to Samba shares on the server in DMZ by
server name. Yes, I have it in my DNS records to point to it and with
nslookup
2005 May 12
5
Redirect question
Hi!
I want to redirect all http and https traffic from my LAN to squid in DMZ -
transparent proxy.
How do I do that?
Regards,
Sasa
2014 Nov 03
2
[LLVMdev] Mips's MicroMips ??
Hello Daniel,
At the moment we are preparing the patch for disassembling microMIPS 16 bit instructions and it will be on Phabricator tomorrow or on Wednesday.
Functionality is implemented in MipsDisassembler::getInstruction where first two bytes are read and decodeInstruction is called with DecoderTableMicroMips16 and only if it fails we read 4 bytes and call decodeInstruction with
2010 Feb 08
6
GSM Gateway
Hello,
I am looking for a gsm gateway that is SIP based i.e no need of FXO/FXS
analogue connection.
I searched the email archives and found messages from 2008 but not sure
how accurate these are.
What do you use and how well it works ? The only sensible one I found
is one made by portech and one that is made by Eurodesign.
The one from portech is like a trunk while the one from eurodesign
2011 Sep 20
1
getent group not listing domain groups / wbinfo -r not working
I know, I know, this again :)
The company I work for would like to use squid for proxy authentication
purposes using NTLM, using a Windows 2008 R2 server as a DC. I've
managed to setup samba/winbind to use ads and successfully joined the
domain. Configured nsswitch.conf to lookup winbind entities (however I
didn't touch PAM configuration, as I don't actually want the users to be
able
2007 Jun 07
1
call Hold event asterisk
i need to catch the call hold event from my asterisk-java program. Im using net.sf.asterisk.*; for communicating with asterisk server. I need to get the call hold status on my java program . I can able to get the music on hold status but i cannot able to get the call hold status.
The events like
1. HoldEvent ,
2.HoldedcallEvent
3. UnHold event
are not getting fired when the call hold is
2003 Oct 08
3
2 questions regarding base-n and identifing digits
Dear listers,
I have two questions:
(1)
Is there a way in R to change the base-n of the calculations. I wnat to run
some calculations either in binary (base-2) or base-4. Is there a way to
specify that in R - to chnage from the decimal?
(2)
I also want to extract the digits from a larger number and store them as a
vector.
I could do it through converting top string, parsing the string and
2014 Oct 29
2
[LLVMdev] Mips's MicroMips ??
Hi,
We have this line in micromips-16-bit-instructions.s
# CHECK-EB: addu16 $6, $17, $4 # encoding: [0x07,0x42]
However, when I check this with llvm-mc, like below, I dont get back the
assembly.
This is against the latest LLVM code. What is wrong here?
Thanks,
Jun
$ echo "0x07,0x42"|./Release+Asserts/bin/llvm-mc -disassemble -triple=mips
-show-encoding -mattr=micromips
2008 Nov 29
0
asterisk-users Digest, Vol 52, Issue 81
I was cleaning and working on laptops most of the day. Check my logs, I did plenty of work.
-----Original Message-----
From: "asterisk-users-request at lists.digium.com" <asterisk-users-request at lists.digium.com>
To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com>
Sent: 11/29/2008 1:13 PM
Subject: asterisk-users Digest, Vol 52, Issue 81
2003 Feb 07
1
a question regarding s-plus libraries and R
Hi!
I am a relatively new user of R and I use it to prepare my dissertation. I
have come to some very usefull and specific libraries written for S-PLUS 4
and would like to use them in R. Is that possible? I just found out that one
of these libraries has already been transfered to R, while 3 others have
not. For the matter of beeing more exact I''m interested in the dealing with
missing