similar to: SIP debug messages

Hi Guys After googling a little I couldn''t find the correct answer.. When I use : tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip dst 192.168.0.11 flowid 1:30 , I can shape traffic to 1:30.( works like a charm) Now instead tc filter I would like to use CLASSIFY as below: iptables -t mangle -A POSTROUTING -o eth0 -d 192.168.0.5 -j CLASSIFY --set-class 1:30 but when I

Is there any trick to getting T.38 fax to work with SIP? I had it working and one day with no changes *poof* it stopped working and hasn't worked for months. The only common factor is Asterisk 1.4.x (always try to use the latest version) and NAT. I've tried: -Linksys ATA -Grandstream ATA -Audicodes ATA All do the same thing. Call connects, hear the first 2sec of fax tone and then just

Hi guys Finally , after reading a lot of docs from larc/opalsoft/etc, I decided to start learning some QoS First of all I''m trying to shape only download from a iptables+squid+qos machine for 4 machines at LAN ( eth0) Can anyone help me , cause it is not working properly.. ----------------------------------------------------------------- #!/bin/bash # 128Kbps

Gabe Bourque wrote: > Hello Anton Tinchev, > > I'm writing to you in hopes you can answer a few questions regarding > Asterisk/Digium and it's reliability. I saw your posting in the > Asterisk mailing list (Re: [Asterisk-Users] Is Asterisk ready for "real" > use?) and decided to write directly to you. The reason being that you > are one of only a few

Hi, I recently noticed that when doing "samba_dns --all-names --verbose" against Bind-9.12, I can't update dns records. I'm getting these error messages for each record to update: . . . update failed: REFUSED Failed nsupdate: 2 update(nsupdate): SRV _ldap._tcp.Default-First-Site-Name._sites.ForestDnsZones.samdom.com alpine.samdom.com 389 Calling nsupdate for SRV

I am unable to get my 9133i to register with my asterisk server. I am including config files below, this a simple test network so there's nothing secret in the config files. I have upgraded the phone to the latest software version (1.4.3) I'm not sure what the problem is. I can call the phone from a softphone, but the 9133i says "no service" on the screen and I can't dial

Happy new year! The last 3 months my asterisk has run perferct. But after I have set 15 new SNOM 190 phones on it dies every hour. Nothing to se in CLI ore in the log. It dies with exit status 139 Is there anyone who has an idea of what is wrong - ore any tip on how to test. /var/log/asterisk/messages .................... Jan 1 15:18:17 DEBUG[7193]: Stopping retransmission on

I can get messages without SSL with no problems. but i need to setup server accept only SSL secured connections. I think my configuration is very proper, but cant find "obvious" problem. Postfix 2.3.3 + dovecot 2.0.13-1_129.el5 + PostfixAdmin 2.3.3 I made own CA. configured postfix and dovecot with same cert key ca. Same public cert i gave for client just converted it to PKCS#12. I cant

Hi. I''m newie using LARTC. I have some pc''s and one 512/192kbits conection. I do not want that one PC uses all the bandwidth available. I made this script to limit, but I need that the applications (web browsing, messenger with cam and audo , p2p, etc) in pc''s continue acceding normally Internet. Would work this script? what type of qdisc could be added to htb in

Dear all, =0D =0D 3 Computers are linked together with cross over cable and computer B is t= he=0D router. =0D =0D Computer A - Starlight Video Server(Solaris) =0D - 192.168.0.11 =0D =0D Computer B - Iptables(Linux) =0D - eth0 - 192.168.0.12 =0D - eth1 - 158.192.92.102 =0D =0D Computer C - Video receiver(Windows) =0D - 158.192.92.105 =0D =0D First =0D # echo "1" >

Hello, I have the following setup: Fedora Core 6: cheeky (192.168.0.11/24, kernel 2.6.18-1.2869.fc6), trying to share dir /home/cheeky/Desktop/Documents and a printer. [root@cheeky ~]# smbclient -L localhost -U% Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.23c-2] Sharename Type Comment --------- ---- ------- Documents Disk directory

I have 2 internet connections and i;m trying to use squid as transparent proxy but every time squid is using first internet line but i want to use second internet line . i have this settings and without squid it''s working i have default route on the first internet connection. iptables -t nat -I POSTROUTING -o eth2 -p tcp --dport 80 -s 192.168.0.0/24 -d ! 192.168.0.0/16 -j SNAT --to

Hello list, could somebody please point me to the information (tutorial) how to configure this properly, or where is the problem? I need to access the share without authentication (it's an isolated home network)... It used to work on FC3 but I can't figure it out on FC6 :-( By the way, there's a typo in the original post: the windows machine is W98 not 95. thanks Marek --- Marc

Hi, using SLES10 I''m unable to synchronize the time of DomU with that of Dom0. There is a persistent offset of about 3 seconds! Here''s a small history (not actual output): remote refid st t when poll reach delay offset jitter rkdvmso1.dvm.kl 192.168.0.11 5 u - 64 1 0.136 -2977.1 0.099 *rkdvmso1.dvm.kl 192.168.0.11 5 u 2 64

On 04/02/2020 17:36, Marcio Demetrio Bacci wrote: > Hi, > > >> To "Domain User" group no, I haven't. > >I would give 'Domain Users' a gidNumber. > Now I assign a gidNumber. > > I'm following this article: > https://wiki.samba.org/index.php/Setting_up_a_Share_Using_Windows_ACLs > > But in "Setting Share Permissions and

Hi! Yesterday it was working very good, but today: # /usr/local/samba/bin/smbclient -L 192.168.0.11 added interface ip=192.168.0.100 bcast=192.168.0.255 nmask=255.255.255.0 session request to 192.168.0.11 failed (Called name not present) session request to 192 failed (Called name not present) session request to *SMBSERVER failed (Called name not present) 192.168.0.11 - PC with Win98; all

Just got another core-dump from Dovecot's imap process on our mail server. Dovecot 2.2.20 Solaris 10 / x86 Maildir Output from syslog: Dec 14 10:58:12 mail dovecot: [ID 583609 mail.crit] imap(oling): Panic: file imap-fetch.c: line 554: assertion failed: (ctx->client->output_cmd_lock == NULL || ctx->client->output_cmd_lock == cmd) Dec 14 10:58:15 mail dovecot: [ID 583609

Been having a problem with my two Sipura 2000's dropping calls from the SPA-2000 side. Seems the calls are dropped right before the "Next Registration" time. Calls drop about ever 60 minutes or so. I have dialed from one port to the other and let it sit. After about 60 minutes or so the calls get dropped. System details are below Asterisk ver. CVS-HEAD-11/27/04-23:42:45 RHEL 3

I've got a ShoreTel 210 MGCP phone drops calls. My packet capture indicates that the phone may be trying to renew its registration with *, but reports Restart Method of Disconnected (frame 2), then * seems to take that as a sign that it has lost the connection and closes things down. The phone, meanwhile, seems to think it can continue the conversation until a few ICMP "port

Hello My asterisk is stoping. i am using asterisk with ser on same mechine here is the asterisk trace ------------------------------------------------ -- Setting call duration limit to 3000 seconds. Sep 2 15:58:12 WARNING[10334]: rtp.c:852 ast_rtp_new_with_bindaddr: Unable to allocate socket: Too many open files Sep 2 15:58:12 WARNING[10334]: chan_sip.c:2313 sip_alloc: Unable to create RTP