similar to: Asterisk 1.6.x timing API

>Information on timing sources can be found here: >https://wiki.asterisk.org/wiki/display/AST/Timing+Interfaces >As noted on that page, ConfBridge can use any timing interface Asterisk >provides, and is not limited to the DAHDI timing interface. Generally, >timerfd is a good timing interface. >That aside, I would try to rule out external issues with the garbled audio

On 1/14/19 4:02 PM, Duncan Turnbull wrote: > > > Sent from my iPad > > On 15/01/2019, at 10:34 AM, Thomas Peters <TPeters at mcts.org > <mailto:TPeters at mcts.org>> wrote: > >> Duncan: >> >> You may have it right—I took one phone and set the ring time to 60 >> seconds. I now get about 4 rings on that one. >> >> I wonder how I

Hi! I have Asterisk 1.6.1 installed on OpenSuSE 11.0 running with choppy sound. One specialist on the forums asked me if I have DAHDI configured, he assumed that this could be cause of choppy sound problem. > dahdi_test Unable to open dahdi interface: No such file or directory Do I need to configure DAHDI even if I do not have any Zaptel devices? Is there any guide for configuring

Hi all I am using asterisk 11.24.1 on a centos 5 machine. kernel 2.6.18 flavor. (x86_64). I have about SIP 150 endpoints on it. when I send a message I'm getting garbled audio. I used to have a single PRI card in the box - but something happened and that connection no longer worked. I removed the card and also removed the system.conf and chan_dahdi entries. I am using ConfBridge in a PA

Carlos and Stefan (and other who have helped): I DON'T HAVE the res_timing_timerfd.so file. Can I build it? Recompiling Asterisk is unrealistic in my position but I wonder if I can build the one module. Here's what I do have: apbx:~ $ locate *res_timing_timerfd* /usr/src/asterisk-1.8.23.1/res/.res_timing_timerfd.makeopts /usr/src/asterisk-1.8.23.1/res/.res_timing_timerfd.moduleinfo

hi: my current system is 1.6.2. I have dahdi hardware card. I must disable res_timing_timerfd module or sometimes phone calls would become silent suddenly. I don't know the situation in 1.8. I heard that timing is still a problem in 1.8. should I keep using "res_timing_dahdi" or I can use "res_timing_timerfd" to get some benefit if I upgrade to 1.8? thank a lot for

I am getting the following warnings on the CLI when loading Asterisk 1.6.1-rc1: [Feb 12 12:32:34] NOTICE[22261]: timing.c:59 ast_install_timing_functions: Multiple timing modules are loaded. You should only load one. [Feb 12 12:32:34] ERROR[22261]: codec_dahdi.c:398 find_transcoders: Failed to open /dev/dahdi/transcode: No such file or directory [Feb 12 12:32:33] WARNING[22261]:

Hi Gang, My production box with my DAHDI cards is a 1.4.26 build. I have 3 test machines that I do IAX communication with. Machine 1 is a real Dell POWEREDGE 1500 running CENTOS running 1.4.30. Machine 2 is a SUSE 11.1 VM running 1.4.30. Machine 3 is another SUSE 11.1 VM running 1.8.0. I can SIP into all 4 machines and life is great. When I try to IAX from the live machine to

starting 161.1-beta3: chan_iax2.c:10925 build_user: Unable to support trunking on user 'iax-out' without DAHDI timing But I have these "timing" modules: ls /usr/lib/asterisk/modules/res_tim* /usr/lib/asterisk/modules/res_timing_dahdi.so /usr/lib/asterisk/modules/res_timing_pthread.so Do I need to do some magic to get these loaded? modules.conf is set to auto. Is this what

Hi All Just finished setting up a vm with centos 5.5 and asterisk 1.8.3 Using timerfd as a timing source. Has anyone got a similar setup in production ? How's performance? Thanks, Neeraj?

Duncan: You may have it right-I took one phone and set the ring time to 60 seconds. I now get about 4 rings on that one. I wonder how I can change the timing source. Thomas M. Peters | Sr. Systems Administrator | tpeters at mcts.org<mailto:tpeters at mcts.org> Desk: 414.343.1720 | Helpdesk: x3400 or helpdesk at mcts.org<mailto:helpdesk at mcts.org> Milwaukee County Transit System

Hi all Sometimes (about every three months) some of my Asterisk 1.8 boxes will start running this message thousands of times in the CLI: [Feb 12 14:18:23] ERROR[28129]: res_timing_timerfd.c:180 timerfd_timer_ack: Call to timerfd_gettime() error: Invalid argument [Feb 12 14:18:23] ERROR[28129]: res_timing_timerfd.c:180 timerfd_timer_ack: Call to timerfd_gettime() error: Invalid argument [Feb 12

Hello, i just made the reproducible watching: I send a Fax from asterisk (trunk) with spandsp (latest snapshot) via T.38 -> Audiocodes Mediant 2000 (FW 5.60.43.5) -> PSTN Fax With Internal timing Enabled, the Fax break after the first quarter from the first page is transfered. With Internal timing Disabled, the fax is transferred flawless. Both test with pthread timing module on a QEMU

We are running Asterisk 1.8.5.0 with an uptime of 40 weeks. Just today our streaming music on hold stopped working. I remember when we had first installed 1.8 we had an issue where the streaming music on hold would not work because Music On Hold was using the DAHDI timing module. We needed the DAHDI timing module loaded so that paging would work. However, at that time we upgraded to 1.8.5.0 and

Hello I just coding a AGI script for billing. - For external calls, I pass the call directly on a trunk. I do : Dial(trunk1/extension) -> OK ! - For internal calls (shortcode, others users ...) I am Dial(Local/extension at context/n) The problem is that through chan_local.so, I sound as it cut! Example if I call the voicemail ... "You have No messa ..." or "You have

Hello List! My Asterisk stopped making SIP-calls today, I could call from external, and saw Call coming in over PRI, but calling the SIP/Device wont work. I saw 5 open channels - all chan_spy. Only a restart helped. In the messages-file i found from yesterday: [Mar 4 17:28:01] NOTICE[25769] app_chanspy.c: Attaching SIP/209-0000170fto SIP/210-0000170e [Mar 4 17:29:38] NOTICE[25790]

Thank you for a quick answer, Dmitry! We have tried the settings you suggested but nothing helped. The machine is running 4.4.0-104 kernel, 4 cores, Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, clocksource is hyperv_clocksource_tsc_page, timing module is res_timing_timerfd.so. We have also tried to set 50% Reserve - no luck :(. ??, 18 ???. 2017 ?. ? 10:49, Dmitriy Ermakov <demonihin at

Hy guys i am having so much hard time to setup asterisk on a virtual machine that i got , i just want to know if i really need to use Dahdi and libpri on a complete Digital PBX i just gonna use sip and iax. I will never use any kind of analog line on this machine. Wait for a feed back. Daniel Abreu.

Hi all! Does anybody have experience with asterisk on Hyper-V? My test setup with Ubuntu 16 and asterisk 13.1 (ubuntu repo) shows sound distortion. I have analyzed the RTP flow with wireshark and I see high skew and delta values when the traffic leaves the hypervisor, however everything is okay when a capture is taken from a VM itself. I have read that there can be timing problems with Hyper-V. I

Hi, I've noticed on asterisk 1.8.18 I'm hearing the blip of '#' DTMF to end the recording on the recording itself. Is there an easy way to truncate the last 200ms of the recording or so to eliminate this? The DTMF is coming in through rfc2833 and not inband. Thanks. -- James -------------- next part -------------- An HTML attachment was scrubbed... URL: