similar to: connecting 66 analog phones to asterisk - hardware suggestions

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

Hi All I've got an asterisk system, using a couple of Xorcom Astribanks to provide FXS ports. (I'm using the zaptel 1.2 branch, if that matters) I've noticed that the ringing volume is a lot louder than on our old phone system, and people are starting to complain it's too loud. (This is the noise the phone makes when it rings, not the noise in your handset when you ring

Hi, Xorcom astribanks get initialized straight on when using Ubuntu 11.10 packages but I am having a hard time to get the same result running in a qemu/libvirt image. The first difficulty is that astribanks devices get different usb device ids during their initialisation process, requiring hot plug support. I have figured out how to solve this issue using the technique described in this post :

Hi All I have been able to get MP 104 FXO to make outbound calls with my asterisk box and polycom IP 500 phone. However I cannot get the incoming calls to hit the asterisk box. Any help will be appreciated. Thanks, Lal -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060612/36de60cc/attachment.htm

I have spent some time this morning trying to add an Astribank to our current Asterisk, but it failed, so I just removed the hardware, restore the config files to the original setup and started asterisk.; I could see that no Zap channels are started so I did load chan_zap.so: pbx*CLI> module load chan_zap.so [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application: Already have an

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

What is dahdi.auto_assign_spans and why should you care? In later versions the kernel module dahdi[Q] includes a new parameter: auto_assign_spans. It defaults to 1, and if you set it to 0, DAHDI can start behaving in strange and completely expected ways. Chances are the default will be set to 1 in a future version. Here is why you'll want to set it yourself. Up until DAHDI 2.5, hardware

I have the following extension to dial outside via SIP it's like this: phone----asterisk-----internet-----SIP provider----USA exten => _91NXXNXXXXXX,1,AGI(call_log.agi,${EXTEN}) exten => _91NXXNXXXXXX,2,Dial(${SIPtrunk}/${EXTEN},55,o) exten => _91NXXNXXXXXX,3,Hangup I want to strip the digit 9 before sending it to the SIP provider. Also, any suggestions for the above definition?

Hi, all My Asterisk uses a Digium TE120Pand I would like to add an Astribank zaptel_hardware sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hi, I have a problem with people that are calling from analog lines. We have a block of numbers 12345 - 0 to -99. Most calls are transmitting the whole number including the extension. There's no problem with that. But people calling from analog lines are connected to our asterisk box as soon as they finish dialing 12345. They don't get a chance to dial an extension. Just inserting a

I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX 2.8.0.2. We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we had it working for a while with one NT PRI and one TE PRI and, in the process of trying to configure another PRI, I ran into a couple problems. (1) As my configuration changes didn't seem to affect the Astribank, I power-cycled it. I

Hi, I am about to give a training session in Linux, using Centos 4.4 as a base. I want to give my students (MS windows administrators) printed books about Linux and hopefully Centos based. It is a total of 20 books. I'm also interested in purchasing 20 copies of the DVD of Centos 4.4 x86/x86_64 distro. My initial search at amazon returned no useful results. It can be RHEL 4, Centos 4 or

As stated here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+MeetMe A Meetme room uses Ulaw as the audio codec, so if the other channels use different codecs, then * will transcode. Does the app_conference application works the same way? Or if i have SIP/g729 users and i create a conference with other users also at g729 asterisk will not transcode (when using app_conference)?

Hello, I'm in the process of building an Asterisk machine and need 5 or 6 BRI-Channels. I was looking for the beroNet and Junghans cards and stumbled upon the Xorcom Astribank xBRI products. Has anybody tried out the Astribank xBRI-Channel Banks? Are they production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET octoBRI ISDN? Thanks in advance, Lars -- We don't like their

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

Hi Guys, An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc pbx*CLI> dahdi show channels Chan Extension Context

When you have a bunch of analog phones that you want to connect to asterisk, but those analog phones have no transfer button, what are the options to allow the phones to transfer a call? -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507)

Excuse my ignorance but if i have an asterisk in a LAN, and i have users in their homes/internet (dozens), in order to correctly connect those users across my firewall, what is the technology that i need to buy, called? secure border gateway? session controller? secure gateway? the audiocodes site seems to have many names for the same thing...but i better ask here and learn before i make a big

I cant find the server cd iso or torrent. Was it removed from all the mirrors? thanks, -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------