similar to: Problem with AMI originate

I installed version 1.6.0.3-rc1 and my AMI application stopped working. I reinstalled 1.6.0.1 and it worked again. I reinstalled 1.6.0.3-rc1 and it stopped. Looks like a problem in the software to me. Following the same steps using the same code for the AMI and conf files for * I get bad behavior in 1.6.0.3-rc1 and good behavior in 1.6.0.1. I have this action: Action: Originate Channel:

I would like to be able to stop the chanspy application and go to the next step in the dialplan but I do not see a way to do that. I have looked at the code and I do not see a way to stop the chanspy application. Even if there are no channels that match the chanprefix pattern the chanspy application is not exited. Hitting the * key stops spying on a channel but then starts spying on the same

Is there a way to inject sound from a sound file into an established call using AMI? I have an established call from which I can record either or both legs. I can additionally "spy" on the call. Is there any way I can play a sound file into the call and not loose the ability for the people to continue talking while listening to the sound file? -- Jim Dickenson mailto:dickenson at

I am trying to get updateconfig working. I found an example of updating configuration files here: http://www.voip-info.org/wiki/index.php?page=Asterisk+Manager+API+Action+Upd ateConfig When I tried it the conf file was updated but the new entry was not added. action:updateconfig reload:no srcfilename:manager.conf dstfilename:manager.conf Action-000000:append Cat-000000:newuser

I have an extension defined like this: exten => do_monitor,1,Answer() exten => do_monitor,n,NoOp(Just got '${CfMC_ActionID}') exten => do_monitor,n,ChanSpy(${CfMC_WhoHear},qX) exten => do_monitor,n,Hangup() I use an AMI packet like this: Action: Originate Channel: Agent/1001 Exten: do_monitor Context: cfmc_cdi_private Priority: 1 Variable: CfMC_ActionID=callE1334 Variable:

Is there any way that I can use AMI to play a sound file to both legs of a call without either issuing two commands, one per leg, or setting up meeting rooms? I would like to be able to play a sound file that can be heard by the caller and the person called using AMI. The only way so far I have been able to do this is the following. One problem with this is that people will hear sound out of

Jim, and all: Thanks for the response. If I can repeat what you are saying: you don't have to define the multiple lines in sip.conf? For comparison, with my current esi setup, we have 10 outgoing lines. If one line is busy, then the service just rolls to the next number. This is set up with the phone service. That doesn't have to done with outgoing sip lines? Does the dialstatus

Folks, I am strugging with Asterisk 1.4 Vs 1.6 differences over AMI Originate? Here is the pastebin... http://pastebin.ca/1805594 Not sure why the local channel won't send to context while the remote channel does. Worked fine in 1.4 but 1.6.1 has issues. Any help? Ritesh -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a dialplan that looks like this: [dorecord] exten => _*99XX,1,Verbose(2,Doing custom record) exten => _*99XX,n,Answer() exten => _*99XX,n,Verbose(2,Doing custom record - before wait) exten => _*99XX,n,Wait(0.5) exten => _*99XX,n,Verbose(2,Doing custom record - before record) exten => _*99XX,n,Record(/tmp/prompt${EXTEN:3}.gsm) exten => _*99XX,n,Verbose(2,Doing custom

Hi guys I seem to be having a problem, I don't know if it's a bug or whether I'm just doing it incorrectly. I want to set about 3 channel variables when I originate a call via AMI. All the documentation I have found says to do it like this: Variable: variable1=value|variable2=value|variable3=value However when I do this it runs them all together and I end up with:

I am running asterisk 1.6.0.1. I have a Grandstream GXP280 phone I use for testing. In addition I register a zoiper SIP soft phone. For the Grandstream I have busylevel=1 in sip.conf. If I place a call from the GXP280 to zoiper and then put that call on hold from the zoiper side and then call GXP280's extension, asterisk indicates the phone is ringing. As the GXP280 is a single line phone it

I sent this email a few days ago but did not see any responses to it: > I am running asterisk 1.6.0.1. I have a Grandstream GXP280 phone I use for > testing. In addition I register a zoiper SIP soft phone. > > For the Grandstream I have busylevel=1 in sip.conf. > > If I place a call from the GXP280 to zoiper and then put that call on hold > from the zoiper side and then

We have a client that currently has a Microsoft Lync setup. I must admit I know nothing about this setup. What we would like to be able to do is allow the phones on desks connected to this server the ability to dial something that would allow the phone to access an asterisk box to be able to do an agent login over their LAN. Is there any way to do this? Can the Lync server have a SIP trunk to

I have an i686 cpu and when compiling from source I get this error: touch /usr/src/dahdi-linux-2.2.0/drivers/dahdi/xpp/init_fxo_modes.verified Building modules, stage 2. MODPOST WARNING: could not find /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/.vpmadt032_x86_32. o.cmd for /usr/src/dahdi-linux-2.2.0/drivers/dahdi/vpmadt032_loader/vpmadt032_x86_32.o Anyone else seeing this?

Hello! I want to thank everyone who helped me out with tips for load balancing asterisk machines in a cluster. I have encountered a new problem that is related to SIP diversion headers in the INVITE. I make calls through the manager interface and now want to add a SIP-Diversion header that changes the CallerID of a number that is not available on the trunk, the CallerID to be visible externally

Does Asterisk, currently using version 1.4, get any more information about the result of an outbound call made over a PRI line compared to a call via a SIP trunk? As an example, in a PRI call there is this message that shows up on the console: [2011-01-05 14:59:02] -- Channel 23 detected a CED tone from the network. for a call to a fax machine. Does asterisk set anything that a dialplan can

I have this extension: exten => 1322,1,Answer() exten => 1322,n,Set(CfMC_AMDValue="NotChecked") exten => 1322,n,GotoIf($["${CfMC_DoAMD}" != "Yes"]?NOAMD) exten => 1322,n,AMD() exten => 1322,n,Set(CfMC_AMDValue = ${AMDSTATUS}) exten => 1322,n(NOAMD),Wait(1) exten => 1322,n,UserEvent(E1322-1,${CfMC_ActionID}=${CHANNEL} & ${CfMC_AgentToUse}

[2009-05-27 02:06:16.294] WARNING[6971] chan_dahdi.c: No D-channels available! Using Primary channel 24 as D-channel anyway! [2009-05-27 02:06:16.295] VERBOSE[6971] logger.c: [2009-05-27 02:06:16.295] == Primary D-Channel on span 1 up [2009-05-27 02:06:16.301] ERROR[6971] chan_dahdi.c: !! Got a UA, but i'm in state 7 I noticed the above error many days after this at around 2AM. This

I have a PRI line and I am having problems setting the ringtimeout on the dial application to more than 29. If I set ringtimeout to 29 on the dial application call and I do not answer the ringing phone then I correctly get DIALSTATUS set to NOANSWER. If I set ringtimeout to any value over 29 on the dial application call and I do not answer the ringing phone then I go to extension h and have

I issue this command: RetryDial(another-time,10,4,SIP/GXP280_18,10,ghM(cfmc_dial_private^RetryAndQ ueue^SIP/GXP280_18)) Asterisk rings the phone for 10 seconds. Asterisk then waits 10 seconds. Asterisk rings again for 10 seconds. I would expect this to happen a total of 4 times. The problem is that after the second ring for 10 seconds Asterisk exits the RetryDial step with HANGUPCAUSE=0 and