similar to: meetme application

Hello, I am running asterisk 1.4. For argument's sake I have 4 telephones. 2 support video, 2 do not. Calls between phones work fine and codecs are properly negociated. I have videosupport=yes in sip.conf and when the two video phones communicate I have video. I call meet me with this command EXEC MEETME 1234|d SIP looks like this : -- AGI Script Executing Application: (MeetMe)

Hi guys, Having a bit of a problem trying to get conference bridges working. In my meetme.conf file I have the following line [rooms] conf => 6000 In my extensions.conf file I have: exten => 1000,1,MeetMe,6000 My problem is that when I dial into extension 1000 it is telling me "this is not a valid conference number". Can anybody telling me what I'm doing wrong here?

Hi all, I'm using Asterisk 1.2.5 and , for some reason, when I install it, the module app_meetme.so didn't install. Is there some way to download that module, and add it to asterisk without re-install it? Thanks in advance Sebastian

Hello, Situation: I've got two asterisk 1.2.4 servers, connected to each other over the internet with IAX2 with about 20msec delay. One of the servers is hosting MeetMe. It's working fine as long as only SIP phones connected to the meetme server participate in the conference. As soon as a participant using IAX2 is connecting, lots and lots of buffer overruns and underruns are

I originally built my Asterisk server without installing the Zaptel package as it was going to be a purely SIP based system. However when I went to setup conferencing using meetme I found out that app_meetme is dependant on the ztdummy for timing. I have now installed the zaptel package and I believe the ztdummy module is loading ok [root@astro asterisk-1.4.0-beta2]# lsmod Module

Removed the DEPENDS_app_meetme=ZAPTEL from the file menuselect.makedeps And in menuselect.makeopts I removed the DEPSFAILED line that had meetme in it. It then compiled. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of ?? Sent: Thursday, February 01, 2007 9:01 AM To: Asterisk Users Mailing List - No Subject:

Hello ! In file app_meetme.c we can read A ZAPTEL INTERFACE MUST BE\n" "INSTALLED FOR CONFERENCING FUNCTIONALITY.\n" I receive message, when I try conference WARNING[28686]: File app_meetme.c, Line 151 (build_conf): Unable to open pseudo channel -- Playing 'conf-invalid' Does it means that I cannot establish conference without any hardware zaptel interface ??? What

I've got the ztdummy kernel module loaded and seem to have all the desired prerequisites in place, but Asterisk never seems to compile with MeetMe() application support enabled, nor does there appear to be a module I am failing to load that would contain this application. Is there something really obvious I am missing? Thanks, -- Alex Balashov Evariste Systems Web :

Hi! i have an error using the meetme aplication, and just dont work.. my meetme.conf is: [rooms] conf = 700 i calling from a sip phone, the extension number is 600. there is the error: Executing [700@numberplan-custom-1:1] MeetMe("SIP/600-09111e58", "700|MI") in new stack WARNING[20055]: channel.c:3024 ast_request: No channel type registered for 'zap' WARNING[20055]:

Good day! Have a weird problem with HT-286 and Conference room. I use Asterisk CVS-HEAD-06/04/04. Here it is: When HT-286 get into the conference room first and nobody in that room everything seems ok (with any codec HT286 allowed), but when HT-286 get into conference room when somebody already there, have got different HT behavior: 1. When HT use GSM codec => it connects to conference room,

When I call meetme: exten => 1000,1,Answer exten => 1000,n,Meetme(|||d) Asterisk is complaing with: -- Executing Answer("IAX2/xxx.yyy.142.204:4569-2", "") in new stack -- Executing MeetMe("IAX2/xxx.yyy.142.204:4569-2", "|||d") in new stack -- Playing 'conf-getconfno' (language 'en') Warning, flexible rate not

Is this patch correct? The "&&" doesn't make logical sense to me. I think it should be "||" and making this change fixes the problem I have with SIP phones in MeetMe conferences. If it's correct, is there someplace more formal that I should submit it to? *** app_meetme.c.old 2009-10-11 17:56:44.000000000 -0400 --- app_meetme.c 2009-10-17

Hi I'm browsing around the internet looking for signs that the IAX client library and app_meetme support video. I stumbled across this post by SteveK on the 27th of Feb 2006. "My company is looking to hire a full-time developer, who will be working about 25-50% of the time on iaxclient; in particular to finally integrate, build, polish and enhance video in iaxclient, add video

Hi, i was successful in compiling app_conference and setting up an conference was quite easy. :-) Does anyone knows if it is possible to have an IVR accessable from inside the conference. So, if i dialed into an conference i want to be able to press '*' and then the actual discussion is muted for me and i and menu is read to me. Something like the ${MEETME_AGI_BACKGROUND} in MeetMe.

*************** *** 41,50 **** APPS+=$(shell if [ -f /usr/include/linux/zaptel.h ]; then echo "app_zapras.so app_meetme.so app_flash.so a pp_zapbarge.so app_zapscan.so" ; fi) APPS+=$(shell if [ -f /usr/local/include/zaptel.h ]; then echo "app_zapras.so app_meetme.so app_flash.so a pp_zapbarge.so app_zapscan.so" ; fi) APPS+=$(shell if [ -f /usr/include/osp/osp.h ]; then

hi everyone: now ,i have a strange situation: I want to make a meetme conference and install the zaptel1.4* in my asterisk. every things seem well but it did't work normally. I use the Playback app for test .It didn't reply any voice.I tried in another asterisk server the playback app work well. i don't know why ,any some guys can give me some help? PS: my meetme app also didn't

I'm running 2.4.5 and app_meetme never plays conf-hasleft or conf-hasjoined with user names. I looked at app_meetme.c, but couldn't determine the cause. Any suggestions are greatly appreciated. exten => 600,1,MeetMe(600|i) I get the following: -- Executing MeetMe("SIP/jon-21f8", "600|aciMps") in new stack == Parsing '/etc/asterisk/meetme.conf': Found

Hi all, I'm configuring meetme in asterisk but no luck. I dont have a digium card, so based on the wiki, i have to install the zaptel driver and enable the ztdummy on it. I compiled, install the module and enable it on the module.conf. When i tried to start the asterisk, asterisk wont start because of the error in loading the meetme module. Jun 16 15:36:56 WARNING[-1084989312]:

As stated here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+MeetMe A Meetme room uses Ulaw as the audio codec, so if the other channels use different codecs, then * will transcode. Does the app_conference application works the same way? Or if i have SIP/g729 users and i create a conference with other users also at g729 asterisk will not transcode (when using app_conference)?