similar to: set caller id on outgoing calls through BRIISDNlines

Use Set(CALLERID(num)=9999999999) instead of using CALLERID(all). Remember to set this BEFORE you Dial. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 12:36 -->> To: asterisk-users at lists.digium.com -->>

I'm trying to set caller ids on outgoing calls. I have a quad BRI B410P card connected to my telephony provider. I know the list of DID numbers the provider assigned to my company. If I don't set the caller id then the callee always sees the same "top-level" number. If I set the caller id to a specific DID number we own, the callee keeps seeing the "top-level" number,

Hi. I'm running Asterisk server with 10 sip phones, and 2 grouped T0 lines with 10 DDI numbers. My provider is France Telecom and my setup is : - Debian Lenny - Asterisk 1.4 - Linux kernel 2.6.25.17 - mISDN 1.1.8 driver - Sip phones Thomson ST2030 No problem with the SIP . But when reveiving a call on RNIS line (any of the DDI numbers), the associated SIP phone rings indicating _two_

i am using asterisk 1.6.2 with mISDN and a passive AVM Fritz!card on CentOS 5.5. The only thing, i want to do is a call-redirection from an isdn-call to my mobile via sip-account. My extension conf is: general] static=yes writeprotect=no [globals] OUT_PORT=1 [ISDN] exten => 12345,1,Dial(SIP/012346737222 at sipprovider.local) If i call to the msn 12345, the SIP-call is going out, but after

hi i've configured a Beronet BN8S0 Card with misdn beronet utility. the card is configured with all lines in TE and P2P mode, and it is connected with the special cable with an ISDN connection. i've turned on debugging to level 4, this is the output from the asterisk cli when i receive a call: P[ 5] MGMT: Short status dinfo 1000001 P[ 5] MGMT: SSTATUS: L1_ACTIVATED P[ 5] handle_frm:

Hello everyone. I've got this really annoying HFC Cologne card (or however I should call it - a single channel ISDN card based on the HFC chipset). It wrongfully detects lots and lots and lots of incoming DTMFs, to the point the card is not usable. Here's a sample out of CLI: P[ 1] I IND :DTMF_TONE oad:206361 dad:520101 P[ 1] --> mode:TE cause:16 ocause:16 rad: cad: P[ 1] -->

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

Hi, Hi All, I've just delved into the world of asterisk and I'm having a few dtmf issues. Internally, amongst sip phones, dtmf is fine. Externally, if you ring from a GSM mobile, DTMF is fine, however if you ring from a standard phone, DTMF fails to register. I am attempting to use a quad port HFC-4S Beronet Card. I've been searching the web most of the last week and

Just to add.... P[ 1] Transmitting 128 samples 2 misdn P[ 1] writing 128 bytes 2 asterisk P[ 1] Sending :160 bytes 2 MISDN P[ 0] misdn_jb_fill: written:160 | Buffer status:256 p:861fee0 P[ 0] misdn_jb_empty: read:128 | Buffer status:128 p:861fee0 P[ 1] Transmitting 128 samples 2 misdn P[ 1] writing 128 bytes 2 asterisk P[ 1] PH_CONTROL: channel:1 oad2:07nnnnnnnnn dad0:820055 P[ 1] --> DTMF

I'm running a setup with chan_misdn on a austrian PTP-line. When somebody dials in without an extension, he gets a busy signal. I don't see the call at all in asterisk. I *have* set immediate=yes in misdn.conf. And I *do* have an s-extension in my dialplan for the context used by misdn. Calls that provide an extension work fine. Attached is my misdn.conf and a verbose 3, misdn set debug

Hi I have beronet BN8S0 isdn card in my asterisk and , card is working fine, but when I try to dial to special number 118913 ( telephone number information) from polish telecom TPSA, I always geting timeout . Bellow is isdn signaling dump : --> * CallGrp: PickupGrp: --> rxgain:0 txgain:0 --> * dad:118913 tech:mISDN/2-u25 ctx:default --> * Setting Context to from-tpnet -->

Hello, After upgrading my kernel to mISDN-1.1.1 while keeping asterisk-1.2.16 I no longer match any extension. Apparently the "dad" is empty. However I can see the number just before it (146472130): P[ 4] I IND :SETUP oad:!?145201798p ?146472130 dad: ?146472130 pid:2 state:none P[ 4] EXPORT_PID: pid:2 Mar 23 09:35:28 WARNING[6725]: chan_misdn.c:4750 chan_misdn_log: Extension can

Hi, Since a week ago I am trying to get chan_misdn working with asterisk 1.4.19, using HFC based ISDN card on Linux 2.6.22. My setup is done as detailed on wiki and FAQ. * mISDN and miSDNusers are 1.1.7.2, unpacked, build and installed. After installation and misdn-init, I have this: aragorn:root/pts/1: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) ->

Does the domain administrator SID always end with -1000? I.e., if the SID for the domain is: S-1-2-33-4444444444-555555555-6666666666 does this mean that the domain administrator's SID would be: S-1-2-33-4444444444-555555555-6666666666-1000 ? How can I get the SID number for any given user? -- Tomek http://wpkg.org WPKG - software deployment and upgrades with Samba

Hello, I'm trying to get started with asterisk/SIP so I was trying the demo that is provided in the extensions config file, but the call isn't "answered" by my server when I try calling the number that I registered at my SIP provider. I've registered with register => John.Doe:MyPass:MyUser@my-sip-provider/1000 in sip.conf and if I use "sip debug" I can see the

We just installed an Asterisk 1.4 system and have a Polycom 501 phone we are using to test it. We have a PRI installed as well and it works well. The problem.... When a call is incoming, the caller id says: 9999999999 sip:9999999999 at 10.0.0.1 how do you get it to just say 9999999999 and remove all of the rest? Thanks

I've completed the configuration specified, and the command 'wbinfo -g' provides a list of the groups available and 'wbinfo -u' provides a list of all the users on the system, but I cannot access the shares; When I navigate a file explorer to \\ip.ad.dre.ss I am presented with a login screen, which I cannot log into with my ID; 'The user name or password is incorrect'

I'm trying to join my FC6 box to our Active Directory domain. For the most part the setup was pretty straightforward, but it just doesn't seem like winbind separator is being honored. When I do a 'getent passwd' I get the following: AVWORLD\johnXXXX:*:16782801:16777216:XXXXXXXX:/home/AVWORLD/johnXXXX:/bin/bash

I set up a context to allow me to call in to my * server (via Teliax in this case using IAX2) from my cellphone, and let me do a number of things, including dial other extensions, AND dial outbound again so callers could see my proper work CallerID when I use this service. Is there a way to be able to transfer calls to other extensions of my asterisk server FROM the cell phone/ This isn't a

I set up a context to allow me to call in to my * server (via Teliax in this case using IAX2) from my cellphone, and let me do a number of things, including dial other extensions, AND dial outbound again so callers could see my proper work CallerID when I use this service. Is there a way to be able to transfer calls to other extensions of my asterisk server FROM the cell phone/ This isn't a