similar to: no dial tone tdm400p

Dear All The setup is te110p with an 8 channels PRI to make and receive all calls. SIP phones throughout the company. TDM400p with 4 FXS modules to send/receive faxes and make credit card transactions. I have an analogue phone on the tdm400p for testing. I can receive calls to the exten. There is a dialing tone. However, when I try to make a call I get a busy signal. Asterisk stated busy then

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

I've got the latest zaptel and cvs asterisk software loaded on my phone server running FC3. And yes, It's fully updated and udev is setup correctly. I've got a TDM400P with one FXS and one FXO module installed. When I load zaptel and wctdm and run ztcfg -vvv, I get this: [root@asterisk ~]# ztcfg -vvv ZT_CHANCONFIG failed on channel 1: No such device or address (6) Zaptel

Hi, I am having some trouble getting a TDM400P working, and would be very appriciative of some ideas. I have installed a TDM400P, and downloaded the appropriate files from CVS, compiled, installed and modprobe'd the devices.

Experiencing one way audio using IAX2. I did see some other posts on this, and see there may be some internal issues with asterisk and one way audio. Can this be a widespread problem? So many seem to be using IAX, I find it puzzling. Some information points to this being a problem on asymmetrical connections. This is a decidedly asymmetrical connection, with 1.5 Mbs download and 256 kbs,

I installed the TDM400P and installed it on a system running on Fedora Core1, please refer to the steps below. I connected an analogue phone to the FXS port. When I pick up the speaker I don't hear the dialtone although when I press a number key I hear a DTMF generated. What could be the problem? I appreciate your help 1- First I installed the TDM400P in the PCI slot and connected

I've got a bit trouble with callerid and zaphfc cards. Basically zaphfc doesn't add the "0" in front of national numbers (haven't tried a international call yet). With chan_capi that allways worked fine, however i had to define the national and international prefixes in capi.conf. Is there something similar in zapata.conf ? Here is my zapata.conf: [channels]

I have an intermittent problem with the one FXS line that I have. On most calls, the first ~5 seconds of the call has a loud buzzing noise on the line. After 5 seconds or so, it fades off to nothing, and the sound quality is great. Searching for "buzzing" on the list doesn't give a whole lot to work with. The buzzing happens on calls that are routed over both my FXO line and

We just bougth a tdm2400p with all the modules for FXO, but we are having some troubles with the card, cause it aparently is stripping some digits from the dialed number, we tested the same server with a tdm400 and everything worked as expected. We?ve already added "w" before the dialed number with no results, is there any way to solve, is it a bug thanks

Hi all, I'm trying to insert a Rhino Ceros box equipped with a Rhino R2T1 dual-T1 card and running the latest version of Trixbox (2.4.2) between the central office and a Nortel Option 11. The switch at the CO is a DMS100. Basically, I'm taking the T1, connecting it to port 0 on the R2T1 card, and then connecting port 1 to the Nortel. (Actually a CSU and then the Nortel) We're running

Hi, I am trying to do the world's most simple install. I have a Wildcard TDM400P with 3 ports: 1 FXS on port 1 and 2 FXOs on ports 3 and 4. (i'm not using port 3 for now, put want it for expansion purposes) I simply (to start with) am looking to have the FXS phone ring when an FX0 port is dialed. I would also like to be able to place outgoing calls on the FXS through the FXO. Right

Hi all, this time with the complete configuration files... We need help with our SuSe9.2 asterisk box We have one QuadBRI and one TDM40B in an ASUS pundit R-2 barebone. We have downloaded the bristuff (0.2.0-RC7j) and installed it without problems. once we downloaded and compiled asterisk, zaptel and all other stuff, the module installation succed in this order: modprobe zaptel modprobe qozap

Hopefully someone here can save my sanity. I have been trying to solve this problem for days now, but just cant put my finger on it. Im new to * so I have probably done something stupid! I have a TDM400P with one FXO module and a FXS module. The main problem I have is not being able to get the extension attached to the FXS module to ring or be able to make calls. It gets a dialtone fine but I

Hello, I'm running * on a very basic configuration. I have a Wildcard TE405P with the first T1 connected to a PRI line and the remaining three to Adtran TA750 channel banks with FXS modules. I successfully configured everything to work with a couple of Swissvoice IP10S handsets (MGCP) and analog extensions connected to the channel banks. The problem I'm having is that when I pick up any

I have just finished installing a new asterisk box at my work. The box is quite hefty, dual Zeon 2.8s with SCSI drives and 2Gb of memory. I have a 4 port Digium T1 card for channel bank and PRI access. I activated a PRI from a local CLEC (DMS-500 based, National protocol). This PRI is on slot 2 of the card and is set as the primary timing source. It is ESF/B8ZS. All the software is latest

I have a setup with a polycom 601 and an act p160s. All on local segment, no NAT. Can call the act p160s, from the polycom, rings, connects, and a conversation can take place. The reverse is not true, Dialing from the act to the polycom does not work. SIP debug shows, at the end, "Incoming call: got sip response 416 "unsupported URI Scheme" back from 192.168.0.xxx. Which is

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local

Was messing with a polycom 501 and changed the IP from dhcp to static. Working with a user remotely. Now, the user says the phone does not show anything on the LCD and does not respond to any buttons. When rebooting, there is text shown as it proceeds. ?? Is there a way to reset this to a default? Does not respond to ping on the address we set. joe a.

Is Zaptel no longer available? I returned to a long shelved project (using TDM400P and a customized, canned version of *) and, getting to the configuration, find wctdm is not there. I recall the authors where very "enterprise" oriented and focused on T1 cards. So they left analog support out. Anyway, before I abandon all hope and dive into the "new stuff", I thought I would

Hi all, I've setup a PBX in production environment last week but we have immediatly find out drop conversations and lot of errors (in asterisk logs) like: Apr 10 17:30:48 NOTICE[25154] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 My configuration is: Motherboard: SuperMicro P8SCT (Intel E7221 chipset) Hypertrading and APIC enabled CPU: P4 3GHz Digium TE205P